Youtube News: Youtube daily report w Nov 18 2018

Has Absolutely Everythin Backyard studio shed

For more infomation >> Has Absolutely Everythin Backyard studio shed - Duration: 2:16.

-------------------------------------------

เรื่องเงินไม่เข้าใครออกใคร! ท็อป 5 พรีเมียร์ลีก ที่อาจมีการขยับเปลี่ยนเจ้าของ - Duration: 2:43.

For more infomation >> เรื่องเงินไม่เข้าใครออกใคร! ท็อป 5 พรีเมียร์ลีก ที่อาจมีการขยับเปลี่ยนเจ้าของ - Duration: 2:43.

-------------------------------------------

VERA MAGALHÃES: CUBANOS E O RISCO À POPULARIDADE DE BOLSONARO - Duration: 2:01.

For more infomation >> VERA MAGALHÃES: CUBANOS E O RISCO À POPULARIDADE DE BOLSONARO - Duration: 2:01.

-------------------------------------------

Verdadeiro motivo do término de Neymar e Marquezine é revelado e mãe do jogador torce por retorno - Duration: 3:35.

For more infomation >> Verdadeiro motivo do término de Neymar e Marquezine é revelado e mãe do jogador torce por retorno - Duration: 3:35.

-------------------------------------------

Go Vacation | Wii | #24 (Gameplay) - Corrida Off-Road, Barco Inflável e Tiro ao Alvo - Duration: 28:58.

For more infomation >> Go Vacation | Wii | #24 (Gameplay) - Corrida Off-Road, Barco Inflável e Tiro ao Alvo - Duration: 28:58.

-------------------------------------------

Go Vacation | Wii | #24 (Comentado) - Corrida Off-Road, Barco Inflável e Tiro ao Alvo - Duration: 28:58.

For more infomation >> Go Vacation | Wii | #24 (Comentado) - Corrida Off-Road, Barco Inflável e Tiro ao Alvo - Duration: 28:58.

-------------------------------------------

$1 DONUT vs $100 GOLD DONUT 🍩 WHICH ONE TASTES BETTER? | Mar - Duration: 8:05.

For more infomation >> $1 DONUT vs $100 GOLD DONUT 🍩 WHICH ONE TASTES BETTER? | Mar - Duration: 8:05.

-------------------------------------------

Salmos | SALMO 66 - "Ofertas de Gratidão" - Duration: 2:37.

For more infomation >> Salmos | SALMO 66 - "Ofertas de Gratidão" - Duration: 2:37.

-------------------------------------------

Após chorar por ter sido chamado de porco, Evandro Santo é aconselhado por Catia Paganote e toma - Duration: 4:35.

For more infomation >> Após chorar por ter sido chamado de porco, Evandro Santo é aconselhado por Catia Paganote e toma - Duration: 4:35.

-------------------------------------------

Why Not to Buy a Fiat in America - Duration: 5:10.

rev up your engines, mirco del Carpio says what is the worst car sold in

america, I'd have to say the Fiats ,you know Fiat bought Chrysler and then they

started selling their Fiats with the Chrysler's and their sales are now so

crappy that they're even considering pulling the Fiats out of the United

States and just putting fiat engines and stuff into Chrysler's and calling them

Chrysler's, but not even trying to sell the Fiats anymore because there's junky

cars and they have such a bad reputation in the United States from the past

anyways everybody calls them, fix it again Tony cuz they're always breaking,

and I had a few customers that did buy the Fiats in the last three years and they

were all piles of junk and the people got rid of them and said I'll never buy

another Fiat the rest of my life, Anthony says Scotty what's your opinion on a

Volvo 242 1982, those things were tanks, back in the day I had

quite a few customers they had those 242s they could run forever if you took

care of them, they were solid reliable cars and they had a lot of power even

though they didn't have a gigantic engine and they rode quite well of

course being a Volvo they were extremely safe inside too, now of course if you're

talking about buying one now, you're talking about buying what a 37

year old car and you're taking your life in your hands driving around a 37 year

old car, you never know what's gonna break their that old, the rubber, the brakes,

everything's gonna to be going at any second, but they were really solid with

built cars back in the day, Kelly blender says Scotty what's your

opinion I'm trading my 97 Jeep Cherokee XJ for a toyota 4runner

well if you can trade it and get it even trade go right at cuz that 4runner

will out last that Jeep, it'll last so much longer than a jeep there's so much

better made than the jeeps are, odds are you have to pay more money so it

just depends on how much money you want to pay, or if you can find some fool that

wants a Jeep and give you a 4runner take advantage and take the 4runner give

them the Jeep, Steve Lee says Scotty I have a squeaky noise

from the wheels it stops when I brake, wheel bearings or brake pads, that's

normally brake pads, because the brake pads have what are called squealers on them,

prongs that stick out just a little bit above when you're down

metal and metal on the pads, so when you're just driving they drag and squeak

but as soon as you step on the brakes they push so hard that the noise stops

cuz it pushes them out of the way, just pull off the wheels look at the brake

pads and if they're you know thin as a dime then you know it's time to replace them, now

occasionally wheel bearings can make noises, but generally wheel bearings

won't squeak, when they wear they roar and the faster you go, the louder roar

you're going 30 they go roo, and then you're going fifty they

get louder, they don't generally squeak, Romero hey Scotty opinions on a

96 Ford Ranger, those old pickups could last a long time, there a smaller pickup

they're not like a big f150 for hauling tons of stuff around but they can last a long

time, especially if they're standard transmissions, they can be pretty

bulletproof with a standard transmission their weakest point is the automatic

transmission, hey if it's a 96 and it's still driving down the road and running

that'll tell you something, you're talking about

what you know twenty three year old vehicle that's still run strong, yeah

it's pretty solid built a lot of them, David Holloman says, I got an 06

Cadillac DTS v8 Northstar 130,000 miles for $2,700, okay well that's not much

money, but it's a Northstar engine and it's a 13-year old Cadillac, if you're

planning on driving 20,000 miles a year or so, don't buy it'll bankrupt you, but

if you want it as kind of a toy weekend car, go ahead that's hardly any

money and if it runs good now, but before you put any money down, you have a

mechanic check the head gasket, I've got a video that shows how to tell if your

head gaskets blown you can watch that the kit cost 35 bucks on Amazon and

it'll tell you if the head gasket is blowning if the head gasket is blowing you walk, because

do a head gasket job on that thing it's like a five to seven thousand dollar job

and you wouldn't want to buy it then, you want to check that first, Christian

Ivanoff says Scotty my 1990 Mazda Miata aluminum oil pan is stripped, should I try

to re-thread it and put a larger bolt on, why yes because aluminum

is soft is pretty easy to rethread them they have kits just for those aluminum

things, the first thing I do is, get yourself an oversized drain plug that's

self threading I fixed one I don't know about three

months ago on one and it worked great, I went to Autozone I said, hey can you get

me these oversize self-threading oil drain

plugs for this Mazda, they said sure they had one in the back, they got it to me

and I put it in and I screwed it in and then I screwed it out, and then any

threads would come out and then I screwed it back in again and filled up

and away you went, aluminum pushes out to the side unlike steel and so a lot of

times you won't even get any particles coming out, but even if you get a few

particles when you take it out they'll all drain out when you put a quart of

oil in it, it'll come out of the bottom and then you can put it back in again, I've

done lots of them that way, so if you never want to miss another one of my new

car repair videos, remember to ring that Bell!

For more infomation >> Why Not to Buy a Fiat in America - Duration: 5:10.

-------------------------------------------

Patchwork without needle Santa Claus and his Sleigh - Duration: 45:59.

Hello friends, welcome to all my people creative here to a project more in its

channel Arte en Tus Manos, today I bring you a picture made with patchwork technique

previously we had already developed one, here it is, this picture here I leave you

the link so they can watch the video, but then they were asking us

that we did others this time I'm going to elaborate a bigger one I'm going to

apply a new technique called in Patchwork in 3D, I hope you like in this

project, I hope you join me to do it and let out all that great creativity that

we all have

good friends for this project I'm going to

use half sheet of porexpan with a measure of 50 centimeters by 1

meter and the caliber that I'm going to use goes to be of (4 cm) inch and a half you can

handle this same caliber or the minimum they should use is one inch

well this is the design that I made for our table and to be able to work it

we must first transfer it to cardboard or for a slightly thicker material

that here then I made it in a paper of dressmaking then we will transfer it

a cardboard can be that cardboard what I did was pass it

on a poster here you see that the pieces are loose then

first we must pass everything that is the background because

we will work it first in the background and what is the face of the Santa and the

arms and reindeer we're going to work apart

likewise the trees, are left then here I am showing you the

templates of the pieces that go in the background first how can you see here

they have numbers then everything that's going to going in the background will be numbered and the

pieces that will shape the face to Santa and the reindeer will go with letters

of the alphabet then here you

well already transfer and cut them

I'm going to leave all these pieces in the description of the video so that

you can have the templates for can easily elaborate

after having already all the templates cut what we're going to do now is

pass it to porexpan (polystyrene) we are going to do the drawing in the porexpan and a way of

doing it is taking the templates and the Arming as if they were puzzles and

we are drawing each one at the moment that we are going to accommodate it

Then the first thing we should do before this is to make a margin to

porexpan (polystyrene) let's make a margin of 4 centimeters first in all its

outline and then another 2 centimeters

then already within this 2 centimeters that is the dimension that I

I'm going to work with start placing the templates

as I mentioned them we are placing as if it was a puzzle

placing the lines very well and we're going checking

so in this way we are doing the draw slowly and we're placing it

very accurately we are marking and in this way to measure

that we are placing each piece at the end we will have the drawing then the

drawing that we are going to have initially is only the base one seen how he had them

mentioned because the father's face and the reindeer and the trees then the

let's work separately so that's why appear at this time

good friends here then I already have cut the pieces of the characters

that we are going to overcome then I want to show a little here what I did

was to take the template of each one about put it on the fabric in the color that

correspond to each piece and we will leave a little more than fabric size

for example in this case it can be a centimeter, one centimeter more we can

leave in each piece for example in the cap on the face on the arm in the

glove these pieces are going to be stuffed then

let's leave them that way a little bigger so that when we introduce a bit of

stuffed so they stay plump and do not go to be smaller than we think

leave it at the beginning, then there some pieces that are going to go double

example the reindeer, the reindeer also we must cut double the legs,

the body, the head so that more or less like this is going to be the

way, there are other pieces that go simple for example the beard

these trees these little van simple these two big double doubles,

of everyone in the molds I'm going to leave specified which pieces go double and

which are simple in the case of horns here I will use a little bit of

black eva rubber that you use and frosty black but you can

use a normal black, if they get it that way they can also use it

ready friends then here we already have all the pieces of the characters that

let's overcome now I'm going to show how we should take out the pieces of

base to remove the pieces from the base we must

do a procedure similar to the one we did with the pieces of the characters

here I wanted to show you the colors that use locate each template in the

corresponding color and in this case with the pieces of the base we are going to leave a

little more fabric already if you can see there left over fabric can leave some

2 centimeters in each piece approximately then in this if

we must leave a little more fabric depending then because here we go to

introduce the fabric by the porexpan (polystyrene) so we need good

amount of fabric is not going to go stuffed so we're just going to

introduce something that I also forgot mention them before is that when

we are going to locate the template generally the fabrics are going to

use on the back to mark them then the template

we will also use it for the that's why we should mark the

templates which is the front in this case these are numbered those of

I have the characters numbered with letters then we know that that's the

front we will simply locate it by the back and the back of the fabric

we also mark and afterwards she goes to that is going to coincide we will look good

when we place it on the side that is already the template matches

with the shape and that tie us correctly in the whole figure that

let's do good now then let's go to proceed to introduce this fabric in the

base of porexpan (icopor, unicel, polystyrene) good before introducing the fabric

we must delineate very well in the in the the pieces each of the

pieces that we take out to be able to know where to cut

exactly ready then what I did it was with a highlighter to delineate

the painting the base of the picture that is the that we are going to work at this time

I also want to show you that we should also have cut with batting the

individual pieces ready the templates which correspond to the base we should take

a thin wadding this cloth is the material that they put on quilts

between was like to fill them by some way to say it then we're going to

use a thin wadding thin that we get only is by

give some relief to the base of the picture

the correct way then is to take the template and place it on the batting the

wadding we are going to use is the same dimension of which corresponds to

picture then we will place each one just like we did at the beginning what

we can place as if it were putting together a puzzle and let's mark each piece

individually ready in this in the moment to cut each piece we are not going

to leave a little bigger as well we did with the fabric but we're going to

Exact cut, we need every exact piece after that then that

let's have all the pieces marked what we can start cutting

and so we should have the batting and cut well each independent piece as well

what we did at the beginning to get the molds then we must cut all

these pieces and now if we can proceed to put together our picture I remind you that

we also have to cut some strips to do the same in the framework of our

picture ... and then now if we continue with our project

friends with all the pieces already cut now we can start to put together the

picture then what we are going to do is take a spear point cutter or a

exact and we're going to start drilling by all the lines we are going to start

delineate to say it somehow to be able to introduce the fabric in these

parts then the spear point cutter we will introduce it here in the porexpan (unicel, icopor, polystyrene)

we will introduce it more or less up to half of the porexpan

then anyway and we gave everything it will not happen to the other side then

We can work quietly if We are working with this caliber of

Then, what we do is start

to delineate with the cutter and throughout the line where we had already

marked

as if we were cutting but not let's go through the sheet

in this way

let's try to always leave down the line for the guide we have in

base

of that first and in this same way let's complete the whole picture

here for example then already complete the outline of this piece then now

let's take a parrot beak lime like this they call her in my country I do not know how the

call in your countries is this type of lime

and we are going to start taking the pieces for example first the piece of wadding the

let's place

and then we will place the piece of cloth

then we will try to locate them and proportional everywhere

and at this moment we are going to begin to introduce the fabric

with this curved end of the file we're going to start introducing the fabric

until completing the figure

well in this way

if suddenly they see that it is too much cloth we can cut a little

good friends here then I wanted show them a little as I have already

advance the table I already introduced these three other pieces

the important thing is to do it evenly and distributing the fabric that suddenly does not

we will be longer on one side than in another at the time of introducing

that we will not have very little fabric left on the other side

then we introduce it in a side and we are tempering the other side to the

view and we are doing the same towards here when we have finished introducing it

it is important that with the same file always with this curved part let's go

finishing aligning the fabric on when

has introduced then these parts and we do well

so that it will not be suddenly stacked the fabric here inside the

slot and at the time of putting the cloth that corresponds to this piece here does not

is going to introduce us well and this then when we finished

introduce the fabric of these we do this what am I saying and there we proceed to

continue putting the other piece these are small and with the cutter there

cut or perforated all the whole the drawing

so here I am going to show you again we take a small piece of

wadding

and the fabric that corresponds to that piece and we're simply going to introduce it as

that go entering where it corresponds

there are times when the fabric suddenly does not give us then we must do

small cuts

for example in this part, we look to go

entering couple and we are giving the shape of the piece that we want

introducing a side let's go introducing the other

in this way the figure is already

we try that the wadding does not come out and go

being well armed

friends like this and this way

way then let's do all the rest of the pieces

that we complete the picture with here a small piece after

we ended up finishing off thus distributing the fabric that remains inside

we can not introduce too much lime because we can drill or go through

the porexpan (icopor, unicel, polystyrene) here is another piece more and we continue with our project

good friends then here we already have almost the base of the finished picture here

What I did was to introduce the fabric to make the internal margin of the box here

You can see the house the sleigh with gifts, then all of these

pieces are almost finished is it I had forgotten to show you something that

suddenly at first I overlooked it but then here I am going to show you

we must also make a margin for the back of the box a margin of 2

centimeters from the end inwards then let's make a margin

2 centimeters and that margin also what let's drill with the cutter let's go

introduce the cutter and do the same as we did for the front part here in

the corners we must also make a diagonal and enter the cutter but

then we will not introduce it much more or less a centimeter of

depth in these diagonals because on the other side we must also do

the same look here the diagonal of this part of the

front is longer but then we need you not to find

those cuts then we should introduce approximately one centimeter to each

side because this porexpan (icopor, polystyrene) has 4 centimeters thick, then

here we still need to give it a little more decoration to the pieces by

example we should decorate the gifts and some details that we are going to place

this then is almost finished the basis of our table and now we're going to

continue working with the characters

good friends then here I already have the

ready characters we already have all the cut pieces I only have here

put one on top of the other to show them how it should be done

so here I want to show you also what elements are we going to use

additional for example buttons we're going to need two buttons can be about

buttons so colorful we are also going to need jingle bells a colored ribbon

it can be like that in two tones and we're going to use a little gold cord

also a half middle button buttons ball is called this this button is for

the eyes of santa and we will need some small beads of black color

for the eyes of the reindeer here in the trees at the beginning I had them

shown We are going to cut two pieces for the

trees in different shades but then additional to that we cut another

piece to overcome to give a little of contrast to the trees so that they do not

look one color ready then with the trees and with the pieces of

of the reindeer and the face of santa the hat and the arm what we are going to do as they are

double pieces are going to be joined by two ends and then we will introduce the

filling, the filling that we are going to use it's called siliconized cotton

this is what we are going to introduce no we must not put too much that we

it is too fat each piece but what proportional, then here is

some pieces that as I mentioned we are going to fill and others that are only

to hit on seen sunsets these are the pieces that are going to measure on sunsets

and all this we are going to unite for now with hot silicone if you want

use the stitch stitch a stitch that Lili has also done in

other tutorials can join them with Festo stitches and then fill but

then I'm going to do it with silicone hot then now we can start

to join our characters to start then I'm going to take the

I reinvent this then what we are going to do as I had mentioned to you is to take the

two pieces and we are going to join them for this we must always be very careful in

that the pieces are well located and we're going to start applying the silicone

a thin line,

a thin line and it must be continuous not We can leave any piece without applying

because then there will be us A hole

this we are going to apply first a part and then the other

As I told you, we must locate what is perfectly aligned

and we should not put too much pressure so that the silicone does not come out

the edges

in this way

gently press

for example here in the leg we should leave the bottom part to be able to

Fill

A) Yes

the silicone should be fine hot

after it is already well joined we will proceed to introduce the cotton

silicone or cotton for filling

so through the hole that we left in the part

down

It is good that you let it dry very well the piece to start

introduce the cotton then as you see here we are doing a

little pressure for the cotton between very well in the piece

and we are going to take a little more

we can fill in that proportional

we should not exaggerate in cotton

and the piece

it is well proportional we introduce that nothing will remain

of cotton on the outside at the moment of paste

and here in the last part we finished sealing the piece

do not apply too much silicone neither

and try to make it on the edge and we're going to stick more in

and how is the piece I am already

the paw of the united reindeer in the same way then we are going to

fill all the other pieces equally that the face of santa the cap the arm and

hand

good before continuing filling

I wanted to stop to show you how put together the face, then the face the

we are going to paste also in the same way we leave a space to fill in but

then before filling we are going to paste these pieces here is the snout that are

the pieces to superimpose then is the nose and the snout that we are going to

hitting like this is going to stay together like the ears then these two pieces the

let's join with silicone so that so they already have lists then what

what we are going to do is apply silicone and stick the muzzle in the part

correspondent after that then we are going to lift

here we are going to paste the silicone we are going to paste up here and then there we go to

begin to stick your ears then we are going to leave a little more

above we are going to apply a point of silicone let's do it here once and for all

if we apply the silicone point let's hit the ears

it will be like this inside and the horns in the same way go more

up, are foami or eva rubber

so, then when we follow the piece all

this is going to be inside

we are very well ready look how it looks then

what we are going to do is fill in and we end up sealing then we will

stay like this in this way, when we are finished

of fill and seal then we go to

take the accounts we had and we're going to paste a two sales to the little eyes we

let's paste on the site correspondent

well then here I already have the pieces and I have sealed except

the Santa hat this still not what let's seal we just paste here

on the edges this part we leave it open and what corresponds to the glove to

Santa's hand is not going to close in this part below you subtracted

all the other pieces were filled and sealed now I'm going to show you a

little as we should arm the reindeer for arm this reindeer then with everything

this sealed as I told you now let's continue decorating with the other pieces

that great superimpose then this piece is for the rear leg this for

the front leg we are going to paste these pieces with silicone

the pieces this I did with silicone join all these pieces as they already

had mentioned earlier but if you want can use a

stitch called festo stitch then I go back and I remind you

had mentioned but then there are people who really like this guy

stitch otherwise we must apply the silicone very well and

it's a good slim cord I wanted to go back to take back that information so that it

well clear Now let's paste the pieces by applying

hot silicone then simply now let's apply in this part and

we are going to stick more pieces in the part that corresponds to the face

I had told them that we were going to hit some beads (spheres) then what I did was

cut ovals in colored cloth white and I pasted the beads (spheres) to the fabric

well then we will be more expressive face we're going to do

this way, this is like the chair of the reindeer, it's like a saddle

we are going to paste it here we are going to apply the silicone on the top edge first and

we are going to match it with this this way around here after I'm

well stuck then we have left these long cords to these pieces because no

I showed them but I hit the cord like that as delineating the

and we are going to let the cord remain long up and down and this piece

It's also going to be longer and ready after this is here dry and

well stuck let's stick the laces backwards we're going to apply a bit of

silicone here and we're going to paste the laces so that this goes around

and do not go to see the tips ready not we are going to be the tips looking and

it is more aesthetic then when you paste it well and when you paste it down here and give the

back you will see one more appearance good aesthetics friends here I have a

reindeer already armed that I want to show you how it looks

here already the pieces are united look and this part and here I put a necklace

with a bell look how it looks

that's how our reindeer should look and now we can proceed to assemble Santa's head

well then to put together the head of

Santa let's take the hat that I eat I mentioned them we have not sealed it yet

and we will place it in the position correct this position would be leaving

this part of where is this curve we leave about two centimeters

up and we will have as a guide to this part to paste the hat then

would go from there down to where get here to the top

then we apply the silicone first On the one hand we introduce the head

we locate it as it is and we are going to let paste after very carefully let's

apply another bit of silicone on the part

what remains to be pasted in the part that is missing and we will sustain

also until it is well stuck after the cap is firmly fixed

let's take the beard this beard use a stuffed animal

then we are going to place it in this way then as you realize this

have a curve here let's let between the hat more or less

three centimeters the fact is that the location of the beard

is this comes from here and goes around the face

until it meets or ends with this curve with this curvita that is

the precise location of the beard then the first thing we do is paste

this and now let's paste the whiskers in the eyes and eyebrows

good friends here and I hit then the beard and hat look here sealed here

on both sides and the beard located in the way I had shown you here

press two points where I'm going to paste the I made my eyes with the buttons

half ball and just like in the reindeer I cut a circle in cloth and the

I pasted on these for later locate them

in the face then the little eyes still we do not hit them depending on how we

let the rest then here we go to locate the mustache

all this remember that I'm hitting with hot silicone

then the mustache we should see this curve that has the beard to locate it

correctly and this we are going to do this so that we stay like this then for

keep in mind we will not be left run the mustache make the location

so we stayed like this and the whiskers giving this location this

way now we're also going to paste this part that is characteristic of the cap

holy then this piece we're going to superimpose by applying the silicone here

by the edge or in the piece and that is not we will be seeing the red part

on this side, for this we must put it on the right side, it's not going away

to be watching this A) Yes

after having that piece already joined then we proceed to paste the eyes

you place them depending as they have been stuck

the beard and the whiskers you place the eyes first where they want it to be

and there in Mark with a pencil soon they make a point like that the same as I did

so that later they can put the silicone and paste it more easily and

then let's hit the eyebrows are about bits that cut in a triangle to

give the shape of the eyebrows in this same material or if they want the white fabric in

the one that we made the bottom of the eyes then this would be for the face and for

last we are going to cut a circle in cloth in fabric of the same color as the bottom of the

from Santa's skin, a circle of 4 centimeters and a half in diameter and with

needle and thread we will start to put the needle around the contour for later

be able to pull the needle and make a nose this then this what we are going to do

is to talk about it and look at the fabric is collected and will give us a rounded shape

for this we are going to take a little silicone cotton we are going to introduce you

cotton and then we are going to tighten well so that

this make the shape of the nose already with the cotton in then with

the thread we can finish and after that we try to round it up a bit more

when we have it secured with the what we are going to do is apply a

little silicone in the back and we are going to stick it here where the nose corresponds

and so the face of Santa must be ready

already here paste all the parts also place a gold cord for

give more decoration to the hat and a rattle that I sewed here on the tip

this way the head of the santa now let's put together the arm to

the arm then let's take it in this position the thin part for

up and it's wide down we're going to place the glove that as I mentioned them

We did not previously seal apply the silicone in this part and

then we're going to hit it like that When it is dry, we will take a

little fabric of this same we use for the hat and we're going to

cut a strip which we paste from this way so that the arm in this way

We will not join the arm to the head because all these pieces are going to

join one by one at the base of the box I also want to show you the trees

he had taught them they are already stuffed we should not introduce too much stuffing

and we sealed it in this part and here with the double color so that

different tonality and here the little ones I also hit this part already

good friends continuing with the base now we are going to finish doing some

details that are missing for example here I will place a golden cord we

we take a cord we tie a knot with the two rings almost at the end and this

we are going to paste it right in this part our part that is the sack of

gifts then we apply silicone for all that

edge here at the ends what we do it with the same file as

we use before we are going to introduce here the ends so they do not stay

watching and applying the silicone so you are tapes that you see here is for

place the ribbons traversed here every gift then here I chose these

colors you can choose others the what do you like and then we are going to

place a tape like that and another like that we are going to place crossed ribbons like

when the gifts are tied with ribbon then that a little more decorated for

the moon I got a lace combined with silver and gold this is

optional if you want to do it if they do not leave it easy and simply this

we do the same thing we apply silicone we introduce the ends and here in the

home with a thinner tape can be of

dark blue color as well as this or of black color we are going to introduce the tape

well to make them like the bars of the time of the windows and here we do what

then we apply some dots of silicone and on the ends

we introduce the tape here for the chimney I cut a piece for

to introduce it in this way as we will have a little snow

we do the same procedure

then the chimney will be like snow on the tip

ready friends let's do this and then we will place what is the

coating the frame then let's place the fabric I will use a fabric

of green color doing the same procedure introducing it here

we turn around and we are going to introduce by the other slot that we had already made

good friends here then I already put you the coating to the frame

look how it looks and I also made a effect to the house we can do here

all right here at home

What I did was draw some lines and that I did it with a brown marker

then we just do it like that we trace with a rule we are guided and that

give an appearance that is wood then it is a detail more also them

I want to show that here at the extremes

here at the extremes, it suddenly forgot to mention in these

extremes we should make a cut in diagonal with the cutter

let's make a cut like that diagonally to be able to introduce the fabric and that

agree here with both sides after to enter it we can take a bit of

liquid silicone and apply a little to that the fabric does not come out this in the

I also want them back show something else I have not yet placed

this piece covering all this then here

what we are going to do is place this this piece is a piece of cloth

take a cord the cord is about 25 centimeters long and this piece has

about 12 centimeters long by 4 or 5 centimeters down ready

this is to place it here back and power have how to hang the picture ready

then we are going to make a mark of 20 cm inwards end

on both sides and this piece is going to paste even if we coincide just in this

then we are going to locate that the cord or lace remain below if

you want it to excel what can put like this or

preferably we paste it that is flush with the frame, we will stick how to make two

pieces and we're going to leave them here the brand we made of 20 matches

centimeters then in that part just let's paste simply by applying a

little hot silicone

we leave one side and then paste the other

let's say these two pieces and after that then we're going to start

enter the fabric that corresponds to this part already when we get to

is this side what we are going to do is search and make a small cut in the

fabric to get this cord or the cord over there and that since our

ready picture that can be hung ready then here I already introduced the cloth

and I took out the ropes and as I mentioned we make a small hole and

we simply take out the cord to each good side already with this well and finished

we can continue with the part the front and what we are going to do is

start hitting the characters then let's take the arm of santa

and the head and the first thing we hit is the arm guiding us always with this

same shape of the sled then let's take the arm and we will place it like this

ready then we are going to apply silicone in this part

and what we are going to do is place it and make pressure we already know in

what position are we going to hit then easy to see the gold

and we are going to press for it to be well fixed

after this piece is already stuck then we continue with the

head of Santa

Santa's head then guiding us can also be located with the drawing

can be guided with the drawing then more or less we know what

this part of here a little between the moon and the gifts that

to this tip of the hat anyway It is so strict if you want it

hit more raised or be like you wish you can locate it here

let's stick first apply silicone in the head and then we're going to apply

on the border

we apply the silicone

well fixed

in the same way as we did with the arm then let's make pressure

so that he is well stuck and so the saint is already well stuck

after that then we are going to paste the trees here I already locate them

guiding me with the position is from the I draw here this other tree also already

I stuck it and this big then the way of pasting these trees as they are

rellenos entonces vamos a pegarlo aquí en el borde

y vamos a aplicar un poco de silicona here in the center

principalmente necesitamos que acá esta parte de abajo quede bien unida

bien pegada

el resto ya va a quedar un poco levantado pero entonces esta parte de

abajo debe quedar bien unida acá

hacemos un poco de presión y ya queda pegado

y es que en esta parte no va a quedar levantado del árbol lo mismo que hicimos

in this bueno y ahora ya podemos pegar los renos

vamos a tomar cada reno aquí les voy a mostrar yo a estos renos

les coloque un cordón, este tiene un largo de 15 centímetros se lo tape aquí con

la unión, con un botón cada uno y el otro tiene un cordón de 30 centímetros de

largo entonces el reno el del cordón corto lo vamos a ubicar aquí en esta parte

donde está la manito del Santa que coincida con esta parte y este

cordón lo vamos a pegar con con un punto de silicona debajo de la mano de Santa

y el otro reno que va a quedar aquí más corrido y más hacia abajo vamos a pegar

el cordón por la parte de arriba de la mano de Santa

esto entonces con un punto de silicona nos van a quedar así las dos cuerdas ya

estos muñecos de todos modos no hay que aplicar demasiada silicona podemos

aplicar un poco aquí en el cuerpo en la cabeza y un pequeño punto en estas partes

si ustedes quieren dejar que las patas queden así libres entonces solo aplican

en el cuerpo y en la cabeza esta es la manera correcta de pegar y de ubicar los renos

bueno amigos y queda listo nuestro

cuadro que he hecho en técnica patchwork en 3D espero que les haya gustado este

proyecto que lo disfruten bastante y en esta temporada navideña también quiero

invitarlos a que se suscriban si aún no lo han hecho para que formen parte de

esta gran familia y también recordarles que activen la campanita para que les

llegue la notificación de cada nuevo proyecto que hagamos, bueno amigos como

siempre esperando que estén con nosotros en cada nuevo proyecto un abrazo fuerte

para todos y nos volvemos a ver aquí con más Arte en Tus Manos

For more infomation >> Patchwork without needle Santa Claus and his Sleigh - Duration: 45:59.

-------------------------------------------

イングランドに逆転負け　ラグビー日本代表英国遠征 - Duration: 1:32.

For more infomation >> イングランドに逆転負け　ラグビー日本代表英国遠征 - Duration: 1:32.

-------------------------------------------

Jo Ho Chuka Hai Jo Hoga Huzoor Jante Hain Naat - Rabi UL Awal New Kalam - Duration: 12:16.

Jo Ho Chuka Hai Jo Hoga Huzoor Jante Hain Naat

For more infomation >> Jo Ho Chuka Hai Jo Hoga Huzoor Jante Hain Naat - Rabi UL Awal New Kalam - Duration: 12:16.

-------------------------------------------

URS Qawwali 2018 - ख्वाजा खबीर हसन - Dil Jis Se Zinda Hai Wo Tamana Tumhi To Ho - Duration: 11:48.

URS Qawwali 2018

For more infomation >> URS Qawwali 2018 - ख्वाजा खबीर हसन - Dil Jis Se Zinda Hai Wo Tamana Tumhi To Ho - Duration: 11:48.

-------------------------------------------

Spy From Cairo Best Arab dub Album - Duration: 46:38.

For more infomation >> Spy From Cairo Best Arab dub Album - Duration: 46:38.

-------------------------------------------

Has Absolutely Everythin Backyard studio shed - Duration: 2:16.

Has Absolutely Everythin Backyard studio shed

For more infomation >> Has Absolutely Everythin Backyard studio shed - Duration: 2:16.

-------------------------------------------

Treestand Hunting Tip for Deer Hunters

For more infomation >> Treestand Hunting Tip for Deer Hunters

-------------------------------------------

5 Foods You Didn't Know Originated In America - Duration: 4:08.

For more infomation >> 5 Foods You Didn't Know Originated In America - Duration: 4:08.

-------------------------------------------

【Ｔリーグ】張本智和が土壇場から圧巻の第４試合、延長戦と２連勝「今まで経験したトップクラスの緊張感」 - Duration: 3:23.

For more infomation >> 【Ｔリーグ】張本智和が土壇場から圧巻の第４試合、延長戦と２連勝「今まで経験したトップクラスの緊張感」 - Duration: 3:23.

-------------------------------------------

【Ｔリーグ】大阪ダービーに敗れた日本ペイント・三原監督「次は４―０で勝てるように」 - Duration: 2:53.

For more infomation >> 【Ｔリーグ】大阪ダービーに敗れた日本ペイント・三原監督「次は４―０で勝てるように」 - Duration: 2:53.

-------------------------------------------

5 MISTAKES I WISH I AVOIDED in CLASH ROYALE - Duration: 11:48.

For more infomation >> 5 MISTAKES I WISH I AVOIDED in CLASH ROYALE - Duration: 11:48.

-------------------------------------------

Arsenal legend picks out the two most important players in Emery's revolution - Duration: 3:37.

Arsenal legend Ray Parlour has picked out the two most important players in Unai Emery's squad

Following back-to-back defeats against Manchester City and Chelsea to start his reign as Gunners head coach, the Spaniard has managed to oversee a 16-game unbeaten run across all competitions

As a result, the north London outfit went into the international break three points outside the top four and upcoming games against bitter rivals Tottenham Hotspur and Manchester United will examine their credentials of claiming a Champions League spot come May

Most of the plaudits for this run has fallen to the attacking players. Pierre-Emerick Aubameyang is the leading scorer with nine goals, Alexandre Lacazette is a close second with six, while the likes of Mesut Ozil and Alex Iwobi have come in for praise too

However, Parlour believes Lucas Torreira and Granit Xhaka deserve their fair share of credit

The Uruguay international arrived from Sampdoria in the summer and has struck up a promising understanding with the Swiss pass master in recent weeks, even helping the 26-year-old to improve his game and alter the view of some Gunners supporters

"Torreira's changed a lot of that," Parlour told the Daily Star . "I think in midfield, Xhaka wasn't really a proper holding midfielder

"I've seen the difference now, they're a lot more hard to break down now than they was at the start of the season, because Torreira wasn't playing

You won't believe how important those players are, the two in midfield. "Gilberto Silva, he done a wonderful job in that unbeaten season

And those sort of guys, again you won't see them a lot during the game, but he does a great job

"So it looks a lot more balanced now with Torreira playing." Xhaka was a big money signing from Borussia Monchengladbach in the summer of 2016 and has divided opinions amongst fans and the media alike with his inconsistent performances

An example of this has occurred in the Gunners' last two games. He was superb in the draw against Liverpool but then made a huge error which resulted in Wolves taking the lead through Ivan Cavaleiro and was thankful that Henrikh Mkhitaryan saved his blushes late on

With that said, his performances in general have improved and many will point to the signing of Torreira as the main reason

Lucas Torreira v Neymar in pictures: The titanic battle as Arsenal star monsters Brazil ace View gallery Keep up to date with the latest news, features and exclusives from football

london via the free football.london app for iPhone and Android . Available to download from the App Store and Google Play

For more infomation >> Arsenal legend picks out the two most important players in Emery's revolution - Duration: 3:37.

-------------------------------------------

'It Isn't About You': Volunteer Has Helped Homeless For 20 Years - Duration: 1:40.

For more infomation >> 'It Isn't About You': Volunteer Has Helped Homeless For 20 Years - Duration: 1:40.

-------------------------------------------

Life, Liberty & Levin 11/17/18 7PM | November 17, 2018 Breaking News - Duration: 33:00.

For more infomation >> Life, Liberty & Levin 11/17/18 7PM | November 17, 2018 Breaking News - Duration: 33:00.

-------------------------------------------

Why Fiat is Going to Stop Selling Cars in America - Duration: 5:10.