Saturday, December 16, 2017

Youtube daily report w Dec 16 2017

this one is the "slimy" man,

they look similar, but they taste differently!

this is the typical japanese breakfast.

Seba is going to a shop, that is specialized in Natto

the Natto is a typical dish in Japan

that Seba already tried when St3pny came to Japan,

but St3pny didn't appreciated it that much.

Today we get to know a typical japanese breakfast,

and I can say that you will miss the cappuccino and croissant

this dish is slimy,

but tasty, as Timon said: you need to try it!

and if the normal Natto is not enough, you can try the Natto Yakisoba,

Natto-donut, Natto-senbei, Natto with chocolate, and so on...

Natto for everyone!!

Nice! In Japan we still have the dvd rental! ok, but today I'm not talking about that

look, we are going in this restaurant today, it's already full of people

this one is Sendai-ya it's a Natto shop

so it's this shop, where they have all kind of Natto things,

the lunch time is from 11 to 15pm

and it's an all you can eat restaurant, so you can eat everything until you explode!

then we have the ---

do you know what Tororu is? it's also slimy and they usually do a combination of slimy + slimy

and you can also ask for more rice for free...

let's go inside and let's take a look.

all this Natto!!!

this is the slimy man!

here we are, let's go outside for a moment, I just ordered

look at all this stuff! we have the Natto-soba,

there is Natto-candy,

little fish with Natto,

Natto-donuts,

this are the Senbei, they are similar to the ones that I gave to the deer,

then we have Natto soup,

basically you can do everything with Natto,

one time I found the Natto with chocolate in Ikeburo

a lot of stuff!

this one is powder that you can add to your rice, it's the Natto version

I like a lot Natto

Here we have donuts with cinnamon and nuts

with the addition of Natto.

There are a billion of different Natto things!

If you don't like Natto, this shop is not made for you!

At the outside you can also take different Natto, that cost between 1-2€

without this sun you would see it better

well, every part of Japan has a different Natto,

and then there are different types, there is this one edamame flavoured,

and then there are also other flavours,

and here we have the same donuts, like the ones inside

so, with this you can have Natto 24hours a day.

let's go inside, maybe it's ready!

This one is the Natto from Sendai and you can basically eat Natto until you die!

because it's all you can eat.

you can also have the Tororu, it's another slimy vegetable,

or you can have another one with salmon, it's the one that I took,

and then you can also choose the one with Natto, pork and rice, but I wasn't very sure about it

well, Natto is all you can eat,

but, you have the possibility to choose all these differrent types of natto,

a Natto with peas...I don't know how to say it!

this one is edamame flavour and this one with guma

I took...they look similar, but the taste is different

this one is with big ones,

and this one is with edamame.

However you have a lot of choice!

I took the one with wakame (seaweed)

well, there are a lot of different types, a lot of foreigners don't like it, but I actually like it

you put some soy-sauce,

and then a little bit of mustard

you mix it

I like it a lot, I recommend to try it

you will need some time to get used to it, and the japanese people usually eat it for breakfast.

other Natto came...this one is wakame and this has two different types of seaweed.

It looks strange, but this is a japanese breakfast and I assure you that it's really good

and it's healthier than the common croissant with the capuccino.

other 2 Natto came!

this one is the Natto cut in tiny pieces

my friend is also adding the soy-sauce and the mustard,

ah no mustard, he mix

it's a mix of raw egg and Natto

who wants to try it?

you usually put it on the rice, but he likes it this way...

write in the comments if you want to eat this delight made in Japan

1-2-3-4-5-6-7-8

we just ate 8 different types of Natto, all with different flavours!

I also brought here the Mates (italian Youtubers)

but they didn't like it that much, maybe I leave you some clips

In any case I wanted to challenge St3pny,

to see if he will eat more the next time that he comes to Japan.

See you tomorrow, always at 2pm (GMT+1) CIAO!

For more infomation >> JAPANESE BREAKFAST WITH NATTO by Sebastiano Serafini with Lilletta Ely in Japan - Duration: 5:36.

-------------------------------------------

As Músicas Mais Tocadas de 2017 (Nacionais) - Duration: 5:30.

For more infomation >> As Músicas Mais Tocadas de 2017 (Nacionais) - Duration: 5:30.

-------------------------------------------

Desenho educativo para 6 anos. Carro educativo. Máquina Português desenho animado. Animação infantil - Duration: 4:02.

For more infomation >> Desenho educativo para 6 anos. Carro educativo. Máquina Português desenho animado. Animação infantil - Duration: 4:02.

-------------------------------------------

What is fracking? - Duration: 1:30.

Smart Learning for All

What is fracking?

A dance form.

Deep inside the earth, there is a layer of shale rocks.

These rocks contain fossil fuels like oil and gas in their pores.

To extract these fuels, a technique called fracking or hydraulic fracturing is used.

In fracking, a vertical well is drilled into the layer of shale rocks.

Then, the drill is turned by 90 degrees and drilling continues horizontally.

When the targeted distance is reached, the fracking well is encased.

Then, a perforating gun is inserted in the well.

When the perforating gun reaches the required distance, the rocks are perforated.

Then the perforating gun is removed and a fracking fluid is pumped in the well.

This fluid builds pressure in the perforations creating cracks in the rocks, thus releasing the fossil fuels.

These fuels and the fracking fluid are then drawn to the surface.

For more educational videos please visit http://www.SmartLearningforAll.com

Also, don't forget to subscribe to our YouTube channel.

For more infomation >> What is fracking? - Duration: 1:30.

-------------------------------------------

GF Vip, Giulia De Lellis choc dopo il reality: 'Volevano sporcarmi' | Wind Zuiden - Duration: 3:32.

For more infomation >> GF Vip, Giulia De Lellis choc dopo il reality: 'Volevano sporcarmi' | Wind Zuiden - Duration: 3:32.

-------------------------------------------

Альберт Эйнштейн: Жарық неліктен бөлшек? - Duration: 1:19.

For more infomation >> Альберт Эйнштейн: Жарық неліктен бөлшек? - Duration: 1:19.

-------------------------------------------

How to make a DIY mask for a Minecraft costume - ep04 - Roland Master Maker - Duration: 15:53.

In this episode I'll be making a face mask with a hydraulic opening inspired by the videogame

Minecraft.

I'll be using simple materials and custom prints by Roland.

Hi folks, I'm Custom Cez and I welcome you to this new episode of Roland Master Maker,

the web series where I'll document a number of custom projects hoping to inspire you to

do some amazing things in your own home.

During the process I'll show you some of the incredible machines that Roland has to

offer.

Today I'll be making the face mask for a Steve cosplay or Halloween costume, the main

character from the game Minecraft.

The face mask will also have an Hydraulic front opening to make it more fun.

If you'd like to build this project yourself you'll find downloadable blue prints and

graphics on our facebook page, just follow the link in the description and join the fun.

All the things needed for this build can be found at a pharmacy, like the syringes and

the tongue depressants, and in good hardware store.

I take a polycarbonate panel measuring 130 by 100 centimeters, 6 millimeters thick.

I need to draw the shape necessary to build Steve's head, luckily for us it's shaped

like a simple cube.

To draw the details, like the front opening and the eyes, I like to use a caliper because

once you set it to a certain measurement it can be used to mark many points.

As I've mentioned the polycarbonate panel is 6 mm thick.

In order to bend it I need to remove a strip of material from one of the two sides along

each of the bends.

These cuts are drawn with a red marker.

The drawing is done, I can now go ahead with the cuts.

This can be a dangerous job so make sure you do it safely, younger kids need to be assisted

by an adult.

I use a steel square to help guide the blade and make clean, straight cut.

When the cut is parallel to the polycarbonate internal support ridge, cutting is quite easy.

On the other hand, when the cut is perpendicular to it, like in the case of this eye hole,

it can be a bit harder to do.

As you can see trying to cut across each ridge seems to be a good way to go.

Once I've cut the hole for the head on the panel I can start removing the excess polycarbonate.

I then make sure the front opening is free to move…

I open the eye holes…

And the head hole.

The last step in the preparation of the panel is making the incisions for the bends.

I have to make sure I cut only one side of the panel.

After the incisions are made, I need to remove the strip of material between the two cuts.

As you can see the other side of the panel is left untouched.

This allows me to bend the material and at the same time to keep all the sections of

the cube together.

I proceed with performing all the other incisions

The structure of the cube is ready for the glue gun.

I begin hot gluing its corners from the inside.

The bend comes out nice and sturdy… so I can continue gluing all the other corners.

To close the last side of the cube I have to shorten a bit the last panel section, but that's ok

The box is ready, now let's tackle the function side of the project.

I want the front section to slide up.

To do it I'm going to use a hydraulic system made with syringes.

So, first thing I need are the actual syringes, four in total.

These are the biggest ones I've found.

Since I'm going to use them as a linear actuator, their length will determine the

amount of travel the front section will be able to do.

I've discarded the needles, I don't need them.

I place the first syringe inside the box along the vertical side of the opening and mark

the location of the needle hub on the bottom of the box.

Using a drill I make a hole that will allow the entire hub to protrude from the bottom

of the box.

I drill another two holes that will allow a zip tie to secure the syringe onto the box.

I do the same for the other syringe on the opposite side of the opening.

The tongue depressor has to be now cut in half.

I hot glue one piece of tongue depressor to each of the plungers, with one side going

towards the opening.

It needs to be close to the side wall but free to move, so I'm careful with the glue.

It goes like this!

I can now use a liberal amount of glue to weld the other extremity of the depressor

to the sliding panel.

First one side… then the other.

Now let's build the "propulsion" system.

I need two plastic hoses, they need to be able to fit onto the syringe's hub.

Once inserted, I can secure them with a couple of zip ties.

Then the syringes are glued and zip tied together.

I use another piece of tongue depressor to pair up the two plungers so that they will

be forced to travel together... and this is the result.

Now I can fit the other sides of the hoses to the syringes in the Minecraft helmet...

And there you go, push the plungers and the door slides open… pull the plungers and

door slides shut.

Very nice!

The only problem right now is that it looks like a box, a cool box, but just a box none

the less.

To make it look like our friend Steve from Minecraft we are gonna need a bit of Roland

Magic!

Did you recognize me?

I'm wearing my minecraft mask, but it wouldn't be a proper Minecraft mask until it has Steve's

face on it and we are here at Roland just to do that.

We are going to use that machine to print and cut vinyl sheeting which will become some

sort of Steve skin which will stick onto our mask.

So let's get to it.

I'll use a printing and cutting plotter, the Roland TrueVIS, to turn a self adhesive

vinyl sheet into a Steve skin that will give a much needed realistic touch to the

Minecraft mask.

The Roland TrueVIS begins printing the design that I have prepared in my studio at very

high definition onto the vinyl.

Remember that the design is available for download on our facebook page, just follow

the link in the description.

This plotter model can print up to 160 cm wide so it's perfect for my project.

This type of technology is usually used to create those prints and wraps that you see

on buses and store fronts, but I think that our purpose for using it is much more fun.

In less than 10 minutes the print is ready, but it's not done.

Now the Roland TrueVIS starts to cut the contour of the print using a precision blade that

moves across the vinyl just like the printer head.

The feed rolls move the sheet back and forth positioning the cutting blade in the right

spot.

In no time at all all the cuts are done.

Since I was at the Roland headquarters I couldn't pass the opportunity to make a few other items

inspired by the video game for my son.

He is a big fan!

In less than half an hour I've managed to personalize: a plastic folder for all his

drawings, using a Versa UV printer…

A nice pillow for his bedroom...

And a pencil case.

If you'd like to see in details the making of these objects you can scoot over to the

Roland DG youtube channel where I'll be uploading some more videos.

You'll find the link in the description.

Now that the vinyl sheet is ready, printed and cut, let's go and transform my simple

box in a proper Minecraft helmet mask!

Now that I've got everything I need to complete the Minecraft helmet mask it's time to get

to work.

The plotter was programmed to cut only the vinyl sheet and not the support paper.

So, armed with a pair of scissors, I remove the excess paper.

Here you can see the very fine cut made by the plotter.

In order to simplify the process of sticking it to the box, I temporarily cover the cuts

with painter's tape so to avoid deformations during the application process.

On the blue prints, available for download, I've included a drawing that specifies the

order in which the panels have to be attached to the box.

To do so I need to separate the paper back of each different section of the vinyl sheet,

otherwise, if removed all at once, we would risk it sticking to itself.

Let's start with the first face, the front one.

This is a very delicate step in the build.

The positioning of the first face will influence all other face.

Once the vinyl is in place I need to remove the air bubbles between the box and the cover.

You can use your fingers or a little plastic spatula.

After the first face the rest of them are a breeze.

The next one is the top face…

and it's little flaps.

The bottom face is next, but I need to make two little holes to allow the syringes to

go through the vinyl.

Then I use a blade to adapt the sheeting to the head hole.

Now I can apply the adhesive to the back side...

and the flaps.

And last the two sides.

They'll cover all the little flaps from the previous faces and we'll end up with

a nice and clean coverage of the entire box.

The painter's tape can be removed at this time, as well as the last air bubbles and

I can do a first test.

It looks good.

For the kid to be able to wear the mask I got a bicycle helmet.

To make it fit inside the mask I'm going to use some polystyrene…

I cut it to size…

And I glue it to the helmet.

Now I have four suitable points I can glue to the box: the top, the back and the two

sides.

With a bit of patience I manage to glue the helmet to the box, so now I can permanently

attach the hoses to the syringes using glue… and zip ties.

This is the moment of truth!

My son Dylan is gonna be the guinea pig.

The bike helmet seems comfortable and secured to his head.

The opening system works like a charm and I'm sure that this Minecraft helmet mask

will be very popular at his next costume party.

Here you can see all the objects I've customized with the Minecraft graphics.

The mask can even be placed over a lamp so that it can double as a night light.

If you liked this project don't forget to click the like button and subscribe to receive

a notification when i publish a new video.

I want to thank Roland for their support and I invite you to visit their channel Roland

DG where you can find bonus content.

This is it for now, I'm Custom Cez for Roland Master Maker and I'll see you next time.

For more infomation >> How to make a DIY mask for a Minecraft costume - ep04 - Roland Master Maker - Duration: 15:53.

-------------------------------------------

Starve.io HOW TO HUNT POLAR ANIMALS, TIPS & TRICKS - Duration: 11:22.

tips & tricks on killing polar animals

wolfs are even faster this update

wolfs move slower in one direction

wolfs are faster moving in curclar motion

tip no.1

hit 1x and run away till your safe

tip no.2

fight around campfire to stay warm

tip no.3

in extreme situation keep 2 campfires

you can hit polar bears more times

they are much slower

carrying a pick

doesnt slow you down

as the sword. So you can hit more times

practice. have fun?!

2 campfire remember?

and going straight, slows them down a bit

???

you are dead

you froze to death. so sad

your team was destroyed

going for revenge...

charge!

rip count: 1

rip count: 2

2 down

2 more spikes

i used 8 -.-

rip count: 3

noob spiking

rip my friend :(((

what?

thanks for watching!

For more infomation >> Starve.io HOW TO HUNT POLAR ANIMALS, TIPS & TRICKS - Duration: 11:22.

-------------------------------------------

GF VIP, la battuta di Costanzo sul trionfo di Daniele Bossari che fa discutere - Duration: 5:13.

For more infomation >> GF VIP, la battuta di Costanzo sul trionfo di Daniele Bossari che fa discutere - Duration: 5:13.

-------------------------------------------

Bathing Fun Colors for Kids | Colors Shower With Peppa Pig Soccer Balls - Duration: 2:28.

Bathing fun colors for kids

colors shower with peppa pig soccer balls

Learn colors with peppa pig

Blue color - George pig

Orange Color - Mummy pig

Red Color - Peppa Pig

Green Colors - Daddy pig

Learn Colors Peppa pig soccer balls dye coloring

For more infomation >> Bathing Fun Colors for Kids | Colors Shower With Peppa Pig Soccer Balls - Duration: 2:28.

-------------------------------------------

300lbs Of Guwop

For more infomation >> 300lbs Of Guwop

-------------------------------------------

Renault Talisman Estate 1.6 DCI 130 INTENS | 8,7" R-LINK | BOSE | EASY LIFE | TREKHAAK - Duration: 1:00.

For more infomation >> Renault Talisman Estate 1.6 DCI 130 INTENS | 8,7" R-LINK | BOSE | EASY LIFE | TREKHAAK - Duration: 1:00.

-------------------------------------------

The ER Kit by Dab Design - BMW R nineT custom kit - Duration: 2:55.

For more infomation >> The ER Kit by Dab Design - BMW R nineT custom kit - Duration: 2:55.

-------------------------------------------

طاح من اعلى قمة اللعبة..! |( اخطر خمسة العاب)!!! - Duration: 4:05.

For more infomation >> طاح من اعلى قمة اللعبة..! |( اخطر خمسة العاب)!!! - Duration: 4:05.

-------------------------------------------

Arkanoid juego retro game play - Duration: 4:37.

For more infomation >> Arkanoid juego retro game play - Duration: 4:37.

-------------------------------------------

"Nunca falei em R$ 500 mil", diz Radamés sobre separação de Viviane Araújo - Duration: 4:09.

For more infomation >> "Nunca falei em R$ 500 mil", diz Radamés sobre separação de Viviane Araújo - Duration: 4:09.

-------------------------------------------

How I Make Money Online

For more infomation >> How I Make Money Online

-------------------------------------------

Johnny Hallyday- comment a-t-il choisi sa tombe à Saint-Barth ? - Duration: 1:44.

For more infomation >> Johnny Hallyday- comment a-t-il choisi sa tombe à Saint-Barth ? - Duration: 1:44.

-------------------------------------------

Opel Astra INNOVATION 1.0T 105PK | NAVIGATIE | INNOVATION+ - Duration: 1:02.

For more infomation >> Opel Astra INNOVATION 1.0T 105PK | NAVIGATIE | INNOVATION+ - Duration: 1:02.

-------------------------------------------

Geniuses Who Were Actually Terrible People - Duration: 5:27.

Sometimes it seems like the world has far too many jerks and not enough geniuses.

However, it turns out that being a jerk and being a genius aren't mutually exclusive.

In fact, some of the most famous minds in history have belonged to some of humanity's

most colossal creeps.

Here's a look at some geniuses who were actually terrible people.

Isaac Newton's insane pettiness

Sir Isaac Newton is up there with the greatest scientists of all time.

Among his many accomplishments, he managed to invent calculus, figure out the three laws

of motion, and discover gravity.

He was also constantly involved in petty disputes with other scientists about just how much

credit he should get.

Mathematician Gottfried Leibniz is perhaps his most famous adversary, but that's partially

because Newton allegedly went out of his way to completely erase another rival from the

history books: Robert Hooke.

A brilliant scientist called the "English Da Vinci," Hooke and Newton disagreed on many

things, including whether or not Hooke should get credit for his contributions to the theory

of gravity.

Once Hooke died, though, the argument was over, as Newton went on a smear campaign to

tarnish Hooke's reputation.

Newton allegedly may have been behind the destruction of the only known contemporary

painting of Hooke to ensure history would forget Hooke's face, a move known in scientific

circles as the Theory of Total Pettiness.

Nikola Tesla believed in eugenics

If you're not familiar with eugenics, it's the idea that mankind should be bred for specific

mental and physical traits in order to create what some might term a "master race."

At least, that's what the Nazis were aiming for with their program of eugenics, but Hitler

wasn't the only one in favor of the idea.

Genius inventor Nikola Tesla was all about it too.

Yup, that's right.

In 1935, right as the Nazis were coming to power, Tesla wrote an article for Liberty

magazine predicting that by the year 2100, eugenics would be all the rage.

He wrote:

"In past ages, the law governing the survival of the fittest roughly weeded out the less

desirable strains.

Then man's new sense of pity began to interfere with the ruthless workings of nature.

As a result, we continue to keep alive and to breed the unfit.

The only method compatible with our notions of civilization and the race is to prevent

the breeding of the unfit by sterilization and the deliberate guidance of the mating

instinct."

Tesla went on to applaud the sterilization of criminals and people with mental health

disorders, but wanted governments to make marriage more difficult to ensure only people

viewed as desirable parents would be allowed to breed.

Yikes!

Steve Jobs was a tyrant

Apple visionary Steve Jobs was reportedly a jerk to nearly everyone he came in contact

with.

The list of offenses is nearly endless, from firing people with no warning and no severance,

to cursing out his employees, to asking people during job interviews if they were virgins.

In one famous incident from the birth of the company, Jobs was offered a large bonus to

do a job for Atari.

Instead, he got his friend Steve Wozniak to do it and lied to him about how much they

were being paid, only giving him a small percent of the fee.

But he was perhaps worst to his daughter Lisa, whom he denied was his daughter even after

a DNA test proved it.

She ended up on welfare while he enjoyed his millions.

But hey, at least we all have cool phones now, right?

Albert Einstein was a terrible husband

Einstein is pretty much required to be on any list of geniuses.

But one person who probably didn't think Einstein was all that was his long-suffering first

wife, Mileva Maric.

In 1912, Einstein began a relationship with his cousin Elsa.

Needless to say, Mileva wasn't pleased.

In 1914, Einstein delivered a letter to his wife detailing a list of demands she had to

meet if she wanted to stay married to him.

She was required to make his meals and clean his house, but wasn't allowed to talk to him

unless given permission, and was prohibited from requesting any kind of affection or intimacy.

What a great deal!

Instead, the couple separated later that year, and once the divorce was finalized, Einstein

just went ahead and married his cousin.

Oh, and some people think he took credit for her work, too.

So that pretty much stinks all around.

Elia Kazan's witch hunt

The brilliant director behind classics like On the Waterfront, East of Eden, and A Streetcar

Named Desire, Elia Kazan also helped found the prestigious Actor's Studio.

So you'd expect him to be beloved in Hollywood.

In reality, though, he ended his life an outcast.

Why?

Well, at the height of the red scare in 1952, he was called before the House Un-American

Activities Committee and asked to give up the names of suspected communists in Hollywood.

He happily complied, and even took out an ad in the New York Times urging other people

to participate in the witch hunt.

The eight people he named were blacklisted from Hollywood, their careers destroyed.

Kazan, on the other hand, won the Oscar for Best Director three years later for On the

Waterfront, a movie about how being a snitch is totally cool.

"You're a cheap, lousy, dirty, stinkin' mug!

And I'm glad what I done to you!

You hear that?!

I'm glad what I done!"

Times change, though, and in 1999 was Kazan was given the Oscar for lifetime achievement.

Actors including Sean Penn took out an ad decrying the decision.

On the night, hundreds of protesters were outside the broadcast.

When he received the award, actors like Ed Harris and Nick Nolte refused to stand up

for him or even clap.

"In the last circle of hell are all the traitors, right?

And there's one down there for Elia Kazan."

For his part, though, Kazan never regretted his actions, writing in his 1988 autobiography

that it was an example of his, quote, "true self."

"Do you regret the decision now that you did that?"

"No, I don't.

Um, the opposite."

Thanks for watching!

Click the Grunge icon to subscribe to our YouTube channel.

Plus check out all this cool stuff we know you'll love, too!

For more infomation >> Geniuses Who Were Actually Terrible People - Duration: 5:27.

-------------------------------------------

Responding To Unusual Situations (Death, Sad, Unexpected Gift, Fired) Free English Lessons - Duration: 11:17.

For more infomation >> Responding To Unusual Situations (Death, Sad, Unexpected Gift, Fired) Free English Lessons - Duration: 11:17.

-------------------------------------------

WHAT HAPPENED TO THIS MAN WHEN HE GAVE UP SUGAR, DAIRY, GLUTEN & - Duration: 6:44.

WHAT HAPPENED TO THIS MAN WHEN HE GAVE UP SUGAR, DAIRY, GLUTEN & COFFEE FOR AN ENTIRE

MONTH

BY ALANNA KETLER

Most eat foods that don�t agree with our bodies for our whole lives, and because we

are so used to how they make us feel, we often don�t realize how much better we could feel

if we were to cut some of these trigger foods out of our diet.

Common triggers include sugar, dairy, wheat, and fried foods.

When we eat inflammatory foods on a regular basis, our bodies become used to them, and

we don�t realize they are causing a reaction until we actually remove them from our diets.

Recently, a man name Lachian Brown decided to give up these three trigger foods, as well

as coffee, and even he was surprised by what happened.

A self-proclaimed food-a-holic, Brown loves to eat, anything and everything.

However, he recently noticed that his love of food was catching up to him and his stomach

was getting bigger.

After a few girls told him the same, he decided to check the scales, and was dismayed to learn

he had gained seven kilos in six months.

He attributes the weight gain to the fact that he had spent those six months travelling,

working on his computer and eating french fries, coke, and beer nearly every day.

Yep, that�ll do it.

After receiving an email for a one-month detox program, he decided to make a change.

The detox program called for him to remove soda, alcohol, sugar, gluten, fruit juice,

coffee, eggs, and dairy from his diet.

This was a huge change for Brown, as virtually all of his favourite foods fit into those

categories.

The program taught Brown how those kinds of foods usually contain additives that can negatively

affect your physical and mental health.

So What Did Brown Eat for the Month?

He kept things fairly simple and ate mostly organic vegetables, chicken, pork, fruit,

rice, and potatoes.

He ensured he was having large servings of vegetables and salads every day and swapped

his coffee for green tea � four to five cups a day.

What Did He Notice Right Away?

In the first few days Brown was feeling constantly hungry.

His energy was also getting depleted soon after waking up in the morning, likely from

the caffeine withdrawal symptoms.

Prior to this cleanse, he had been having three coffees a day and at least one Coca-Cola,

which amounts to a lot of caffeine.

It�s no surprise he was feeling depleted.

After one week, he started to feel more awake.

Here�s what he noticed:

1) Sustained Energy Throughout the Day After the week of death, my body started to

fee fresh when I ran in the morning.

I also felt more mentally awake in the morning.

The best bit?

It was sustained.

I�d been on an even keel for the whole day, whereas in the past I�d have huge jumps

of energy when I had coffee and massive come downs later in the day.

2) I Lost 3 Kgs in a Month Pretty good effort I must say so myself.

My stomach felt lighter as well.

Before this I�d usually have 1-3 beers at night (and sometimes more when I had a crazy

big night.)

That�s probably the reason I�d wake up feeling bloated in my stomach.

But now, it�s different.

I feel less full and fat.

I�ll admit, it was difficult giving up drinking beer for a month.

It�s such a social thing to do.

Plus I love it.

But in the end it was well worth it for my body.

I also found that my moods were more stable.

I�m generally a happy guy, but I can certainly get angry and irritable at times.

But during the past couple of weeks.

I�ve mellowed out a little more.

This could be in relation to my energy remaining constant throughout the day

Do I miss those �high� moments from drinking coffee and beer with friends?

Sure, but at least my mood is more stable, which I�m sure is great for my body and

mental health.

3) I�m More Physically Fit (And Ripped)!

I really upped my game at the gym, lifting heavy weights and doing body exercises like

push ups and pull ups.

I also ran about 5 kilometers, twice a day.

The fact that I was taking care of myself with my diet meant that I had more motivation

to be physically fit as well.

As I wasn�t relying on coffee or soda for a quick energy boost, I found that gym workouts

and running gave me a nice energy boost if I needed it.

4) My Sleep Also Improved I�ve always had a problem with sleeping.

Sometimes I go through phases of it being quite good, and other times I�m getting

2-6 hours of sleep a night.

But the past couple of weeks I�ve been sleeping quite well.

I hardly wake during the night, which is rare for me.

I can�t be certain if it�s the diet because mindset plays a huge role in sleep for me.

However, it is a nice correlation.

5) I�m No Longer Sneezing I also found that I wasn�t sneezing as much

as I used to.

For some reason, I regularly have a runny nose, particularly during hay-fever season.

But I haven�t noticed that at all in the past few weeks.

Research has shown that eating too many processed foods can hurt our ability to fight colds

and little bugs because you�re not getting enough nutrition to fuel the immune system.

In Conclusion Now that I look back detoxing has been a pretty

great and challenging experience.

My energy and mental state has improved, I�ve lost weight, my sleep has been good, and I�m

fitter than I�ve been for a while.

So will I continue?

Absolutely!

The one thing I will change is beer.

I won�t have it every night, but I will reserve the right to have a few beers once

or twice a week.

This is just one man�s story, but you can clearly see how just making a few changes

in your diet and lifestyle can provide you with tons of benefits.

You may not realize how good you can feel until you stop relying on substances and stimulants.

What aspects of your diet do you feel may be weighing you down?

Could you try giving them up for a month and seeing how it feels, it�s worth a shot,

right?

Much Love

For more infomation >> WHAT HAPPENED TO THIS MAN WHEN HE GAVE UP SUGAR, DAIRY, GLUTEN & - Duration: 6:44.

-------------------------------------------

ДЕМБЕЛЕ СЫГРАЕТ ПРОТИВ РЕАЛ МАДРИДА?! ► ВОЗВРАЩЕНИЕ ДЕМБЕЛЕ - Duration: 2:19.

For more infomation >> ДЕМБЕЛЕ СЫГРАЕТ ПРОТИВ РЕАЛ МАДРИДА?! ► ВОЗВРАЩЕНИЕ ДЕМБЕЛЕ - Duration: 2:19.

-------------------------------------------

Perfect Beauty Tiny Modern Farmhaus in Dallas Texas - Duration: 4:26.

PERFECT BEAUTY TINY MODERN FARMHAUS IN DALLAS. TEXAS

For more infomation >> Perfect Beauty Tiny Modern Farmhaus in Dallas Texas - Duration: 4:26.

-------------------------------------------

ANTS VS. ALIEN MOLD - Duration: 18:55.

Previously in the Tomb Raider Saga...

Now as the ants were eating, I noticed something strange.

AC Family, look.

Alien mold.

This is very bad news.

Please subscribe to my channel, and hit the bell icon.

Welcome to the AC Family.

Tired of nature channels now sowing nature shows?

Just watch this channel.

Enjoy.

Last week, we watched in excitement as our Golden Empire, our yellow crazy ant colony

received their new home, thanks to your votes, into our new Youtube Gold Play Button.

It was a magical and joyous event for the Golden Empire.

But acquiring a new home has not been so joyous for all our ants, for just nearby, our newly

caught Pharaoh ant colony, you called the Tomb Raiders, had been undergoing a more challenging

transition in their new massive, room-sized home.

By the way, AC Family, if you're excited about this episode and enjoy our ant videos, please

hit that LIKE button and let me know!

So for those of you who might be new to the channel, let's recap real quick and go back

to two weeks ago.

This new Tomb Raider setup composed of various terrariums all connected by tubing was designed

to house our newly captured colony of wild pharaoh ants, whose menacing invasion of another

one of our ant terrariums we successfully intercepted by trapping them and turning the

traps into these neat terrariums.

After this video, feel free to watch the whole story in this series playlist.

The new Tomb Raiders' 35 foot long territories, which span the entire ant room was pretty

impressive and quite promising, until we discovered these creepy growths that began making an

nightmarish appearance, all over the sticks and mosses.

It was some alien mold, and it didn't look good.

So, let's get to it!

Trying my best not panic, we had to look at this critically.

Though the mold looked quite scary, the important question was: Was this mold dangerous to the

colony?

And AC Family, to answer that we needed to look at the facts, and consider two possibilities.

The first posibility was that this was a non-lethal mold.

Most ants, being natural residents of soil, are generally adapted to deal with most molds

and fungi which naturally occur in a terrestrial environment.

In fact, their lifestyle is built to work with molds and keep mold growth regulated.

You see, ants are super clean and sterile animals.

They don't just leave their trash laying around to fester.

Like humans, they establish a designated garbage site to which they carry their trash, and

from there they leave it to natural critters like springtails and molds to further breakdown

the garbage safely.

Some ants have underground chambers which they make their garbage sites and then when

these chambers are full they simply block off the entrances to these garbage rooms with

soil and leave it to the sprintails and molds to break them down.

Ants like humans, also have a designated bathroom area for the same reason, which again creates

an isolated site for molds and other life forms to feed and grow.

They don't just deficate anywhere in the nest.

Even the young are built to to be clean.

They poop just once in their entire larval stage and it is contained in a meconium which

appears a little black dot on cocoons or white dot on naked pupae.

That way, no poop lays around the nursery chambers for molds to get out of control inside

the nest.

Also, as we saw in last week's video, ants transfer their food mouth to mouth through

a process called trophallaxis, and the food is carried inside their bodies.

This way, food is kept sterile and isn't laying around the nest for endangering molds to grow.

Finally, worker ants are constantly licking and cleaning the young and themselves to make

sure mold doesn't grow on them nor the young.

So, in light of all of this, it was assuring to me that perhaps this alien mold was not

a threat to our Tomb Raiders.

The mold after all seemed to be growing on our natural moss and sticks, so perhaps it

was more of a mold specialized on feeding on decaying organic matter and not on living

ants.

Now let's consider our second possibility: that this alien mold is a danger to our Tomb

Raiders.

Two things were of concern to me regarding this.

First, even if this mold was not attacking our ants directly, if left unchecked, and

allowed to completely take over the Tomb Raider's setup, it was possible that the ants would

eventually be unable to clean all this mold's spores from the skin of their brood, which

would lead to all eggs, larvae, and pupae falling vicitim to the mold, and in an advanced

case, proceeding to grow on and kill the worker ants and queens.

The mold would win simply by numbers.

This type of mold takeover would be a nightmare.

It actually happens in the ant keeping hobby within moldy test tubes all the time!

The second concern, was the impending possibility that this fungus was one of several species

of an ant-eating specialized parasitic fungus.

The ever infamous cordyceps fungus turns adult ants into zombies, literally taking over their

brains and causing them to walk to a certain location high up somwhere to become a breeding

bed for their mushrooms which like in a terrifying science fiction horror film, break out of

the zombified ants' bodies to expel spores which go on to zombify other ants nearby.

But to me, this mold being a cordyceps or ant-zombifying mold was the least likely circumstance,

mainly because it seemed to be mostly growing and feeding on the sticks and mosses.

Cordyceps and other such zombifying molds feed mainly on insects and other arthropods.

So what do you guys think?

Do think this mold is a danger to our Tomb Raiders?

Considering all the aforementioned possibilities, I felt our best bet was to stop this unbridled

growth of the alien mold throughout the Tomb Raider's territories.

We needed to act immediately and eradicate it, just to be safe.

So AC Family, here was my plan.

I have found in all my experience in ant keeping that molds have a tendency to show up in moist

areas where the air is still and not moving.

These moist, still air conditions can be a result of an outworld that has poor ventilation.

Now let's have a look at our Tomb Raider's setup here.

Because of the Tomb Raider's tiny worker size of 1-2 mm, some of the workers ants are fully

able of fitting through the microholes in the perforated floors of our Hybrid Nests,

our AC plugs, and our AC Test Tube Portals which I normally use to give ants in ant farms

air.

So when putting together the Tomb Raiders' territories a few weeks ago, I couldn't use

these items to provide ventilation.

Instead, I had to create small specific points of air entry at two locations using a micro

screen mesh.

One at the top of the Garden of Anubis, as well as at the top of the Field of Aaru.

I also knew that anytime I opened one of the terrariums to water or feed the Tomb Raiders,

ample fresh air would enter the setup.

Normally these three points of air flow would be enough air to sustain the colony, but it

seems to have also lead to stagnant, humid air pooling inside the setup which has invited

these creepy-looking molds to flourish.

So, AC Family, our solution to our problem lay in this piece of technology, our new wind

maker, i.e. a fish aquarium air pump.

We needed to create some wind to help save our ants.

You see, if the territories had some wind and increased air movement within the terrariums

of our Tomb Raiders, the territories would become less favourable for these molds.

I have used air pumps in the past to successfully create microwinds in ant setups, and they

have always been quite effective at not only improving ventilation but also at keeping

mold levels down.

The ants however, kind of hate the wind, especially in places they are nesting, but it is necessary

sometimes to get fresh air pumping and moving around in a stuffy, humid ant space.

My plan was to install this air pump tube to this opening in the Valley of the Kings,

where the entire setup starts, which would then pump fresh dry air through the setup,

not enough to cause an ant tempest, but enough to at least create a microwind, and theoretically

keep all this alien mold growth under control.

My guess is once this air pump is installed, the colony which is currently camped out in

Nerfertiti's Tunnel will be bothered and move somewhere else less windy.

We'll just have to see.

Here we go AC Family are you ready?

It's time to give our ants some centralized ventilation.

Removing the cotton and wrapping it around the air pump tube, and placing it into the

hole opening of the Valley of the Kings.

Installed.

Let's watch how our Tomb Raiders react!

The colony is instantly perturbed by the sudden winds.

They can feel it throughout Nerfertini's Tunnel.

Surprisingly, ants spill out into the Valley of the Kings, perhaps because they felt like

an intruder was causing this sudden disturbance, while others exiting Nerfertiti's Tunnel and

moving into the Garden of Anubis.

Overall, just as I thought they would, the ants seemed triggered by this sudden moving

air.

It surely would affect the well-being of the brood, so they had to mobilize quickly.

12 hours later, as expected, the colony had completely deserted Nefertiti's Tunnel to

move camp, and were now nestled in the shadows of the Nubian Shelf.

Sorry Tomb Raiders, it is for your own good.

I put them back in the dark to leave them in peace.

Fast forward to two weeks later having this constant wind blowing through the lands, and

as of a couple days ago, this is what I saw.

The mold was dying and decreasing in size.

Yes, AC Family, our plan had worked!

I was so happy at the outcome!

I felt this was a positive triumph and step towards colony fruition for our Tomb Raiders.

But wanna see something else super interesting?

What surprised me further was this discovery.

It seems our new wind has carried moisture from inside the Valley of the Kings, as well

as from within the Garden of Anubis through the setup, and to the Garden of Alexandria,

where the moisture seems to all be collecting.

The terrarium walls were moist with condensed water.

It seemed the Garden of Alexandria had became a kind of swamp or bog land, which made it

super favourable for some friends to flourish and breed: springtails and even snails!

How cool!

This excited me because it meant that the Garden of Alexandria had become the new breeding

grounds and hub for the reproduction of Springtails and Snails, who naturally clean up our ants'

garbage, organic decaying waste, and molds.

These springtails and snails would then freely migrate to other areas of the Tomb Raiders'

setup, to go on with their beneficial biological work in those areas.

The Garden of Alexandria in other words would be the Tomb Raiders' new janitory dispatch

headquarters, which is super cool, right AC Family?

So it seems this potentially life-threatening alien mold, now under control, has in the

end lead us to improve the living space of our Tomb Raiders by making it a more biologically

balanced system for all inhabitants.

I have discovered based on our past experience particularly with our Golden Empire and even

our Titans that the key to a successful and fruitful ant farm is to establish a balanced,

biological system of organisms, not much more different than establishing a biological balance

in an aquatic fish tank where all living things depend on one another in ideal proportions.

As the ant keeper, we have a very God-like responsibility and role, to make the necessary

critical decisions that ensure the thousands and perhaps millions of lives under our care

are each provided with all the things they need to properly sustain themselves and find

their balance within a contained setup.

Today, AC Family, I feel we did good, and our ants will be ok.

In fact, it seems straggler pharaoh ants from the outside are still trying to find ways

to get into our Tomb Raiders' setup to join the rest of their family, and so I simply

scoop up these interloppers with a cotton ball and throw them inside to reunite.

It was a happy ending for our Titans... or at least so I thought, until a couple nights

ago, as I was filming the Tomb Raiders and their growing piles of brood.

Something about the appearance of the queens and even the workers didn't seem right.

Their bodies seemed somehow bumpy.

So zooming in with my camera, I made a discovery that left me speechless.

I couldn't believe my eyes.

Look, AC Family!

How could this be happening?

I looked around and realized that all of our Tomb Raiders were now dealing with a second

plague.

Mites.

Tonnes and tonnes of parasitic mites.

Oh man!

AC Family, this is just unbelievable.

Now our Tomb Raiders have a mite problem, something our Golden Empire went through at

this time, exactly 1 year ago.

We must think of a solution to help our Tomb Raiders overcome these mites!

AC Inner Colony, I have left a hidden cookie for you here, if you would like to see more

extended play footage of these new parasitic mites threatening our Tomb Raiders.

I am sure a lot of you are as concerned as I am.

And before we proceed to the AC Question of the Week, I have an exciting announcement!

In case you haven't heard yet, our annual Christmas Sale at AntsCanada.com is in full

effect!

This year we have a great sale on our brand new Hybrid Nest 2.0 and our All You Need Formica

Hybrid Nest Gear Pack!

So if you've always wanted to get into ant keeping, I have left links in the description

box to these sale items so you can pick one up for yourself or someone you love this Christmas.

We ship worldwide, but just a reminder, you must order before Dec 18th to get your order

before Christmas so go get it asap!

But if you're not fussy about getting the item before Christmas day, this Christmas

sale as usual will continue until January 1st, 2018 and we also have gift cards in case

you would like to get your special loved one an ant setup but are not sure what they would

want.

Keep ants with me and discover how amazing and mind-stimulating these creatures are in

real life!

Alright, and now it's time for the AC Question of the week!

In last week's video we asked:

Why did we choose to make Golden Rock

a dry setup?

Congratulations to Beatriz Pacheco who correctly answered:

We don't want the setup to absorb moisture and rot.

Congratulations Beatriz, you just won a free ebook Handbook from our shop!

In this week's AC Question of the Week, we ask:

Name one of the several ways in which ants keep mold and fungus

levels low or under control within the nest?

Leave your answer in the comments section and you could win a free ant t-shirt from

our shop!

Hope you can subscribe to the channel as we upload every Saturday at 8AM EST.

Please remember to LIKE, COMMENT, SHARE, & SUBSCRIBE if you enjoyed this video to help us keep

making more.

It's ant love forever!

For more infomation >> ANTS VS. ALIEN MOLD - Duration: 18:55.

-------------------------------------------

Beautiful Athens Park Homes Model 1260 Popular Choice Fast - Duration: 2:23.

Beautiful Athens Park Homes Model 1260 Popular Choice Fast

For more infomation >> Beautiful Athens Park Homes Model 1260 Popular Choice Fast - Duration: 2:23.

-------------------------------------------

What is fracking? - Duration: 1:30.

Smart Learning for All

What is fracking?

A dance form.

Deep inside the earth, there is a layer of shale rocks.

These rocks contain fossil fuels like oil and gas in their pores.

To extract these fuels, a technique called fracking or hydraulic fracturing is used.

In fracking, a vertical well is drilled into the layer of shale rocks.

Then, the drill is turned by 90 degrees and drilling continues horizontally.

When the targeted distance is reached, the fracking well is encased.

Then, a perforating gun is inserted in the well.

When the perforating gun reaches the required distance, the rocks are perforated.

Then the perforating gun is removed and a fracking fluid is pumped in the well.

This fluid builds pressure in the perforations creating cracks in the rocks, thus releasing the fossil fuels.

These fuels and the fracking fluid are then drawn to the surface.

For more educational videos please visit http://www.SmartLearningforAll.com

Also, don't forget to subscribe to our YouTube channel.

For more infomation >> What is fracking? - Duration: 1:30.

-------------------------------------------

Что вытворяет БУСКЕТС за БАРСЕЛОНУ в сезоне 2017/18 - Duration: 6:30.

For more infomation >> Что вытворяет БУСКЕТС за БАРСЕЛОНУ в сезоне 2017/18 - Duration: 6:30.

-------------------------------------------

The Cabin Sweet House | Lovely Tiny House - Duration: 5:11.

For more infomation >> The Cabin Sweet House | Lovely Tiny House - Duration: 5:11.

-------------------------------------------

PRINCE HARRY & MEGHAN MARKLE ROYAL WEDDING PLANS ANNOUNCED on KENSINGTON PALACE's TWITTER Today - Duration: 2:30.

For more infomation >> PRINCE HARRY & MEGHAN MARKLE ROYAL WEDDING PLANS ANNOUNCED on KENSINGTON PALACE's TWITTER Today - Duration: 2:30.

-------------------------------------------

Rapper Cardi B Buys Her Fiance, Offset, A Rolls Royce For His 26th Birthday Today|NVS News - Duration: 1:00.

Rapper Cardi B Buys Her Fiance, Offset, A Rolls Royce For His 26th Birthday Today

Wow!!! Sweet Loving on this end!!! .

The recently proposed to Cardi B got her fiance Offestryn a brand new Rolls Royce for his 26th birthday.

Can't Imagine.

For more infomation >> Rapper Cardi B Buys Her Fiance, Offset, A Rolls Royce For His 26th Birthday Today|NVS News - Duration: 1:00.

-------------------------------------------

Fans Think SNSD Yoona's Gained Some Weight - AMAZING NEWS - Duration: 2:51.

Fans Think SNSD Yoona's Gained Some Weight

Yoona's recent public appearance is gaining a lot of love because of her recent weight gain!.

From her debut, Yoona's been famous for her slim body.

She actually said that she gets stressed that she is too skinny since its hard for her to gain weight.

She revealed several times that she tries to gain weight, unlike many other celebrities who try to lose weight.

However, fans recently spotted Yoona looking much healthier with more fat on her slim figure.

And the fans absolutely loved her new healthy glow!.

Yoona attended the Marianas International Film Festival in Saipan in a gorgeous black dress.

She looked stunning, and fans are guessing that she gained a bit of weight since her last public appearance.

Fans are just happy to see Yoona looking healthier than ever!.

For more infomation >> Fans Think SNSD Yoona's Gained Some Weight - AMAZING NEWS - Duration: 2:51.

-------------------------------------------

ਆਇ ਪਇਆ ਤੇਰੀ ਸਰਣਾਈ | Bhai Harpreet Singh Toronto - Duration: 39:00.

ਮਾਝ ਮਹਲਾ ੫ ॥ Maajh, Fifth Mehl: ਆਉ ਸਾਜਨ ਸੰਤ ਮੀਤ ਪਿਆਰੇ ॥ Come, dear friends, Saints and companions: ਮਿਲਿ ਗਾਵਹ ਗੁਣ ਅਗਮ ਅਪਾਰੇ ॥ Let us join together and sing the Glorious Praises of the Inaccessible and Infinite Lord. ਗਾਵਤ ਸੁਣਤ ਸਭੇ ਹੀ ਮੁਕਤੇ ਸੋ ਧਿਆਈਐ ਜਿਨਿ ਹਮ ਕੀਏ ਜੀਉ ॥੧॥ Those who sing and hear these praises are liberated, so let us meditate on the One who created us. ||1|| ਜਨਮ ਜਨਮ ਕੇ ਕਿਲਬਿਖ ਜਾਵਹਿ ॥ The sins of countless incarnations depart, ਮਨਿ ਚਿੰਦੇ ਸੇਈ ਫਲ ਪਾਵਹਿ ॥ And we receive the fruits of the mind's desires. ਸਿਮਰਿ ਸਾਹਿਬੁ ਸੋ ਸਚੁ ਸੁਆਮੀ ਰਿਜਕੁ ਸਭਸੁ ਕਉ ਦੀਏ ਜੀਉ ॥੨॥ So meditate on that Lord, our True Lord and Master, who gives sustenance to all. ||2|| ਨਾਮੁ ਜਪਤ ਸਰਬ ਸੁਖੁ ਪਾਈਐ ॥ Chanting the Naam, all pleasures are obtained. ਸਭੁ ਭਉ ਬਿਨਸੈ ਹਰਿ ਹਰਿ ਧਿਆਈਐ ॥ All fears are erased, meditating on the Name of the Lord, Har, Har. ਜਿਨਿ ਸੇਵਿਆ ਸੋ ਪਾਰਗਿਰਾਮੀ ਕਾਰਜ ਸਗਲੇ ਥੀਏ ਜੀਉ ॥੩॥ One who serves the Lord swims across to the other side, and all his affairs are resolved. ||3|| ਆਇ ਪਇਆ ਤੇਰੀ ਸਰਣਾਈ ॥ I have come to Your Sanctuary; ਜਿਉ ਭਾਵੈ ਤਿਉ ਲੈਹਿ ਮਿਲਾਈ ॥ If it pleases You, unite me with You.ਕਰਿ ਕਿਰਪਾ ਪ੍ਰਭੁ ਭਗਤੀ ਲਾਵਹੁ ਸਚੁ ਨਾਨਕ ਅੰਮ੍ਰਿਤੁ ਪੀਏ ਜੀਉ ॥੪॥੨੮॥੩੫॥ Shower Your Mercy upon me, God; let me be committed to devotional worship. Nanak drinks in the Ambrosial Nectar of Truth. ||4||28||35||

For more infomation >> ਆਇ ਪਇਆ ਤੇਰੀ ਸਰਣਾਈ | Bhai Harpreet Singh Toronto - Duration: 39:00.

-------------------------------------------

The ER Kit by Dab Design - BMW R nineT custom kit - Duration: 2:55.

For more infomation >> The ER Kit by Dab Design - BMW R nineT custom kit - Duration: 2:55.

-------------------------------------------

Colorado Springs ski shops hope for snow after slow start to season - Duration: 2:05.

For more infomation >> Colorado Springs ski shops hope for snow after slow start to season - Duration: 2:05.

-------------------------------------------

Dolunay / Full Moon - Episode 24 Trailer 2 (Eng & Tur Subs) - Duration: 0:48.

He had made preparations in order to propose to me.

A real proposal.

I am acquainted with some attorneys. We can talk to them and file for your divorce in no time.

- Nazlı, I think I love Tarık. - Huh?

I mean I love him beyond friendship.

- There is a date at the back. - Wow, Engin you are great.

When we are so happy and so in love, what are you afraid of?

Is it that you don't trust me?

No!

Then, what is it Nazlı? Say something.

But don't tell me that you don't love me, Nazlı.

You know what Nazlı, I don't care anymore.

I have got really bored about these mysteries, secrets and the things you cannot tell me.

I thought about this..

... and decided to pay for my crime.

For more infomation >> Dolunay / Full Moon - Episode 24 Trailer 2 (Eng & Tur Subs) - Duration: 0:48.

-------------------------------------------

Siyah İnci / Black Pearl Trailer - Episode 13 (Eng & Tur Subs) - Duration: 0:41.

Hazal.

I don't know how long it's been since I put my heart in your palms but...

...every minute I spent for this love and every second were added to my life.

As you love and look at me this fondly, death got away from me.

But with every minute I spend away from you, with every second, I am getting closer to death.

No comments:

Post a Comment