Attention! Smile.
Hello! My name is Alexander. Today
I have a few parcels, but all this is a bundle of one product.
But in order not to delay, we will break this movie into two series,
and in this episode the video light
"YongNuo", model "YN-300 Air Pro".
This video will be unpacking, reviewing and recommending the use of this lighting.
I bought this lamp on ebay for $ 38, and this was the lowest price.
For example, on AliExpress
the same package is presented for $ 40, but with the LetyShops cacheback service,
the link to which will be under the video,
purchase of this device becomes more profitable
just a little 11 cents.
By the way, I, in the city of Minsk, can also purchase
this particular package for $ 70,
that is, almost more than 1.5 times.
As the price of the goods exceeds the threshold of duty-free import to Belarus,
I asked the store manager to estimate the postage package
to $ 20. The goods were delivered from China
to Belarus in 3 weeks. By the way, the track number was tracked,
the manager estimated at $ 10.
And the weight of the package is 580 grams.
The lamp is packed in a tight cardboard box so original, on which there are
QR- and bar-code, which are sent to the official store
with the products of this company. This site is from Hong Kong. Here you can buy flashbulbs,
flash sync triggers, LED video light,
lenses, filters and batteries of this brand.
Well, here's the whole set.
The device itself is light enough, but strong, made of high-quality plastic.
The adapter to the camera shoe is the main attachment that is used to set
the light on the camera, on the handle, on the tripod, since there is a
1/4 inch
hole with a thread on this stand.
In addition, using this screw,
you can step-by-step change the angle of inclination with respect to the subject.
Local, local illumination is possible if you install
a video light on a metal pen.
The rod itself is metal, and the handle, for which I hold, is made of plastic.
It is hollow with stiffeners inside.
The length of the handle is 13 cm. In addition, the kit includes
a stand for mounting the lamp on a flat surface.
So here's the way.
Instruction with illustrations in English and Chinese,
here is such a warranty card,
quality certificate
and the last element - this is such a rag cover
for storing the lamp and its carrying.
On the ribbons.
I note that in this model there is no remote control and additional filters.
By the way, when buying immediately check the number, which is knocked out on the device.
It should match, here is 88629099, with the stickers on the box,
the same number,
and the sticker with the same number is pasted onto the manual.
Well, now let's get acquainted with the main characteristics
and capabilities of this lamp.
Its dimensions: 185x134 and a maximum thickness of 30 mm, taking into account this handle.
Weight with a fastener 262 g.
The manufacturer claims that the LEDs will last 50,000 hours, which is about 6 years.
Under the matt diffuser with dimensions 180x130 mm,
96 bright LEDs are placed on the entire rectangular surface.
And 48 light-emitting diodes are located
between 48 cold-glowing LEDs,
thus forming honeycombs.
This arrangement of the led elements allows to regulate the luminous flux with the luminescence temperature
from 3200 K, it is warm white light,
up to 5500 K - cold white light.
Declared the maximum power consumption 18W.
In reality, this is about 20 W
with a maximum radiant flux of 2000 Lm.
The angle of the emitted light flux is 110 °.
This model is the youngest in a series of luminaries
of the pure Chinese trademark "YongNuo".
And even it has several modifications,
but indicated by the corresponding Roman numerals.
They differ in the number of installed led-elements,
the presence or absence of reflectors, the possibility of remote control
and, accordingly, light parameters and bundling.
At the same time, several led-lamps can be used as the main studio lighting
for photo and video shooting of small objects, for example, video reviews of different goods.
The video camera, which I'm currently shooting a video,
is "Panasonic HC-V770", it's equipped with such an adapter,
you can similarly fix the on-camera video light,
improving the shooting conditions of some family celebrations
in darkened rooms, for example, in cafes and restaurants or in darkness on the street.
The entire interface and controls are located on the back of the device.
And unlike the usual 300th version
of this Pro version, "Pro Led Video Light"
is already equipped with a connector for connecting the power adapter,
which is convenient to use in stationary studio conditions.
The connector is similar to what is used to power the notebook, but consider the required voltage and current supply.
In the battery compartment they are indicated. The supply voltage
is from 8 to 12V and the maximum current consumption is 5A.
The brightness adjustment knob is combined with the on / off button.
Turned on, turned off.
To the right of it is
an LED level indicator,
and the controller has no rotation limitation,
and in the initial state it changes the luminescence brightness from 0 to 99 in steps of one.
Each step of switching is felt tactile and easy clicks.
There are only 4 buttons.
The "Fine / Coarse" button switches from gently adjusting the luminance brightness in steps of one
to a fast, step-by-step adjustment in ten-step increments.
The "Battery" button allows you to estimate the battery charge level from "P1" to "P9",
but an external power source is currently connected,
and when the "Battery" button is pressed, "dc", that is, the DC adapter, is displayed.
The "3200K / 5500K" button allows you to switch specific groups of led elements to the panel.
The brightness of each group must be adjusted separately.
Here is a cold white or warm white light.
Adjustment of the overall brightness of both cold and warm light is not provided.
This means that the brightness levels
after turning off the light
and on are saved.
To save the warm level settings, for example, 16
and cold 58
white light, keep the "Setting" button pressed down
to double flicker.
All. Now if we change some parameters,
and to return to the saved settings, you need to press this "Setting" button once.
And the led panel accepts the conditions that we have preserved.
If your camera is not equipped with a special function,
you can set zero values of cold and warm light, put them into memory.
And in the process of shooting, we change some parameters of warm and cold light.
And in order to finish the frame well, we click on the "Setting" button once
and at the end of the movie the camera darkens the frame.
I will also present you, as in absolute darkness, now turn on the flashlight,
and now I can demonstrate how, from the complete darkness
with the help of this lamp, in principle, you can do this video review.
Well, now I'll show you how the camera light works.
To do this, you need to unscrew 7 screws around the perimeter,
and then this filter should be separated.
We will open such a platform here-a metal plate, and here 96 LEDs are installed.
Such conventional LEDs.
As you can see, they alternate ... There is a cold glow and a warm glow.
They have even different colors.
Next, you need to unscrew here 4 screws in these positions.
I've already unscrewed them. And you can turn the plate.
Power connection is made at four points.
Such an aluminum plate.
And here the circuit itself is assembled on one board.
The board is fixed in the same way, 1, 2, 3, 4, 5 screws.
I also twisted them already. I'll show you a little bit more payment.
Here is the power connector
that feeds the "+" directly
to the LED matrix. So, I already installed 4 screws
and left to put the filter.
So it is put: 4 positions for screws from below and 3 from above.
The back wall is made of such high quality plastic black.
There are ventilation holes.
In some models, reflective reflexes are also installed here,
and here already screwed
into four screws, this part is metal.
This metal one, but the "shoe" itself is plastic.
The fact that the lamp can be fed from an external source, I have already said and shown.
But to use the lamp, it says so, in the field, you need to buy
a fairly expensive battery.
The requirements for this are set out in this battery compartment:
the supply voltage is from 6.5 to 8.5V
and the maximum output of the current is 3A, well, the recommended type of battery
is "Sony" or analog "Sony" and type "NP-F750".
We'll get acquainted with the batteries in the next video, so in order not to miss this video, please subscribe to the channel.
So, why did I acquire this camera light?
Because, as I said already in one of my previous videos,
this year in my family is a jubilee, it will take a lot to shoot,
and not always the conditions will be favorable for this,
so I needed a portable compact
luminaire.
Why did I choose this model and this brand of "YongNuo"?
In principle, I looked at other brands.
And he happened to be in a store that sells photo accessories and goods
in his city, held a similar model,
and it's purely tactile, visually, he did not really like the case itself.
It is executed very qualitatively and, in principle, reminds such a small monitor.
And, as you can see, it does not exceed the dimensions of an ordinary camera by its dimensions.
That's what he looks like on the camera.
Here I'll insert the picture, as it looks on the video camera.
Although it loses to other brands represented by Chinese retailers.
For example, in it there is no possibility, more precisely a separate battery compartment for powering
this luminaire from AA batteries.
This problem, in principle, can also be solved by purchasing an adapter on the Aliexpress
which reminds, in principle, this is a case
from a Sony type battery, but it contains
2, 4, 6, depending on capacity, AA batteries.
But due to the lack of this possibility this lamp is very thin.
But its main advantages are of course it is light, compact,
the price is very democratic, you can say cheap.
Plus - the filter installed here gives a diffuse soft white light, which does not blind
the eyes of those who are the subject of photography.
Therefore, I recommend this lamp. Links will be in the description. Meet, buy.
If the information on this lamp was helpful to you, please subscribe to the channel,
the more we are expected to get acquainted with the battery and the charger.
Rate this video. I say goodbye to you.
And we'll see you soon. Till.
No comments:
Post a Comment