Friday, November 3, 2017

Youtube daily report Nov 3 2017

Hey guys! It's Evie! I have some clothes here.

They're on the highest quality and they're for sale!

Over here, we have Carlos'... uh, I mean, mens' shoes.

They're on sale, if you wanna buy them, call me.

Next, we have coats and shirts, also for men.

Oh, we also have womens' shoes. They're 50% off.

And women's pieces. I designed some of them myself.

Now, this piece is a limited edition, and it's so expensive.

Yes, it is Carlos' outfit and yes, this is on sale and..

CARLOS: Evie!

Are you selling my clothes?

Yes, Carlos. All, I'll sell your clothes. Because you always leave your clothes on the floor, and you don't wash them.

CARLOS: Uhh, okay. I get 50% on the sales okay. EVIE: Whatever.

So that's all I have for you guys today! Stay tuned for more clothes sale.

Next week, I'm gonna sell Jay's clothes!

JAY: Hey! EVIE: Bye!

For more infomation >> EVIE SELLS CARLOS' CLOTHES! | Descendants SIMS Parody - Duration: 1:30.

-------------------------------------------

10 perros de Instagram que ya deberías seguir - Duration: 8:47.

For more infomation >> 10 perros de Instagram que ya deberías seguir - Duration: 8:47.

-------------------------------------------

London Districts: Hither Green (Tour guide) - Duration: 3:48.

For more infomation >> London Districts: Hither Green (Tour guide) - Duration: 3:48.

-------------------------------------------

TRƯỜNG SƠN 3 | QUÊ HƯƠNG VÀ NGƯỜI TÌNH | NHẠC VÀNG TRƯỚC 75 - Duration: 1:33:31.

For more infomation >> TRƯỜNG SƠN 3 | QUÊ HƯƠNG VÀ NGƯỜI TÌNH | NHẠC VÀNG TRƯỚC 75 - Duration: 1:33:31.

-------------------------------------------

Une actrice de "Grey's anatomy" harcelée sexuellement : le nom du metteur en scène.... - Duration: 2:08.

For more infomation >> Une actrice de "Grey's anatomy" harcelée sexuellement : le nom du metteur en scène.... - Duration: 2:08.

-------------------------------------------

Chronique | UN ANGE A MA TABLE | FilmoTV - Duration: 1:01.

For more infomation >> Chronique | UN ANGE A MA TABLE | FilmoTV - Duration: 1:01.

-------------------------------------------

"Pokotto Colorful Chocolate" Popin' Cookin' by Kracie Japan - BOOWHOWOO How to: DIY Candy #43 - Duration: 5:18.

Hello everyone. I'm BOOWHOWOO

Today

I'm going to make "Pokotto Colorful Chocolate" by Kracie Japan

The cut and colorful piece of chocolates like this

There is

a mold

Colored chocolate

And plain chocolate

Then crunch puff

There are 7 kinds of mold tray

and here is mine for this time

Before making

Cut the tray along the line

OK, here we go!

Tray "A"

Put the colored chocolate

in the mold

as you like

Good smell!

How should I do with th butterfly..?

Done

Next

Sprinkle this crunch puff on top of the colored chocolate

And at last

Place the plain chocolate

They are so tiny

Done

Put it in the microwave oven

and heat it for 10 seconds(When 600W)

Tray "B"

Press the chocolate tightly fitting the pattern

Press, press, and pressing...

Put it in the freezer

for 3 minutes

3 minutes has passed

I wonder how they look like

Take the tray "B"

out

slowly and

Turn over the tray "A"

to remove the chocolates

I did it!

Finished!

Now let's eat right away

From this candy-shaped chocolate...

Yup!

The crispy crunch

and the chocolate

match very well

in the mouth

The colored chocolate

tastes some fruits

About plain chocolate...

tastes plain chocolate :P

Next

A butterfly

Yeah delicious!

It is crispy

This is

my favorite

a flower

Because

I could decorate the way I imagined

Light blue, pink, light blue, pink alternately

And the middle is yellow

I could do just I imagined

The yellow ran over the line...but anyway I love it

Ladybug

I wanted black face

But it is pale blue

Maybe...because it is cold today?

I ate up!

How was the video today?

I hope you like it

Usually DIY candy is made by some colored powder

but this time, I made with real chocolate

That's why

it is better taste

among my DIY candy experiences

It was super easy

And was fun to make my own colorful chocolate

Thank you for watching

See you next video

I will brush my teeth after having this...

No more?

(Mom) It's all gone...

For more infomation >> "Pokotto Colorful Chocolate" Popin' Cookin' by Kracie Japan - BOOWHOWOO How to: DIY Candy #43 - Duration: 5:18.

-------------------------------------------

"치마 입기 두렵다"…여성 다리 노린 침·먹물테러 잇따라 - Duration: 7:19.

For more infomation >> "치마 입기 두렵다"…여성 다리 노린 침·먹물테러 잇따라 - Duration: 7:19.

-------------------------------------------

NATIVO - Duration: 2:23.

Creo que todo empezó con genuina curiosidad.

En los últimos 10 años Panamá

ha tenido mucho crecimiento y desarrollo

en muchas áreas y en muchos campos

pero siento que el área de cultura

siempre ha estado un poco dejada.

Este sentimiento de curiosidad fue lo primero

que me trajo a inicios de este año a Kuna Nega.

Pasar tiempo con ellos

escuchando sus historias, simplemente recorrer sus calles,

me dio bastante perspectiva y me dio también

el sentimiento de que de estas personas y estas historias,

aún hay mucho más que contar y mucho más por hacer.

El Proyecto Nativo está destinado a ser un estudio etnográfico visual

de las 7 comunidades nativas de Panamá.

Lo que deseamos hacer con este proyecto es retratar

la realidad de sus vidas y sus tradiciones,

pero también revelar sus retos y sus logros del día a día.

Últimamente lo que esperamos lograr con esto es

crear las condiciones para un impacto positivo en el futuro

de estas comunidades.

Capturar estas historias no es una tarea fácil

especialmente cuando tratamos de tener un balance entre arte y documentarismo.

Es por esto que estaremos capturando fotos, videos e historias.

Nos queremos permitir suficiente tiempo para realmente envolvernos

en las culturas locales y en las comunidades

es por eso que nos permitimos 2 meses

para recolectar todo el material.

Sentimos que tenemos una gran oportunidad única para recopilar

historias que no han sido contadas de esta manera anteriormente.

Muchas gracias por haber visto este video

esperamos que se sientan tan inspirados como nosotros a cerca de este proyecto.

Estaríamos muy agradecidos si puedes apoyar el proyecto ya sea financieramente

o compartiendo este video en las redes sociales

y estamos emocionados por compartir las fotos y videos

cuando esté todo listo.

For more infomation >> NATIVO - Duration: 2:23.

-------------------------------------------

Calendarios Publicitarios 2018 #2 Calendarios sobremesa Personalizados Mini - Duration: 0:35.

For more infomation >> Calendarios Publicitarios 2018 #2 Calendarios sobremesa Personalizados Mini - Duration: 0:35.

-------------------------------------------

Zebra Attacked by Hyenas

For more infomation >> Zebra Attacked by Hyenas

-------------------------------------------

[MV] MIND U(마인드유 (어쿠루브舊)) _ If(만약에) - Duration: 5:03.

I toss and turn in bed and think about this

Well...if

we didn't break up

If we didn't

We were like a movie

It was so windy when we first met

I couldn't see anyone else

I only saw you

I can't forget you

We broke up in the end

We broke up

We left each other

Your joke about getting married to me

I believed it

(Why did you leave me? I believed it)

We loved each other

We wanted each other

We did

I think I can still see you with a smile

I toss and turn in bed and imagine this

Well...if

we didn't lose our hands then

If we didn't

It was not enough to say I love you

I looked you in the eye and tickled you

If I caught you then

would we still be together now?

We broke up in the end

We broke up

We left each other

Your joke about getting married to me

I believed it

(Why did you leave me? I believed it)

We loved each other

We wanted each other

We did

I think I can still see you with a smile

We broke up in the end

We broke up

We left each other

Your joke about getting married to me

I believed it

(Why did you leave me? I believed it)

We loved each other

We wanted each other

We did

I think I can still see you with a smile

I haven't changed yet

We broke up in the end

We broke up

We left each other

Your joke about getting married to me

I believed it

(Why did you leave me? I believed it)

We loved each other

We wanted each other

We did

I think I can still see you with a smile

I haven't changed yet

For more infomation >> [MV] MIND U(마인드유 (어쿠루브舊)) _ If(만약에) - Duration: 5:03.

-------------------------------------------

"치마 입기 두렵다"…여성 다리 노린 침·먹물테러 잇따라 - Duration: 7:19.

For more infomation >> "치마 입기 두렵다"…여성 다리 노린 침·먹물테러 잇따라 - Duration: 7:19.

-------------------------------------------

SET (official video) Miel // sunny khepar // Humble Music - Duration: 3:46.

subscrib

subscrib

For more infomation >> SET (official video) Miel // sunny khepar // Humble Music - Duration: 3:46.

-------------------------------------------

Los Angeles Hollywood Rudi's NORTH AMERICAN ADVENTURES 10/27/17 Vlog#1234 - Duration: 15:42.

good morning good morning guys I guess it is that time of the day where I have

to leave this truck stop yes indeed I do we have spent enough time in here

already you got to just go to the other side of the truck stop to be able to

leave yeah looks like it's gonna be another sunny sunny day that is for sure

here's trucks up is almost empty now I've never even seen it full last night

I mean I was up pretty late last night they've never even seen it get fold so I

guess this good would be a good spot to park when you need parking late at night

yes but any of us we gotta get out of here this way that guy one school boy I

guess he wants to go on Park yeah so now comes the moment are we gonna go up to

Los Angelos they call it la

that's the moment I've been dreading for the last couple piece but we got to do

it we got to do it it's just how it is and I will look at these palm trees up

here guys how often do you see me videotaping palm

trees not very often we guarantee you that so see we can get out of here yeah

looks like nobody coming right now also let's get out of here before somebody

decides to come right

yo we have about five hours on regular drive time

to go to let la but I guarantee you we're gonna have some traffic so it's

going to take us more than five hours I guarantee you that

it's probably six hours by time we get into our customers so I'm leaving here

about quarter after nine local time so that way I get in their car robably bye

we'll see maybe three o'clock maybe see exactly how bad the traffic

will be but

and depending - if whether or not I make good stop somewhere yet right I will see

if I find anything really interesting

a little bit of time but the later I get in there towards the traffic is going to

be right so don't really want to do that too much you know I don't really want to

waste too much time but at the same time hundred feet take the entrance to the

right on iPods out they don't want me there to order to eat

all right good I'm just gonna go in there anyways I mean I called him

yesterday and they said the earliest they could get me in was four o'clock

and I said I would even like to get an early air or at least go in there and

his part there you know even if they don't load me but it sounds like they

don't have a lot of room so we may not be able to park there too much but I'm

going to go there anyway so be in their way I don't care if they like it or not

go there yep so currently it's about 20 degrees

Celsius which is cinema perfect temperature and all nice and comfortable

but I guarantee you it's gonna be hotter later on

what I appreciate you guys tuning in for another show here on Rudy's North

American adventure yeah that's right

tammer don't well Lee and that's you essentially as excellia right

about 289 miles to go Here I am guys still going down the i-5 we still have

195 miles to go to Los Angeles but my good I would show you guys remember

today we're talking about having fires up here while you can see right here up

to the right all the grass and everything has been burned up to the

left is good but here up to the right I've been seeing that here for a good

while or already and I figured I turned on my cameras and show you guys a little

bit and it is smelling like a little bit of burn but it's not bad right yeah look

at that they got like a horse or something up there statue or something

but and the cab is starting to warm up so

for the most part most part of basically keeping my windows open so

that way I can stay clincher Bowl in here but anyways I just figured I showed

you a little bit look at it make our windows open again

and then be comfortable in there so I'll be back in a minute

all right you guys we have made it up here into only about 87 more miles to go

to our customer pulled into one of these rest areas or whatever you want to call

it you know we're just gonna take a look at all these nice mountains up here we

came from over there as well we got to climb these hills up to here I know

we're over here yeah I had a scale there at the bottom I was the first one I

actually had to go into but it didn't screw with me or whatever they just you

know let me go no problem I'm empty so they even have an empty lay in there so

I just went in the empty lane and no problem at all so now I'm actually just

taking a half an hour break or whatever you know not about tag 23 minutes done

already so there's a few more minutes and we'll be able to get out of here

that's right then we'll go into LA I've been looking at the at the Google map

here let me just show you guys a little bit if I can hopefully this will work

maybe I can show you a little if you guys look I'm open that's not

glaring too much but it is all red up there already so let me just pull in my

address here where I'm supposed to be going and that's how I look

I got 89 miles to go and I don't know if you guys be able to see it there at the

bottom but it says it's gonna take me two hours in 21 minutes to do 89 miles

which should only take about an hour and a half so yeah I'll probably uh

a good hour worth of traffic in there so oh well nothing I can do about it so

that means let's see here it says I should get there almost at 4 o'clock

this afternoon so I better get going so that way I can make my six o'clock

appointment right so let's get out of here guys my clock is almost over so few

more minutes and we'll be out of here so I have to stop here I didn't really show

you guys the way up because I had a bug hit right beside my lens there he

probably saw it on the previous clip already so I pulled in there and clean

the windshield good so we should be able to show you guys here on the road again

so hopefully that's the case anyways already guys I hope you guys can hear me

and we're still in the mountainous air like I told you we cleaned our

windshield now you should be able to see out at a window

let me just go grab my glasses oh look at that there to the right there's

actually a river down there at the bottom hopefully the camera captures it

there's somebody on the river near to looking pretty good I'm starting to go

up hill there saw very good I stay in the left lane up here because that guy I

think you know

almost past them and then

but here we go to speed over that cinnamon

anyways worthless

when I stopped I was looking at all

so yeah it's gonna take us a good while it

looked like it's gonna take us up these two

ours too true they're together

we'll probably get there around 4 o'clock their time so they set gives us

still two hours till our actual appointment time and even if we get

their little right we'll still have an hour an hour

we get there right at least that's the plan

doesn't change but yeah here we are back in the moments again

pretty flatlands there for a good while so I guess now it's time to hit the mom

somebody is going camp

pick up

he's find on the waiter

beautiful beautiful

anyhow we'll make our way

that's for sure here we are and Los Angeles look at the palm trees up here

you guys I have to talk a little bit loud because I got my windows open and

really hopped down here so I'm gonna keep my windows open this time so if you

can hear me I apologize I might they it's too bad I might just put music

I wanted to get a shot of this I'm kind of keeping an eye out for the birdie a

Hollywood sign I haven't seen it anywhere but I'm coming in towards

downtown Hollywood up here so yeah currently on Hollywood Freeway you

yeah we're looking at getting into as we speak I'm really hoping you guys

can hear me oh yeah look at that

to write that downtown Hollywood loss and

keeping an eye on how to see if I can squat the Hollywood sign but so far have

been unsuccessful and locating it anywhere but oh that they got commercial

that they're heard of pixels ooh anyways we're going to go ahead and get

on through here so far traffic is okay going in like you can see it's pretty

bad they're going up like going up we're going in right next I know what I

was hoping for and my GPS I think has found the correct rope to go in there

but a Google map wanted me to go a little different way but I figured I'll

follow my round McNally GPS cause it's at walking keep yeah

and that's exactly what we're doing

twenty three more miles to go and I'll be at my customer but here we go

don't forget some back upstairs so yes I'll let you guys you will pay attention

to what's going on over here guys yay just want to have a look on what it

looks like here in downtown

look at that Porsche here just cut right in front there ain't no problem we'll

let you never leave helos California he's got a special plate - did he cool

anyways according to my GPS we're still forty-four minutes away from getting to

my customer 18 miles to go let's take a look at downtown a little bit yeah it's

time to move a little bit again but who knows for all alone supposed to go south

here on this one 10 we'll be okay getting on there hopefully

we can get to our customer pretty soon yeah I'm getting hot in here you know it

is pretty hot in here that's for sure paying the temperature I think it's a 33

degrees or something like that so it is fairly hot

it's not human you know

that part is good

Don challenge ice Sanda I won ten or whatever it's called there we go

let's make our way through here and then we're supposed to keep left here on this

so his rule 110 that's right that's where I want to be here we go guys we

have made it to Ontario California last night that was yeah we got loaded

they're right around six o'clock we were done and so we took off and as soon as I

took off it started getting dark and ever still have the heavy heavy traffic

so I decided you know why that just focus on the road and I didn't videotape

any of that coming out of there but like I said it was pretty much dark and here

we are at this mass of truck stop I think I'm what I'm gonna do I'm gonna

fly my drone I see some really nice mountains in the background there let's

see if I can capture a little bit of that I know I can't go real high over

here or real far because I'm actually just on the edge of the circle for the

airports around this area so I don't want to get up in too high in the air

and stuff like that so when there's an airport zone close to you or like right

on the edge you don't want to go high right so I just kind of took it easy and

through that a little bit of a spin around here and stuff like that so

hopefully that footage is gonna be useful so you'll see that tomorrow

yeah anyways I'm going to include that in tomorrow's video so we're gonna hang

her up wrap her up and put the video files in the computer and get out of

here start a new day appreciate you guys watching I hope it was a nice adventure

for you guys so we'll see you tomorrow don't forget to hit that subscribe

button down there below leave a comment hit that thumbs up or done whichever one

favors you and don't forget to share the video guys that's how people find out

about my channel right that's supporting my channel if you guys would so thank

you guys and have a blessed day we'll look forward to seeing you on the next

one

For more infomation >> Los Angeles Hollywood Rudi's NORTH AMERICAN ADVENTURES 10/27/17 Vlog#1234 - Duration: 15:42.

-------------------------------------------

"Pokotto Colorful Chocolate" Popin' Cookin' by Kracie Japan - BOOWHOWOO How to: DIY Candy #43 - Duration: 5:18.

Hello everyone. I'm BOOWHOWOO

Today

I'm going to make "Pokotto Colorful Chocolate" by Kracie Japan

The cut and colorful piece of chocolates like this

There is

a mold

Colored chocolate

And plain chocolate

Then crunch puff

There are 7 kinds of mold tray

and here is mine for this time

Before making

Cut the tray along the line

OK, here we go!

Tray "A"

Put the colored chocolate

in the mold

as you like

Good smell!

How should I do with th butterfly..?

Done

Next

Sprinkle this crunch puff on top of the colored chocolate

And at last

Place the plain chocolate

They are so tiny

Done

Put it in the microwave oven

and heat it for 10 seconds(When 600W)

Tray "B"

Press the chocolate tightly fitting the pattern

Press, press, and pressing...

Put it in the freezer

for 3 minutes

3 minutes has passed

I wonder how they look like

Take the tray "B"

out

slowly and

Turn over the tray "A"

to remove the chocolates

I did it!

Finished!

Now let's eat right away

From this candy-shaped chocolate...

Yup!

The crispy crunch

and the chocolate

match very well

in the mouth

The colored chocolate

tastes some fruits

About plain chocolate...

tastes plain chocolate :P

Next

A butterfly

Yeah delicious!

It is crispy

This is

my favorite

a flower

Because

I could decorate the way I imagined

Light blue, pink, light blue, pink alternately

And the middle is yellow

I could do just I imagined

The yellow ran over the line...but anyway I love it

Ladybug

I wanted black face

But it is pale blue

Maybe...because it is cold today?

I ate up!

How was the video today?

I hope you like it

Usually DIY candy is made by some colored powder

but this time, I made with real chocolate

That's why

it is better taste

among my DIY candy experiences

It was super easy

And was fun to make my own colorful chocolate

Thank you for watching

See you next video

I will brush my teeth after having this...

No more?

(Mom) It's all gone...

For more infomation >> "Pokotto Colorful Chocolate" Popin' Cookin' by Kracie Japan - BOOWHOWOO How to: DIY Candy #43 - Duration: 5:18.

-------------------------------------------

【ドラゴンボールゼット 】 栽培マンVs天津飯、ヤムチャ、クリリン、餃子、ピッコロ・ジュニア、孫悟飯 - Duration: 7:59.

For more infomation >> 【ドラゴンボールゼット 】 栽培マンVs天津飯、ヤムチャ、クリリン、餃子、ピッコロ・ジュニア、孫悟飯 - Duration: 7:59.

-------------------------------------------

J.I.D - Hereditary

For more infomation >> J.I.D - Hereditary

-------------------------------------------

I-TYPE 2 - Duration: 0:48.

For more infomation >> I-TYPE 2 - Duration: 0:48.

-------------------------------------------

Citroën C3 1.4I AMBIANCE - Duration: 0:42.

For more infomation >> Citroën C3 1.4I AMBIANCE - Duration: 0:42.

-------------------------------------------

Hyundai Atos Spirit 1.0i SX - Duration: 0:59.

For more infomation >> Hyundai Atos Spirit 1.0i SX - Duration: 0:59.

-------------------------------------------

Toyota Aygo 1.0 12V VVT-i X-play (1STE EIG./Camera/Airco/LMV) - Duration: 0:52.

For more infomation >> Toyota Aygo 1.0 12V VVT-i X-play (1STE EIG./Camera/Airco/LMV) - Duration: 0:52.

-------------------------------------------

Hyundai ix20 1.6I I-MOTION , AIRCO , CR CONTR , MISTL V , - Duration: 0:59.

For more infomation >> Hyundai ix20 1.6I I-MOTION , AIRCO , CR CONTR , MISTL V , - Duration: 0:59.

-------------------------------------------

LEGO Ideas Women of NASA review! set 21312 - Duration: 15:18.

hello everyone this is a look at the Lego ideas set called women of NASA it's

a much cooler set actually once I got my hands on the pieces then I thought it

was gonna be with this set you build three little dioramas or vignettes that

hold up four figures and the biggest question asked here is why is Miss

Catherine Johnson not included in the set especially when she was designed to

be included in the answer is simply a matter of permissions and licensing Lego

was not able to secure the license and permission to include her likeness in

this set the Margaret Hamilton scene is based on a photograph of her which they

have turned into 3d in a way it's not an exact replica of it but I think it makes

for probably the least interesting build although it's not quite as boring as it

appears I mean getting the stack of books is no big deal but I actually like

what they did with the wall and the build for it and this uses prints so

there's a print for her nameplate and a print for the blackboard on the back no

stickers are included in the set whatsoever actually I like how they

attach to the wall back here just again just a nice fairly simple technique and

the vertical brown thing just represents a coat hanger up close the figure has a

squiggly pattern for the textile of her garment which looks like it's a little

bit low in resolution to me a little bit low in detail I wish they had gone with

some finer lines to represent the pattern but the face I think looks great

I really like what they did for the glasses and I think they captured her

smile pretty accurately actually so you think

it kind of captures the character I captures the the real person and they've

also done a nice job with the legs going down to the feet it's just printed

really well the level of production is you know this is fine it's it's

high-quality and does use dual moulded legs it's a good effect and that's

something that should always be done whenever

possible since they have the technology and the technique available and this

does have a second phase still happy and smiling just a little bit more serious

and looks pretty appropriate I think this kind of captures her eyebrows a

little bit better than the front version if you're a little bit let down by the

build here though I do have to point out that there have been much nicer Lego

ideas builds that go with Margaret Hamilton they just happen to come out in

the set the head these two things as software that she developed and or

worked on substantively one way or another went into making these things go

where they were supposed to and bring these little people back safely Nancy

Roman is nicknamed the mother of Hubble and she's depicted here with her baby

the Hubble telescope I'm actually gonna move the figure out of the way for a

moment and show you that close but focus on the build here first which includes a

large printed panel piece that represents the photograph of the cone

nebula was a picture taken in 2002 I don't know the significance of that one

in particular and why they chose it over or something that's a little bit

possibly more popular in in popular culture or something but it is what it

is it's great to get yet another print probably a lot of people will be just

jumping down to the comment section to say that I have built the telescope

wrong or I've posed it wrong but I just built and posed it the way they showed

in the instructions the little stand is on a hinge joint that allows you to turn

this up and down you can also rotate it around if you want to see the back end

of it with the transceiver faces towards Earth but this is supposed to represent

kind of the business end of it that faces out towards space and actually

captures all the images this is essentially the lens cap that comes down

to protect it unfortunately that is not able to close up in tirely but I like

the way that it's depicted here it's really funny that they used a garbage

can but it's a pretty perfect piece there

very perfect piece I haven't gotten a lot of those garbage cans in like gray

out I remember the last set that had one I think that's a fairly rare color these

panels solar panels are a new exclusive print those are one by four tiles that

they've got there and they also use this relatively new piece up here which is an

awesome awesome piece that I look forward to absolutely hoarding they're

so so useful and they've stuck it into a hollow stud there but yeah I just said

incredibly useful piece but altogether for the size of this build I think it

looks great and I think it looks great from every angle just so long as your

brain doesn't get caught up on the fact that this is a trashcan here if you just

look at the shapes then I think it's pretty brilliant I would say I think the

figure of Miss Roman is a really nice one as well I like the necklace I like

the depth that they brought into the torso with just a little bit of grey

shadowing and also the creases you know just has I think an appropriate Lego a

vacation of this outfit and I like what they did with the face - especially with

the extra shaping around the eyes on the underside and also the two-toned glasses

the rims with the sand green and the dark green that's just really nice

detailing just captured a really nice expression here as well there's a little

bit more to see on that face especially with the glasses with that hair removed

but that just seems like a good a good head a good face to have in Lego form

period you know it just would look good on many different custom characters and

probably some other you know real life based figures as well then here's sort

of the de-facto centerpiece of the set with Sally Ride on the right ayran

when she was making waves and headlines she was America's first woman in space

and then May Jemison is on the left she's the first non Caucasian woman ever

to go into space both of them served with the space shuttle program thus

there is a large depiction of a space shuttle system that kind of dominates

though the entire set not to mention this vignette this is a really cool

build that made some nice uses of pieces and makes for a nice display piece

just good uses of the wedge plates especially nice shaping overall I think

this is the first time that I've seen the relatively new one round 1 by 1

plates with bar on side used in white I'll show you those a little bit better

with thee the mounts for the main engines but there is a major problem

with this build here and that's the relative sizing between the shuttle

itself the lander the orbiter / lander and the rest of the system that the main

big old fuel tank assembly is dwarfed and the SRBs are looking pretty tiny so

it's kind of a super deformed

representation that they have come up with here with the shuttle you know

getting most of most of the prominence in this display kind of not realistic in

that way but it still looks pretty cool and you can take the individual

components apart so the SRBs are just attached with Technic pins from

the sides so you can pull those out sometimes pins want to stay behind but

you don't take those off and you put it into its next state they do help to

stabilize the entire build but they're not critical so

just the orbiter Lander with the tanks and then you can just discard the tanks

by just pulling this entire assembly off leaving behind the very nice shuttle

which is definitely highlight to me of the entire set too bad you can't open up

the cargo bay that would have been extra nice but the

proportions here look pretty good especially like how they've attached the

engines back here and down in there are those one by one pieces that I mentioned

they actually allow you to rotate these from side to side ever so slightly you

can also adjust the angles of the engines overall if you want to bit so

you can get that top one facing up that works out well and just yeah just this

is a nice mini model just by itself I mean they could have sold this and maybe

they will at some point in the future sell just a slight revision of this as

its own little you know $3.00 head or something here's a closer look at the

figure for Sally Ride and I think her torso has the best print in the set just

a great level of detail there it has depth but it has fine details and yet it

doesn't look like it's trying to be too realistic at the same time just you know

has a very nice balance I think between capturing some realism means keeping it

in toy form that's very compatible with the looks of modern standard Lego

figures and does have print on the back which i think is equally good there's

not as much to see here but I think that it's appropriate and this is of course

another figure that has a second face so two possible expressions the most

serious one here I think I think this is a reused face I'm sure that I've seen

this both faces for this head before the other ones are actually new but I think

that it works out okay the hairpiece I think is fine not necessarily the very

best match but you know to reality but probably the

closest match that Lego had available in their inventory and then here is made

Jemison who comes with her helmet I'll just take that out of her hand

um Tara Lee it doesn't really get held there very well it's kind of sitting in

place but another really good torso here with a good level of detail lots of

depth in this one for sure lots and lots of puff depth and another just

good-looking figure a very pleasant face again with similar detailing or similar

shaping of the eyes to the Nancy Roman figure at least the the main larger

smiling face version of her and really good detailing on the back here with the

zipper and I like the two different tones of the silver with the brighter

color and also I guess they call it dark pearl grey which is technically the

gunmetal grey but here I think it's really just a couple of colors overlaid

but whatever it is technically I think it just looks really good and she does

have an alternate face which is a slightly more serious expression but I

think still works out well like again the shaping of the eyes works nicely and

I do want to go ahead and put the helmet on just so you can see the slightly more

complete form that looks great to me with the suit that goes together really

really nicely I'm very happy to see that this helmet and visor design that

Legolas used for so many years would work you know still in in a relatively

realistic depiction of character so this is nice so really an enjoyable high

quality set I think it it definitely exceeds my expectations quite

significantly with the figures and the builds alike I

appreciate very much the inclusion of all prints for everything with no

stickers I think that just everything here was done well it depicts

things that are just very positive good for education in general and I think

it's just all good in general however I will address the elephant in the room

that fuels discussion worldwide about things like this

the fact that Lego would obviously never make a set called men of NASA because

there would be riots and that's a problem that's a problem for this set

it's a problem for the potential of that set how people would respond to how the

company would respond I think that segregating the gender is out in in

general is is a bad policy not in terms of politics but just in terms of the

progression of humanity I think there are a plenty of scenarios where a gender

does matter but in science technology engineering and math I think it should

not matter and in an ideal world definitely I think that data would show

unequivocally that the accomplishments and contributions of women have been

under represented and under celebrated in modern society I think that that's

factual not an opinion I personally believe that is wrong and needs to be

fixed but I believe this is not the right way to fix it

you don't combat inequality with more inequality I'd like to see this be Legos

last time separating people out by their gender unnecessarily and I'd like to see

them set a really positive example for kids by showing that people are people

and great contributions of people to the progression of humanity technology and

society should be celebrated unequivocally and without conditions end

of rant anyway thank you for tuning in I hope that I showed you everything you

wanted to see this set and I hope to have a chance to

talk to you in soon because I'm always working on something new catch you later

you

For more infomation >> LEGO Ideas Women of NASA review! set 21312 - Duration: 15:18.

-------------------------------------------

Volvo 850 2.5i 20V,bj.96,grijs metallic,airco,leder,NAP uitdraai met 253139 km.en APK tot 10/2018,jo - Duration: 0:54.

For more infomation >> Volvo 850 2.5i 20V,bj.96,grijs metallic,airco,leder,NAP uitdraai met 253139 km.en APK tot 10/2018,jo - Duration: 0:54.

-------------------------------------------

How to Stop Worrying & Stressing - Duration: 12:47.

For more infomation >> How to Stop Worrying & Stressing - Duration: 12:47.

-------------------------------------------

Coffee Chat with Lisa - Duration: 3:37.

I am not going to lie.

This podcast episode is going

to have so much information in it,

your brain might hurt at the end.

I'm sorry, it's one of the drawbacks I guess

of having me as one of your besties.

So The Holiday Blitz.

Ha ha, you guys this is so awesome.

If you did The Back-to-School Blitz with me

this summer, and we went through

the five-day Facebook Live and you got

a workbook, a different workbook page

to work on each time, the workbook

is already made, so when you go sign up

for The Holiday Blitz, you'll be able

to download this five-page Holiday Blitz printable.

And just like The Back-to-School Facebook Live Blitz

that we did, I didn't necessarily say,

go get your kids' school supplies.

Go take your kids back-to-school shopping.

I really hit all of those things

that you do in back-to-school time

that will set you up for

a very productive September and October.

And I'm doing the same thing

with The Holiday Blitz.

I'm not talking at all about wrapping your gifts,

buying your gifts, as a matter

of fact there's no mention

of gifts whatsoever in this Blitz.

I want to talk more about how much time

we spend decorating our house, cooking,

doing meal planning, and creating experiences

that will be memorable for our family.

So it'll have a different vibe

than some of the other holiday planners

that you see out there.

It will have a very Lisa Woodruff spin to it.

So from November 10th to November 14th,

you will be able to sign up for the next 100 Day Home

Program that starts on January 1st.

Now I'm not going to go into a lot

of detail about this, but there

are a lot of you already on the wait list,

and if you want to make sure you don't miss

the opportunity to join in this five days

that it's open, go ahead and go over

to organize365.com/100-days, and there you'll

be able to join the wait list.

One of the things that I learned in New York,

that publishing houses and editors

absolutely despise hearing,

it is their pet peeve, is when you pitch

a book and say, there's nothing on the market.

My book is so unique and there's nothing on the market.

It just grates like nails on a chalkboard for them.

So to have that come from you guys right away

to say, there's nothing like this on the market,

which is what I also think.

Don't worry, I'm not putting that

in the pitch because that will

turn editors and publishers off.

But I do think that they're really,

this book that I'm writing really

is not in the marketplace right now,

especially the way I'm going to write it.

So there will be an event for non-licensees

for just the Organize 365 audience.

We're still developing what that

is going to look like, but basically

it will be that same weekend, it'll

be Saturday night and Sunday morning.

Saturday night will be a keynote talk

about the state of paper, and also you'll

be able to get books signed and have pictures taken with me.

And then on Sunday what I want

to have on Sunday, I know it's Church day,

but what I want to have on Sunday

is the largest Sunday Basket Workshop.

So everyone will come, you don't necessarily have

to bring all of your paper, but you will still

be able to go through the Sunday Basket Workshop all

as a big group and the licensees who can stay,

by state, I want to divide everybody out by state.

I have these great ideas in my head,

we'll just have to see how many of them I can actually do.

For more infomation >> Coffee Chat with Lisa - Duration: 3:37.

-------------------------------------------

table saw blades-sharpening /ostrzenie pil/затачивание пила/銳化 - Duration: 13:43.

welcome

Today I show you my way for sharpening carbide tipped saw blades.

sometimes I let some specialized company sharpening the blade

... but not every time.Why?

The company what sharpening blades very well is far away from me.... so I must ship the blades... so it takes some time when I get back my saw blades.

the local sharpening blade guys are far from perfect.... so I do it myself.

Why do I have to pay for something I'm not happy with

so I making it myself....

that blade cost me $65$ if I remember correct...

that blade for ripping solid wood with 24 teeth

...was in a special offer in a package with others blades....

that why it was quite cheap..

Five times sharpening cost me about equal what new blade....I guess.

This price is depending on the state or the country for sure... and often even the city ...

but here I know for five times sharpening cost me about equal what new blade...

I make it 3 times myself and the forth time I give it for professional sharpening company.

that kind of blade can be sharpening from 20 to 30 times...

I make 3/4 of all sharpening my saw blades myself...

so on sharpening just one blade I can safe money for 4-5 new blades...

If I even screw up some sharpening.. the professionals make the correction...

there are two reason why I make it myself.

#1 ...I make it good.

#2 ...its economic for me.

I am good in that because I am talented and I making this over 30 years...

I grew up in communist country and sharpening machinery had only Communist state factories

... and you know asking them for sharpening saw blades cost you so much time.... money for bribes and vodka...

so most woodworkers at that time did it free hand, like me..

My mentor did it also free hand and had teach me.

He had diamond grinding wheel for sharpening carbide tipped blades.

I bought some stuff...

Its seems to be a specialized precision tool for sharpening the saw...

It quickly turned out that is made in China piece of sh... t

so.... I had to modify it for useful stuff..

I show you what it is...

most important .. good lamp

you must see very well what you doing...

.... use eyes protection and dust mask..

I will not speak of the dust mask....

must mark where you start...

I wear a mask and glasses and go ...

That pieces of oak wood I screwed to the base..

The height of the wooden blocks cause the blade is on the middle of the diamond weal.

there was stuff for precise adjusting ....but doesn't work..

...so I removed it ...

... so I made it and works for me well.

My mentor was using similar diamond grinding weal and little top table saw with wooden blocks ...But the principle of action was the same...

That is my way for sharpening my tipped carbide blades for all kind of saw.

If is more teeth on the blade the the sharpening time is much longer...

always use good quality mask and eyes protection.

carbide and diamond dust is dangerous !

that my adjustable lamp....

you can see the dust.You must clean it up.

I touch the blade and I know the blade is sharp or dull

I hope can use this knowledge.

I know the first couple times can be far from perfect...

but... practice will make you perfect...

Do not make the tools extreme dull...

There is better and easier to sharpening blade when is not extremely dull...

especially when you make it free hand

so I do not dull extremely my blades ...

That is much easier to sharpening them.

so do not dull extremely your blades

If you like it hit the button like. Feel free to subscribe...

Let he power be with you !

For more infomation >> table saw blades-sharpening /ostrzenie pil/затачивание пила/銳化 - Duration: 13:43.

-------------------------------------------

Los Angeles Hollywood Rudi's NORTH AMERICAN ADVENTURES 10/27/17 Vlog#1234 - Duration: 15:42.

good morning good morning guys I guess it is that time of the day where I have

to leave this truck stop yes indeed I do we have spent enough time in here

already you got to just go to the other side of the truck stop to be able to

leave yeah looks like it's gonna be another sunny sunny day that is for sure

here's trucks up is almost empty now I've never even seen it full last night

I mean I was up pretty late last night they've never even seen it get fold so I

guess this good would be a good spot to park when you need parking late at night

yes but any of us we gotta get out of here this way that guy one school boy I

guess he wants to go on Park yeah so now comes the moment are we gonna go up to

Los Angelos they call it la

that's the moment I've been dreading for the last couple piece but we got to do

it we got to do it it's just how it is and I will look at these palm trees up

here guys how often do you see me videotaping palm

trees not very often we guarantee you that so see we can get out of here yeah

looks like nobody coming right now also let's get out of here before somebody

decides to come right

yo we have about five hours on regular drive time

to go to let la but I guarantee you we're gonna have some traffic so it's

going to take us more than five hours I guarantee you that

it's probably six hours by time we get into our customers so I'm leaving here

about quarter after nine local time so that way I get in their car robably bye

we'll see maybe three o'clock maybe see exactly how bad the traffic

will be but

and depending - if whether or not I make good stop somewhere yet right I will see

if I find anything really interesting

a little bit of time but the later I get in there towards the traffic is going to

be right so don't really want to do that too much you know I don't really want to

waste too much time but at the same time hundred feet take the entrance to the

right on iPods out they don't want me there to order to eat

all right good I'm just gonna go in there anyways I mean I called him

yesterday and they said the earliest they could get me in was four o'clock

and I said I would even like to get an early air or at least go in there and

his part there you know even if they don't load me but it sounds like they

don't have a lot of room so we may not be able to park there too much but I'm

going to go there anyway so be in their way I don't care if they like it or not

go there yep so currently it's about 20 degrees

Celsius which is cinema perfect temperature and all nice and comfortable

but I guarantee you it's gonna be hotter later on

what I appreciate you guys tuning in for another show here on Rudy's North

American adventure yeah that's right

tammer don't well Lee and that's you essentially as excellia right

about 289 miles to go Here I am guys still going down the i-5 we still have

195 miles to go to Los Angeles but my good I would show you guys remember

today we're talking about having fires up here while you can see right here up

to the right all the grass and everything has been burned up to the

left is good but here up to the right I've been seeing that here for a good

while or already and I figured I turned on my cameras and show you guys a little

bit and it is smelling like a little bit of burn but it's not bad right yeah look

at that they got like a horse or something up there statue or something

but and the cab is starting to warm up so

for the most part most part of basically keeping my windows open so

that way I can stay clincher Bowl in here but anyways I just figured I showed

you a little bit look at it make our windows open again

and then be comfortable in there so I'll be back in a minute

all right you guys we have made it up here into only about 87 more miles to go

to our customer pulled into one of these rest areas or whatever you want to call

it you know we're just gonna take a look at all these nice mountains up here we

came from over there as well we got to climb these hills up to here I know

we're over here yeah I had a scale there at the bottom I was the first one I

actually had to go into but it didn't screw with me or whatever they just you

know let me go no problem I'm empty so they even have an empty lay in there so

I just went in the empty lane and no problem at all so now I'm actually just

taking a half an hour break or whatever you know not about tag 23 minutes done

already so there's a few more minutes and we'll be able to get out of here

that's right then we'll go into LA I've been looking at the at the Google map

here let me just show you guys a little bit if I can hopefully this will work

maybe I can show you a little if you guys look I'm open that's not

glaring too much but it is all red up there already so let me just pull in my

address here where I'm supposed to be going and that's how I look

I got 89 miles to go and I don't know if you guys be able to see it there at the

bottom but it says it's gonna take me two hours in 21 minutes to do 89 miles

which should only take about an hour and a half so yeah I'll probably uh

a good hour worth of traffic in there so oh well nothing I can do about it so

that means let's see here it says I should get there almost at 4 o'clock

this afternoon so I better get going so that way I can make my six o'clock

appointment right so let's get out of here guys my clock is almost over so few

more minutes and we'll be out of here so I have to stop here I didn't really show

you guys the way up because I had a bug hit right beside my lens there he

probably saw it on the previous clip already so I pulled in there and clean

the windshield good so we should be able to show you guys here on the road again

so hopefully that's the case anyways already guys I hope you guys can hear me

and we're still in the mountainous air like I told you we cleaned our

windshield now you should be able to see out at a window

let me just go grab my glasses oh look at that there to the right there's

actually a river down there at the bottom hopefully the camera captures it

there's somebody on the river near to looking pretty good I'm starting to go

up hill there saw very good I stay in the left lane up here because that guy I

think you know

almost past them and then

but here we go to speed over that cinnamon

anyways worthless

when I stopped I was looking at all

so yeah it's gonna take us a good while it

looked like it's gonna take us up these two

ours too true they're together

we'll probably get there around 4 o'clock their time so they set gives us

still two hours till our actual appointment time and even if we get

their little right we'll still have an hour an hour

we get there right at least that's the plan

doesn't change but yeah here we are back in the moments again

pretty flatlands there for a good while so I guess now it's time to hit the mom

somebody is going camp

pick up

he's find on the waiter

beautiful beautiful

anyhow we'll make our way

that's for sure here we are and Los Angeles look at the palm trees up here

you guys I have to talk a little bit loud because I got my windows open and

really hopped down here so I'm gonna keep my windows open this time so if you

can hear me I apologize I might they it's too bad I might just put music

I wanted to get a shot of this I'm kind of keeping an eye out for the birdie a

Hollywood sign I haven't seen it anywhere but I'm coming in towards

downtown Hollywood up here so yeah currently on Hollywood Freeway you

yeah we're looking at getting into as we speak I'm really hoping you guys

can hear me oh yeah look at that

to write that downtown Hollywood loss and

keeping an eye on how to see if I can squat the Hollywood sign but so far have

been unsuccessful and locating it anywhere but oh that they got commercial

that they're heard of pixels ooh anyways we're going to go ahead and get

on through here so far traffic is okay going in like you can see it's pretty

bad they're going up like going up we're going in right next I know what I

was hoping for and my GPS I think has found the correct rope to go in there

but a Google map wanted me to go a little different way but I figured I'll

follow my round McNally GPS cause it's at walking keep yeah

and that's exactly what we're doing

twenty three more miles to go and I'll be at my customer but here we go

don't forget some back upstairs so yes I'll let you guys you will pay attention

to what's going on over here guys yay just want to have a look on what it

looks like here in downtown

look at that Porsche here just cut right in front there ain't no problem we'll

let you never leave helos California he's got a special plate - did he cool

anyways according to my GPS we're still forty-four minutes away from getting to

my customer 18 miles to go let's take a look at downtown a little bit yeah it's

time to move a little bit again but who knows for all alone supposed to go south

here on this one 10 we'll be okay getting on there hopefully

we can get to our customer pretty soon yeah I'm getting hot in here you know it

is pretty hot in here that's for sure paying the temperature I think it's a 33

degrees or something like that so it is fairly hot

it's not human you know

that part is good

Don challenge ice Sanda I won ten or whatever it's called there we go

let's make our way through here and then we're supposed to keep left here on this

so his rule 110 that's right that's where I want to be here we go guys we

have made it to Ontario California last night that was yeah we got loaded

they're right around six o'clock we were done and so we took off and as soon as I

took off it started getting dark and ever still have the heavy heavy traffic

so I decided you know why that just focus on the road and I didn't videotape

any of that coming out of there but like I said it was pretty much dark and here

we are at this mass of truck stop I think I'm what I'm gonna do I'm gonna

fly my drone I see some really nice mountains in the background there let's

see if I can capture a little bit of that I know I can't go real high over

here or real far because I'm actually just on the edge of the circle for the

airports around this area so I don't want to get up in too high in the air

and stuff like that so when there's an airport zone close to you or like right

on the edge you don't want to go high right so I just kind of took it easy and

through that a little bit of a spin around here and stuff like that so

hopefully that footage is gonna be useful so you'll see that tomorrow

yeah anyways I'm going to include that in tomorrow's video so we're gonna hang

her up wrap her up and put the video files in the computer and get out of

here start a new day appreciate you guys watching I hope it was a nice adventure

for you guys so we'll see you tomorrow don't forget to hit that subscribe

button down there below leave a comment hit that thumbs up or done whichever one

favors you and don't forget to share the video guys that's how people find out

about my channel right that's supporting my channel if you guys would so thank

you guys and have a blessed day we'll look forward to seeing you on the next

one

For more infomation >> Los Angeles Hollywood Rudi's NORTH AMERICAN ADVENTURES 10/27/17 Vlog#1234 - Duration: 15:42.

-------------------------------------------

"치마 입기 두렵다"…여성 다리 노린 침·먹물테러 잇따라 - Duration: 7:19.

For more infomation >> "치마 입기 두렵다"…여성 다리 노린 침·먹물테러 잇따라 - Duration: 7:19.

-------------------------------------------

Justin Bieber et Selena Gomez plus proches que jamais, ils se retrouvent pour... - Duration: 2:40.

For more infomation >> Justin Bieber et Selena Gomez plus proches que jamais, ils se retrouvent pour... - Duration: 2:40.

-------------------------------------------

Laser Engraving Machine CNC - EleksMaker EleksLaser A3 Pro 2500mW - Duration: 10:35.

Hi. This is Krzysztof. Carpenter's shop from scratch

In today's episode I'd like to show you a device -

EleksMaker A3 Pro.

EleksMaker is a laser engraving machine

that is controlled from the computer.

It can be purchased in Banggood website. I give the link in the description.

The device itself came to me

directly from the customs.

It was taken to pieces and

packed in the cardboard box.

It you wonder,

putting the device together doesn't make any problem.

I didn't without the manual.

In fact, I relied on the photos available in the website,

what does the assembled device look like

and the instructional film

of similar device.

But after putting the device together

the difficulties with the software cropped up.

The device can be controlled with the use of

several programs.

I'm currently using Benbox.

I managed to set up the device using the Benbox software.

I have to tell you that

it isn't the most user friendly program,

but it is sufficient to operate the machine

and use it in a nice manner.

After assembling the device and setting it up,

in fact the operation doesn't require

any engagement.

<the continuation of the translation will be published soon>

For more infomation >> Laser Engraving Machine CNC - EleksMaker EleksLaser A3 Pro 2500mW - Duration: 10:35.

-------------------------------------------

이선정 황지만 전남편 이혼사유 글래머 맘보걸. 뉴스공장 - Duration: 4:10.

For more infomation >> 이선정 황지만 전남편 이혼사유 글래머 맘보걸. 뉴스공장 - Duration: 4:10.

-------------------------------------------

we swam with SHARKS with NO CAGE!!!! - Duration: 10:07.

NO NO NO, We will die.

We will die for sure!

Why did we choose to do this?!

This is insane!!

We will die for sure.

Good morning , My Mate Nate Family!!!

Today is....!!!

I don't really know what to say

It's so scary

Today...

I will teach you some Thai

Swimming

With

Sharks

If this is your first time watching my video

I'm My Mate Nate

And if you haven't follow or subscribe me

Don't forget to do it!!!

And... Sam also has his own Channel

So, don't forget to follow him as well

Sam Withers

I will leave the link in the description,

I will teach you...

To swim

(Same sound as Greeting in Thailand)

So now you know how to swim...

Yeah... He didn't get that

Forget about it.

So, Yeah. We are here in Australia for traveling

And today is...

Today is the 3rd day

If you haven't watch

The first or second one

You must check it out!

Because

We went around Melbourne

and we

get to

ride the helicopter

Today is the 3rd adventure!

And we are going to swim with the sharks

I'm so...

Sooooo scared

We will swim with the sharks,

which mean we will go scuba diving with them

I have been scuba diving before

I'm fine with the scuba and stuff

But...

the animals that we are going to swim with...

I'm too scared

There are

15 kind of sharks

So, I think in total there will be 25 sharks

in the cage that we will go and swim with them

25 sharks

The biggest shark is...

around 3 meters

It's longer than me!

The biggest one's name is

Mitchell

We studied and looked this up on the internet

Because I don't want to die.

Beside sharks

There are tons of other kind too

There are

Sting Ray

What does Sting Ray means...

Sting Ray means

(Thai translation of Sting Ray)

I'm not sure if that is correct or not

It's wings

It's width is around 3 meters!!!

We will swim with the Sting Ray

That is the guy who killed Steve!!!

Do you remember that?

He was killed by this fish's tail

He got stabbed to his heart

and we are going to swim with it...

I am really scared right now.

I flew all the way here, to Australia.

We gotta do it!

I'm scared... but we have to do it.

Please help us and cheer us

please...

Before we start today

I need you power!

Scroll down and hit that Like button!

We will set a new goal to...

75,000 Likes

Can we get this?

75,000 Likes

I'm too scared to swim with the sharks now.

I really need you guys to cheer me up

30 Minutes Later

We just got here!

We are ready!

We are ready to swim with the sharks!

I'm so scared

I've never thought about swimming with sharks before

Now, We are here

But we will walk around and look around this place first

We can see sharks from here!

We will be swimming with them in 15 minutes

But we just want to check it out before swimming with them

We will swim with that

This is it! We are going to swim with this shark!

We will have to swim with this shark!

Look at this shark!

Ah....

I don't know if this is a good idea

to come down here first

Or is it a really bad idea!

We can see sharks from here, look here

We saw its teeth

It's so sharp!

Here here

Just look at it...

Look, we only have 5 more minutes and then we have to go up there

Its almost our time to do it!

Insane

This is...

Only once in a lifetime and I don't want to miss it

It's so scary but...

if it's that dangerous, they won't let us do it for sure

Look up there!

That is the big one

And this is Sam

Sam, this is the shark that we are going to swim with!

That is just a medium size, not the biggest one

Now we need to receive the training first

Then, we will be swimming with them!

Now we are down here

at this very special place

This is where...

This is where they feed the sharks.

The reason we don't get bite or eaten by them is

because...

They feed them tons of food before we get into the water

So, The sharks are full

They were not hungry

That's why they don't bite

That's it!!!

Now we need to get the training

30 Minutes later

We finished the training

We got this suit

and we are going to change it

We are ready!

Here is the back

It looks so cool

Let's change!

We are ready for it!

Are you ready?

Today, we will swim with the sharks

If you like this video

Cheer us up by Hit that Like button!!

HIT IT!!!

I will never believe this

But yeah...

Live you life!

Don't forget to hit Like!

End

I forgot to turn on the microphone...again

But!

When I get home, I will tell you more about this

You can watch that video at Twitch - My Mate Nate

Here is our food

we have to eat it

And we will finish this up

So, if you love these kind of videos

that we do some crazy and fun stuff

Don't forget to follow us on Twitch- My Mate Nate

Facebook

Instagram

and Youtube

and also Sam's Youtube Channel

I will leave the link in the description

And...

Let's eat!

Look

For more infomation >> we swam with SHARKS with NO CAGE!!!! - Duration: 10:07.

-------------------------------------------

Nightcore - 追光者 ( 岑寧兒 Yoyo Shame) - Duration: 3:50.

For more infomation >> Nightcore - 追光者 ( 岑寧兒 Yoyo Shame) - Duration: 3:50.

-------------------------------------------

[ENG SUB] [ SMART TV - Ch.BTS 11 ] 패션TV || Fashion TV - Duration: 0:26.

SMART TV - CH BTS

Fashion TV

RM: Stylish SMART Uniform statute

RM: Its no bother. I'll show you~

RM: Backpack

RM: Glasses

RM: What do you think? ..No?

//namjoon u cute intellectual, you//

For more infomation >> [ENG SUB] [ SMART TV - Ch.BTS 11 ] 패션TV || Fashion TV - Duration: 0:26.

-------------------------------------------

【In Taiwan】 Shopping In Ximending!! That's Like In Japan! 8 Items [Tapioca..Etc] 3500kcal [Use CC] - Duration: 4:24.

(sorry peeps bad audio gives the translator ~Aphexx~ a migrane therefore subtitles will suffer on this video)

Hello its Kinoshita Yuka today we're here at Ximending

its like the shibuya of taiwan I'll be eating all sorts of yummy things here

famous tapioca shop

I love tapioca drinks can't wait

tapioca milk tea

lots of pearls inside

chewy and yummy and sweet

they're deep frying it

freshly made

so hot and steamy

so big

crispy and juicy meat

the chicken is so juicy

the breading is so tasty

fast

the noodles are here so hot

noodles are so yummy/gooey and its got offal meat in it

yum

lu rou fan topped with a sunny side egg

only ever seen them topped with boiled eggs

yummy

the sauce made of soy sauce is so tasty

specializing in duck

duck bowl

vermicelli

tasty

so meaty tasting

boiled duck

so nicely flavored

last is mango shaved ice

lots of big chunks of mango

melts in your mouth

fluffy

sweet and filled with juicy bits of fruit

so nice to be able to enjoy all this in one area everyone please come as well

For more infomation >> 【In Taiwan】 Shopping In Ximending!! That's Like In Japan! 8 Items [Tapioca..Etc] 3500kcal [Use CC] - Duration: 4:24.

-------------------------------------------

My Edited Video - Duration: 0:16.

For more infomation >> My Edited Video - Duration: 0:16.

-------------------------------------------

How I Make Money Online

For more infomation >> How I Make Money Online

-------------------------------------------

Rosie O'Donnell Tells the Origin Story of Her Feud with Donald Trump - Duration: 5:28.

For more infomation >> Rosie O'Donnell Tells the Origin Story of Her Feud with Donald Trump - Duration: 5:28.

-------------------------------------------

Laser Engraving Machine CNC - EleksMaker EleksLaser A3 Pro 2500mW - Duration: 10:35.

Hi. This is Krzysztof. Carpenter's shop from scratch

In today's episode I'd like to show you a device -

EleksMaker A3 Pro.

EleksMaker is a laser engraving machine

that is controlled from the computer.

It can be purchased in Banggood website. I give the link in the description.

The device itself came to me

directly from the customs.

It was taken to pieces and

packed in the cardboard box.

It you wonder,

putting the device together doesn't make any problem.

I didn't without the manual.

In fact, I relied on the photos available in the website,

what does the assembled device look like

and the instructional film

of similar device.

But after putting the device together

the difficulties with the software cropped up.

The device can be controlled with the use of

several programs.

I'm currently using Benbox.

I managed to set up the device using the Benbox software.

I have to tell you that

it isn't the most user friendly program,

but it is sufficient to operate the machine

and use it in a nice manner.

After assembling the device and setting it up,

in fact the operation doesn't require

any engagement.

<the continuation of the translation will be published soon>

For more infomation >> Laser Engraving Machine CNC - EleksMaker EleksLaser A3 Pro 2500mW - Duration: 10:35.

-------------------------------------------

Jogazera na #BGS10 - Entrevista com Andy Salisbury (Shadow of War) - Duration: 9:40.

For more infomation >> Jogazera na #BGS10 - Entrevista com Andy Salisbury (Shadow of War) - Duration: 9:40.

-------------------------------------------

LEGO Ideas Women of NASA review! set 21312 - Duration: 15:18.

hello everyone this is a look at the Lego ideas set called women of NASA it's

a much cooler set actually once I got my hands on the pieces then I thought it

was gonna be with this set you build three little dioramas or vignettes that

hold up four figures and the biggest question asked here is why is Miss

Catherine Johnson not included in the set especially when she was designed to

be included in the answer is simply a matter of permissions and licensing Lego

was not able to secure the license and permission to include her likeness in

this set the Margaret Hamilton scene is based on a photograph of her which they

have turned into 3d in a way it's not an exact replica of it but I think it makes

for probably the least interesting build although it's not quite as boring as it

appears I mean getting the stack of books is no big deal but I actually like

what they did with the wall and the build for it and this uses prints so

there's a print for her nameplate and a print for the blackboard on the back no

stickers are included in the set whatsoever actually I like how they

attach to the wall back here just again just a nice fairly simple technique and

the vertical brown thing just represents a coat hanger up close the figure has a

squiggly pattern for the textile of her garment which looks like it's a little

bit low in resolution to me a little bit low in detail I wish they had gone with

some finer lines to represent the pattern but the face I think looks great

I really like what they did for the glasses and I think they captured her

smile pretty accurately actually so you think

it kind of captures the character I captures the the real person and they've

also done a nice job with the legs going down to the feet it's just printed

really well the level of production is you know this is fine it's it's

high-quality and does use dual moulded legs it's a good effect and that's

something that should always be done whenever

possible since they have the technology and the technique available and this

does have a second phase still happy and smiling just a little bit more serious

and looks pretty appropriate I think this kind of captures her eyebrows a

little bit better than the front version if you're a little bit let down by the

build here though I do have to point out that there have been much nicer Lego

ideas builds that go with Margaret Hamilton they just happen to come out in

the set the head these two things as software that she developed and or

worked on substantively one way or another went into making these things go

where they were supposed to and bring these little people back safely Nancy

Roman is nicknamed the mother of Hubble and she's depicted here with her baby

the Hubble telescope I'm actually gonna move the figure out of the way for a

moment and show you that close but focus on the build here first which includes a

large printed panel piece that represents the photograph of the cone

nebula was a picture taken in 2002 I don't know the significance of that one

in particular and why they chose it over or something that's a little bit

possibly more popular in in popular culture or something but it is what it

is it's great to get yet another print probably a lot of people will be just

jumping down to the comment section to say that I have built the telescope

wrong or I've posed it wrong but I just built and posed it the way they showed

in the instructions the little stand is on a hinge joint that allows you to turn

this up and down you can also rotate it around if you want to see the back end

of it with the transceiver faces towards Earth but this is supposed to represent

kind of the business end of it that faces out towards space and actually

captures all the images this is essentially the lens cap that comes down

to protect it unfortunately that is not able to close up in tirely but I like

the way that it's depicted here it's really funny that they used a garbage

can but it's a pretty perfect piece there

very perfect piece I haven't gotten a lot of those garbage cans in like gray

out I remember the last set that had one I think that's a fairly rare color these

panels solar panels are a new exclusive print those are one by four tiles that

they've got there and they also use this relatively new piece up here which is an

awesome awesome piece that I look forward to absolutely hoarding they're

so so useful and they've stuck it into a hollow stud there but yeah I just said

incredibly useful piece but altogether for the size of this build I think it

looks great and I think it looks great from every angle just so long as your

brain doesn't get caught up on the fact that this is a trashcan here if you just

look at the shapes then I think it's pretty brilliant I would say I think the

figure of Miss Roman is a really nice one as well I like the necklace I like

the depth that they brought into the torso with just a little bit of grey

shadowing and also the creases you know just has I think an appropriate Lego a

vacation of this outfit and I like what they did with the face - especially with

the extra shaping around the eyes on the underside and also the two-toned glasses

the rims with the sand green and the dark green that's just really nice

detailing just captured a really nice expression here as well there's a little

bit more to see on that face especially with the glasses with that hair removed

but that just seems like a good a good head a good face to have in Lego form

period you know it just would look good on many different custom characters and

probably some other you know real life based figures as well then here's sort

of the de-facto centerpiece of the set with Sally Ride on the right ayran

when she was making waves and headlines she was America's first woman in space

and then May Jemison is on the left she's the first non Caucasian woman ever

to go into space both of them served with the space shuttle program thus

there is a large depiction of a space shuttle system that kind of dominates

though the entire set not to mention this vignette this is a really cool

build that made some nice uses of pieces and makes for a nice display piece

just good uses of the wedge plates especially nice shaping overall I think

this is the first time that I've seen the relatively new one round 1 by 1

plates with bar on side used in white I'll show you those a little bit better

with thee the mounts for the main engines but there is a major problem

with this build here and that's the relative sizing between the shuttle

itself the lander the orbiter / lander and the rest of the system that the main

big old fuel tank assembly is dwarfed and the SRBs are looking pretty tiny so

it's kind of a super deformed

representation that they have come up with here with the shuttle you know

getting most of most of the prominence in this display kind of not realistic in

that way but it still looks pretty cool and you can take the individual

components apart so the SRBs are just attached with Technic pins from

the sides so you can pull those out sometimes pins want to stay behind but

you don't take those off and you put it into its next state they do help to

stabilize the entire build but they're not critical so

just the orbiter Lander with the tanks and then you can just discard the tanks

by just pulling this entire assembly off leaving behind the very nice shuttle

which is definitely highlight to me of the entire set too bad you can't open up

the cargo bay that would have been extra nice but the

proportions here look pretty good especially like how they've attached the

engines back here and down in there are those one by one pieces that I mentioned

they actually allow you to rotate these from side to side ever so slightly you

can also adjust the angles of the engines overall if you want to bit so

you can get that top one facing up that works out well and just yeah just this

is a nice mini model just by itself I mean they could have sold this and maybe

they will at some point in the future sell just a slight revision of this as

its own little you know $3.00 head or something here's a closer look at the

figure for Sally Ride and I think her torso has the best print in the set just

a great level of detail there it has depth but it has fine details and yet it

doesn't look like it's trying to be too realistic at the same time just you know

has a very nice balance I think between capturing some realism means keeping it

in toy form that's very compatible with the looks of modern standard Lego

figures and does have print on the back which i think is equally good there's

not as much to see here but I think that it's appropriate and this is of course

another figure that has a second face so two possible expressions the most

serious one here I think I think this is a reused face I'm sure that I've seen

this both faces for this head before the other ones are actually new but I think

that it works out okay the hairpiece I think is fine not necessarily the very

best match but you know to reality but probably the

closest match that Lego had available in their inventory and then here is made

Jemison who comes with her helmet I'll just take that out of her hand

um Tara Lee it doesn't really get held there very well it's kind of sitting in

place but another really good torso here with a good level of detail lots of

depth in this one for sure lots and lots of puff depth and another just

good-looking figure a very pleasant face again with similar detailing or similar

shaping of the eyes to the Nancy Roman figure at least the the main larger

smiling face version of her and really good detailing on the back here with the

zipper and I like the two different tones of the silver with the brighter

color and also I guess they call it dark pearl grey which is technically the

gunmetal grey but here I think it's really just a couple of colors overlaid

but whatever it is technically I think it just looks really good and she does

have an alternate face which is a slightly more serious expression but I

think still works out well like again the shaping of the eyes works nicely and

I do want to go ahead and put the helmet on just so you can see the slightly more

complete form that looks great to me with the suit that goes together really

really nicely I'm very happy to see that this helmet and visor design that

Legolas used for so many years would work you know still in in a relatively

realistic depiction of character so this is nice so really an enjoyable high

quality set I think it it definitely exceeds my expectations quite

significantly with the figures and the builds alike I

appreciate very much the inclusion of all prints for everything with no

stickers I think that just everything here was done well it depicts

things that are just very positive good for education in general and I think

it's just all good in general however I will address the elephant in the room

that fuels discussion worldwide about things like this

the fact that Lego would obviously never make a set called men of NASA because

there would be riots and that's a problem that's a problem for this set

it's a problem for the potential of that set how people would respond to how the

company would respond I think that segregating the gender is out in in

general is is a bad policy not in terms of politics but just in terms of the

progression of humanity I think there are a plenty of scenarios where a gender

does matter but in science technology engineering and math I think it should

not matter and in an ideal world definitely I think that data would show

unequivocally that the accomplishments and contributions of women have been

under represented and under celebrated in modern society I think that that's

factual not an opinion I personally believe that is wrong and needs to be

fixed but I believe this is not the right way to fix it

you don't combat inequality with more inequality I'd like to see this be Legos

last time separating people out by their gender unnecessarily and I'd like to see

them set a really positive example for kids by showing that people are people

and great contributions of people to the progression of humanity technology and

society should be celebrated unequivocally and without conditions end

of rant anyway thank you for tuning in I hope that I showed you everything you

wanted to see this set and I hope to have a chance to

talk to you in soon because I'm always working on something new catch you later

you

For more infomation >> LEGO Ideas Women of NASA review! set 21312 - Duration: 15:18.

-------------------------------------------

【In Taiwan】 Shopping In Ximending!! That's Like In Japan! 8 Items [Tapioca..Etc] 3500kcal [Use CC] - Duration: 4:24.

(sorry peeps bad audio gives the translator ~Aphexx~ a migrane therefore subtitles will suffer on this video)

Hello its Kinoshita Yuka today we're here at Ximending

its like the shibuya of taiwan I'll be eating all sorts of yummy things here

famous tapioca shop

I love tapioca drinks can't wait

tapioca milk tea

lots of pearls inside

chewy and yummy and sweet

they're deep frying it

freshly made

so hot and steamy

so big

crispy and juicy meat

the chicken is so juicy

the breading is so tasty

fast

the noodles are here so hot

noodles are so yummy/gooey and its got offal meat in it

yum

lu rou fan topped with a sunny side egg

only ever seen them topped with boiled eggs

yummy

the sauce made of soy sauce is so tasty

specializing in duck

duck bowl

vermicelli

tasty

so meaty tasting

boiled duck

so nicely flavored

last is mango shaved ice

lots of big chunks of mango

melts in your mouth

fluffy

sweet and filled with juicy bits of fruit

so nice to be able to enjoy all this in one area everyone please come as well

For more infomation >> 【In Taiwan】 Shopping In Ximending!! That's Like In Japan! 8 Items [Tapioca..Etc] 3500kcal [Use CC] - Duration: 4:24.

-------------------------------------------

table saw blades-sharpening /ostrzenie pil/затачивание пила/銳化 - Duration: 13:43.

welcome

Today I show you my way for sharpening carbide tipped saw blades.

sometimes I let some specialized company sharpening the blade

... but not every time.Why?

The company what sharpening blades very well is far away from me.... so I must ship the blades... so it takes some time when I get back my saw blades.

the local sharpening blade guys are far from perfect.... so I do it myself.

Why do I have to pay for something I'm not happy with

so I making it myself....

that blade cost me $65$ if I remember correct...

that blade for ripping solid wood with 24 teeth

...was in a special offer in a package with others blades....

that why it was quite cheap..

Five times sharpening cost me about equal what new blade....I guess.

This price is depending on the state or the country for sure... and often even the city ...

but here I know for five times sharpening cost me about equal what new blade...

I make it 3 times myself and the forth time I give it for professional sharpening company.

that kind of blade can be sharpening from 20 to 30 times...

I make 3/4 of all sharpening my saw blades myself...

so on sharpening just one blade I can safe money for 4-5 new blades...

If I even screw up some sharpening.. the professionals make the correction...

there are two reason why I make it myself.

#1 ...I make it good.

#2 ...its economic for me.

I am good in that because I am talented and I making this over 30 years...

I grew up in communist country and sharpening machinery had only Communist state factories

... and you know asking them for sharpening saw blades cost you so much time.... money for bribes and vodka...

so most woodworkers at that time did it free hand, like me..

My mentor did it also free hand and had teach me.

He had diamond grinding wheel for sharpening carbide tipped blades.

I bought some stuff...

Its seems to be a specialized precision tool for sharpening the saw...

It quickly turned out that is made in China piece of sh... t

so.... I had to modify it for useful stuff..

I show you what it is...

most important .. good lamp

you must see very well what you doing...

.... use eyes protection and dust mask..

I will not speak of the dust mask....

must mark where you start...

I wear a mask and glasses and go ...

That pieces of oak wood I screwed to the base..

The height of the wooden blocks cause the blade is on the middle of the diamond weal.

there was stuff for precise adjusting ....but doesn't work..

...so I removed it ...

... so I made it and works for me well.

My mentor was using similar diamond grinding weal and little top table saw with wooden blocks ...But the principle of action was the same...

That is my way for sharpening my tipped carbide blades for all kind of saw.

If is more teeth on the blade the the sharpening time is much longer...

always use good quality mask and eyes protection.

carbide and diamond dust is dangerous !

that my adjustable lamp....

you can see the dust.You must clean it up.

I touch the blade and I know the blade is sharp or dull

I hope can use this knowledge.

I know the first couple times can be far from perfect...

but... practice will make you perfect...

Do not make the tools extreme dull...

There is better and easier to sharpening blade when is not extremely dull...

especially when you make it free hand

so I do not dull extremely my blades ...

That is much easier to sharpening them.

so do not dull extremely your blades

If you like it hit the button like. Feel free to subscribe...

Let he power be with you !

For more infomation >> table saw blades-sharpening /ostrzenie pil/затачивание пила/銳化 - Duration: 13:43.

-------------------------------------------

Rosie O'Donnell's Natural Gray Hair Is a Blessing and a Curse - Duration: 6:18.

For more infomation >> Rosie O'Donnell's Natural Gray Hair Is a Blessing and a Curse - Duration: 6:18.

-------------------------------------------

Ranking TV autonómicas octubre: TV3 se dispara y Telemadrid no arranca - Duration: 3:10.

For more infomation >> Ranking TV autonómicas octubre: TV3 se dispara y Telemadrid no arranca - Duration: 3:10.

-------------------------------------------

How to Stop Worrying & Stressing - Duration: 12:47.

For more infomation >> How to Stop Worrying & Stressing - Duration: 12:47.

-------------------------------------------

"Pokotto Colorful Chocolate" Popin' Cookin' by Kracie Japan - BOOWHOWOO How to: DIY Candy #43 - Duration: 5:18.

Hello everyone. I'm BOOWHOWOO

Today

I'm going to make "Pokotto Colorful Chocolate" by Kracie Japan

The cut and colorful piece of chocolates like this

There is

a mold

Colored chocolate

And plain chocolate

Then crunch puff

There are 7 kinds of mold tray

and here is mine for this time

Before making

Cut the tray along the line

OK, here we go!

Tray "A"

Put the colored chocolate

in the mold

as you like

Good smell!

How should I do with th butterfly..?

Done

Next

Sprinkle this crunch puff on top of the colored chocolate

And at last

Place the plain chocolate

They are so tiny

Done

Put it in the microwave oven

and heat it for 10 seconds(When 600W)

Tray "B"

Press the chocolate tightly fitting the pattern

Press, press, and pressing...

Put it in the freezer

for 3 minutes

3 minutes has passed

I wonder how they look like

Take the tray "B"

out

slowly and

Turn over the tray "A"

to remove the chocolates

I did it!

Finished!

Now let's eat right away

From this candy-shaped chocolate...

Yup!

The crispy crunch

and the chocolate

match very well

in the mouth

The colored chocolate

tastes some fruits

About plain chocolate...

tastes plain chocolate :P

Next

A butterfly

Yeah delicious!

It is crispy

This is

my favorite

a flower

Because

I could decorate the way I imagined

Light blue, pink, light blue, pink alternately

And the middle is yellow

I could do just I imagined

The yellow ran over the line...but anyway I love it

Ladybug

I wanted black face

But it is pale blue

Maybe...because it is cold today?

I ate up!

How was the video today?

I hope you like it

Usually DIY candy is made by some colored powder

but this time, I made with real chocolate

That's why

it is better taste

among my DIY candy experiences

It was super easy

And was fun to make my own colorful chocolate

Thank you for watching

See you next video

I will brush my teeth after having this...

No more?

(Mom) It's all gone...

For more infomation >> "Pokotto Colorful Chocolate" Popin' Cookin' by Kracie Japan - BOOWHOWOO How to: DIY Candy #43 - Duration: 5:18.

-------------------------------------------

Calendarios Publicitarios 2018 #2 Calendarios sobremesa Personalizados Mini - Duration: 0:35.

For more infomation >> Calendarios Publicitarios 2018 #2 Calendarios sobremesa Personalizados Mini - Duration: 0:35.

-------------------------------------------

The sneaky way MCI can steal your savings - Duration: 4:34.

When it comes to mild cognitive impairment, there are some tough issues that come up,

and some difficult conversations to be had.

But one topic is so touchy that most families won't even talk about it.

And that's unfortunate.

Because the cost of that silence can be financially devastating.

That's what I want to talk about today.

Hi, my name is Tony Dearing.

I write an award-winning column on brain health and prevention of dementia for NJ.com and

Star-Ledger and I operate GoCogno.com, a website for diagnosed people with mild cognitive impairment.

Today, I'm talking dollars and cents.

And where's why.

Because when someone has mild cognitive impairment, some cognitive functions slip faster than

others.

And one of the very first things to go is the ability to make financial decisions.

The result of that can be ruinous.

Because by the time a spouse or family members realize what's going on, the person may

have made a series of bad financial decisions.

The National Endowment for Financial Education surveyed more than 2,000 adults and found

that in cases where a family member suffered cognitive decline:

47 percent failed to pay bills, or paid them late.

35 percent made reckless purchases.

21 percent had emptied their savings accounts.

The biggest concern is elder scams, and the scam artists are out there, and they fleece

older adults out of more than $13 billions dollars a year.

But it's not just that.

At least that much, if not more, is lost through simple financial mismanagement.

Either way, the money is gone.

And once it's gone, you are not going to get it back.

Granted, this is a really touchy topic.

It's like talking about driving.

No one wants to tell their parent or a spouse that it's time to take the car keys away.

But that's not what we're talking about here.

This is something that doesn't require taking away someone's checkbook, or any drastic

action that strips them of their ability to continue making their own financial decisions.

There are a lot of simple, gentle steps you can take to put safeguards in place to protect

your life savings and make sure that money doesn't somehow just slip through your fingers.

Here are five easy, smart ways to go about it.

1.

Lower the credit limit on credit cards and cancel cards that aren't being used frequently.

2.

Help your loved one set up automatic bill payments.

3.

Give a family member read-only access to monthly bank statements.

4.

Set up a cosignatory on the checking account so that checks over a certain amount have

to be signed by a second person.

5.

Authorize your bank or investment firm to put a hold on larger transactions until they've

been reviewed.

You've worked hard your whole life to build that nest egg for you and your family.

Don't let MCI take it away from you.

If you find this information helpful, I've put these and some other suggestions into

a simple one-page sheet "10 Tips to Protect Your Life Savings."

It's something I offer for free when you sign up for my weekly newsletter.

If you want it, just send an email to me at tonydearing@gocogno.com.

I look forward to hearing from you, and I hope to see you again next week.

Until then, as always, be kind to your mind.

No comments:

Post a Comment