Youtube daily report w May 13 2017

Whats up guys its me Disciple!

Un'goro is in full swing now, and we're quickly finding out that some quests are broken,

others are terrible, and still others are somewhere in between.

Quests are a new card type with this expansion, and they explore a lot of cool design space.

Still by the time this video is released everyone will probably be really sick of Crystal Core,

so today we thought we'd take a look at some fan made quests, and the kind of impact

they could have on the game.

Let's get to it!

https://www.reddit.com/r/customhearthstone/comments/5zxxrx/i_will_know_a_quest_card_for_warrior/ First up we have I Will Know by Deagle81!

This warrior quest requires you to discover 5 cards, which might require a little bit

of creative deckbuilding but shouldn't be too hard to complete.

The reward in "A Guy" is pretty incredible though, as you get a three mana five/five

taunt that discovers you a minion, weapon, and spell, and they all only cost two!

Since you've satisfied the condition of discovering five cards, it's safe to say the

games well underway and you have a lot of mana, so it's not inconceivable to play

"A Guy", find the biggest minion, weapon, and spell you can, and then cast them all

in the same turn.

Overall a really strong quest with an awesome reward, and one

that might see a good amount of play if it was printed!

https://www.reddit.com/r/customhearthstone/comments/5wm5eg/who_knew_quests_could_be_this_uh_fun/ Next up it's Delve Flesh by QuickKiwi!

This warlock quest activates once you've dealt 15 damage to your hero, and the reward

is "Kragthari, Broken One" which casts drain life on all enemies when you play him

and whenever you use your hero power.

Now this quests condition is actually pretty easy to satisfy in warlock between your hero

power, flame imp, spreading madness, pit lord, and a variety of other options.

The hard part is staying alive while damaging your hero so much, but with taunts and healing

you can probably do a decent job.

The reward is really strong, since Kragthari pretty much wipes your opponent's board and

heals you a bunch, but it's worth noting that unlike many other quest rewards, he doesn't

straight up win you the game, and once he's removed all you really got was a pseudo board

wipe that healed you.

Still though definitely a really strong card, just not one you can really use as a finisher.

https://www.reddit.com/r/customhearthstone/comments/5x7us3/the_quest_itself_is_your_reward/ Our next card is Stand Against Dinosaurs by

AcidNoBravery.

This one's kind of cool because the reward is the same as the quest, and that's summoning

5 silver hand recruits!

This card is pretty sweet since it explores having a low requirement low payoff quest,

although it does have some awkward synergies with cards like stand against darkness, since

you can only have seven minions out at once.

This could have been fixed if it put a zero mana spell in your hand that summons five

silverhand recruits, but that kind of ruins the text formatting of the quest being its

own reward.

Either way the power level on this isn't great, but it's a super cool design.

https://www.reddit.com/r/customhearthstone/comments/61fcg5/priest_quest_silence_of_the_unicorns/ Up next it's Silence of the Unicorns by

msau92.

This quest requires you to have five friendly silenced minions on the battlefield at once,

with the reward being the purifier, a 5 mana one/one that literally makes you win the game

when you cast it.

Now in standard this seems way too hard to pull off, and

probably just isn't worth it, although people would definitely try.

In wild though, silence of the unicorns plus wailing soul would be insane, and you could

play a ton of card draw and then wisps and other free/cheap minions or tokens to try

to combo off as fast as possible.

Wild is a pretty fast format so maybe that wouldn't even be a good deck, but either

way this quest is awesome and would definitely be worth experimenting with if it was in standard.

https://www.reddit.com/r/customhearthstone/comments/60xzdw/sunwell_quest/ And finally it's Channel Energy by Hot_Local_Single.

This mage quest needs you to collect a total of ten unspent mana, so each time you pass

the turn with unused mana it gets added to the Channel Energy counter, and you have to

get up to ten unused mana.

The reward is the sunwell, a five mana spell that let's you have a max of fifteen mana

and makes your cards cost one less.

Now that might sound super broken, but not only do you have to pass the turn with unused

mana which is usually bad but you have to collect ten unused mana crystals!

This obviously can't be something you do in the early game, since your opponent is

developing his board and attacking you, so it's more something that just happens naturally

in the late game once you're out of cards to cast.

But if you're out of cards getting mana from the sunwell isn't good, and if you have

lots of cards you probably need to be casting them to not lose.

There could be some kind of freeze mage deck that just frost novas/blizzards every turn

and saves mana off that, and then otks with the sunwell, but it's questionable how good

that deck would be.

Still Channel Energy definitely explores some cool design space.

Those are

some cool fan made quests we've found, what would your design for quest be?

Let us know in the comments!

And it looks like that's gonna be it from me, if

you enjoyed the video drop a like, subscribe if you want, thanks for watching, and I'll

see you guys next time!

For more infomation >> Hearthstone - 5 Crazy Fan-Made Quests! - Duration: 8:52.

-------------------------------------------

Gta 5 Turismo R/Z-TYPE Down MT.Chiliad(turn subtitles on plz for text talk) - Duration: 3:40.

For more infomation >> Gta 5 Turismo R/Z-TYPE Down MT.Chiliad(turn subtitles on plz for text talk) - Duration: 3:40.

-------------------------------------------

Si j'avais Quatre Dromadaires. Chris Marker, 1966 (subtitulos galego e español) - Duration: 49:04.

For more infomation >> Si j'avais Quatre Dromadaires. Chris Marker, 1966 (subtitulos galego e español) - Duration: 49:04.

-------------------------------------------

Deixamos seu sofá como novo, com um serviço de qualidade e segurança - Duration: 1:09.

For more infomation >> Deixamos seu sofá como novo, com um serviço de qualidade e segurança - Duration: 1:09.

-------------------------------------------

The Legend of Zelda: Skyward Sword | Wii | Gameplay Comentado | Parte 39 - Duration: 33:48.

For more infomation >> The Legend of Zelda: Skyward Sword | Wii | Gameplay Comentado | Parte 39 - Duration: 33:48.

-------------------------------------------

Scrapbooking Blackboard Patchwork - Duration: 3:41.

For more infomation >> Scrapbooking Blackboard Patchwork - Duration: 3:41.

-------------------------------------------

Messaggio per la vostra notte. 13 Maggio - Duration: 0:51.

For more infomation >> Messaggio per la vostra notte. 13 Maggio - Duration: 0:51.

-------------------------------------------

UM video de ROBLOX!! - Duration: 10:44.

For more infomation >> UM video de ROBLOX!! - Duration: 10:44.

-------------------------------------------

GRUPO DA MELHOR IDADE DE ARARAQUARA - 28/04/2017. - Duration: 30:08.

For more infomation >> GRUPO DA MELHOR IDADE DE ARARAQUARA - 28/04/2017. - Duration: 30:08.

-------------------------------------------

Hearthstone - 5 Crazy Fan-Made Quests! - Duration: 8:52.

Whats up guys its me Disciple!

Un'goro is in full swing now, and we're quickly finding out that some quests are broken,

others are terrible, and still others are somewhere in between.

Quests are a new card type with this expansion, and they explore a lot of cool design space.

Still by the time this video is released everyone will probably be really sick of Crystal Core,

so today we thought we'd take a look at some fan made quests, and the kind of impact

they could have on the game.

Let's get to it!

https://www.reddit.com/r/customhearthstone/comments/5zxxrx/i_will_know_a_quest_card_for_warrior/ First up we have I Will Know by Deagle81!

This warrior quest requires you to discover 5 cards, which might require a little bit

of creative deckbuilding but shouldn't be too hard to complete.

The reward in "A Guy" is pretty incredible though, as you get a three mana five/five

taunt that discovers you a minion, weapon, and spell, and they all only cost two!

Since you've satisfied the condition of discovering five cards, it's safe to say the

games well underway and you have a lot of mana, so it's not inconceivable to play

"A Guy", find the biggest minion, weapon, and spell you can, and then cast them all

in the same turn.

Overall a really strong quest with an awesome reward, and one

that might see a good amount of play if it was printed!

https://www.reddit.com/r/customhearthstone/comments/5wm5eg/who_knew_quests_could_be_this_uh_fun/ Next up it's Delve Flesh by QuickKiwi!

This warlock quest activates once you've dealt 15 damage to your hero, and the reward

is "Kragthari, Broken One" which casts drain life on all enemies when you play him

and whenever you use your hero power.

Now this quests condition is actually pretty easy to satisfy in warlock between your hero

power, flame imp, spreading madness, pit lord, and a variety of other options.

The hard part is staying alive while damaging your hero so much, but with taunts and healing

you can probably do a decent job.

The reward is really strong, since Kragthari pretty much wipes your opponent's board and

heals you a bunch, but it's worth noting that unlike many other quest rewards, he doesn't

straight up win you the game, and once he's removed all you really got was a pseudo board

wipe that healed you.

Still though definitely a really strong card, just not one you can really use as a finisher.

https://www.reddit.com/r/customhearthstone/comments/5x7us3/the_quest_itself_is_your_reward/ Our next card is Stand Against Dinosaurs by

AcidNoBravery.

This one's kind of cool because the reward is the same as the quest, and that's summoning

5 silver hand recruits!

This card is pretty sweet since it explores having a low requirement low payoff quest,

although it does have some awkward synergies with cards like stand against darkness, since

you can only have seven minions out at once.

This could have been fixed if it put a zero mana spell in your hand that summons five

silverhand recruits, but that kind of ruins the text formatting of the quest being its

own reward.

Either way the power level on this isn't great, but it's a super cool design.

https://www.reddit.com/r/customhearthstone/comments/61fcg5/priest_quest_silence_of_the_unicorns/ Up next it's Silence of the Unicorns by

msau92.

This quest requires you to have five friendly silenced minions on the battlefield at once,

with the reward being the purifier, a 5 mana one/one that literally makes you win the game

when you cast it.

Now in standard this seems way too hard to pull off, and

probably just isn't worth it, although people would definitely try.

In wild though, silence of the unicorns plus wailing soul would be insane, and you could

play a ton of card draw and then wisps and other free/cheap minions or tokens to try

to combo off as fast as possible.

Wild is a pretty fast format so maybe that wouldn't even be a good deck, but either

way this quest is awesome and would definitely be worth experimenting with if it was in standard.

https://www.reddit.com/r/customhearthstone/comments/60xzdw/sunwell_quest/ And finally it's Channel Energy by Hot_Local_Single.

This mage quest needs you to collect a total of ten unspent mana, so each time you pass

the turn with unused mana it gets added to the Channel Energy counter, and you have to

get up to ten unused mana.

The reward is the sunwell, a five mana spell that let's you have a max of fifteen mana

and makes your cards cost one less.

Now that might sound super broken, but not only do you have to pass the turn with unused

mana which is usually bad but you have to collect ten unused mana crystals!

This obviously can't be something you do in the early game, since your opponent is

developing his board and attacking you, so it's more something that just happens naturally

in the late game once you're out of cards to cast.

But if you're out of cards getting mana from the sunwell isn't good, and if you have

lots of cards you probably need to be casting them to not lose.

There could be some kind of freeze mage deck that just frost novas/blizzards every turn

and saves mana off that, and then otks with the sunwell, but it's questionable how good

that deck would be.

Still Channel Energy definitely explores some cool design space.

Those are

some cool fan made quests we've found, what would your design for quest be?

Let us know in the comments!

And it looks like that's gonna be it from me, if

you enjoyed the video drop a like, subscribe if you want, thanks for watching, and I'll

see you guys next time!

For more infomation >> Hearthstone - 5 Crazy Fan-Made Quests! - Duration: 8:52.

-------------------------------------------

Gta 5 Turismo R/Z-TYPE Down MT.Chiliad(turn subtitles on plz for text talk) - Duration: 3:40.

For more infomation >> Gta 5 Turismo R/Z-TYPE Down MT.Chiliad(turn subtitles on plz for text talk) - Duration: 3:40.

-------------------------------------------

Why Hollywood Can't Stand Will And Jada Pinkett Smith - Duration: 6:55.

Being a Hollywood super couple is no walk in the park, as double the power usually means

double the attention in Tinsel Town.

Will Smith and his outspoken other half Jada have gotten used to that over the course of

their 20-year marriage, though that doesn't mean they always know how to handle the heat

of the spotlight.

A series of public scandals combined with a period of professional decline has lead

to their stock dropping significantly in Hollywood, to the point that the community they were

once very much a vital part of has started to turn their back on them.

This is why Hollywood can't stand Will and Jada Pinkett Smith anymore.

High hopes

Fresh Prince of Bel Air's original Aunt Viv, actress Janet Hubert, has a long history of

feuding with the Smiths, and that came to a head in 2016 when she advised the couple,

via the Los Angeles Times,

"You're not kings and queens.

You're not royalty.

You're simply entertainers."

That's not how the Smiths always see it, however, especially Will.

Back in 2007 the Men In Black star told Daily Mail that his ambition was to be the first

black President in American history, saying,

"I'm going to be President of the United States.

I always wanted to be the first black president but Barack Obama stole my idea.

That's OK with me.

Barack can go first and then I'll take my turn."

"It's true, you know.

What can I do?"

"You did the right thing."

"I did the right thing."

Smith restarted the rumor mill towards the end of 2015 when he said,

"If people keep saying all the crazy kinds of stuff they've been saying on the news lately

about walls and Muslims, they're going to force me into the political arena."

It's certainly not unheard of for an entertainer to achieve political heights, but given some

of their other controversial connections and recent setbacks, it might be a tougher road

for Smith to travel.

​Oscar boycott backlash

When Will Smith didn't get a Best Actor nomination for 2015's Concussion despite the Oscar buzz

that surrounded the biographical football film, Jada announced her intention to boycott

the Oscars for the lack of diversity in nominees, and Will ultimately supported his wife's stance

in the press.

"I think that diversity is the American superpower."

While some rallied to the cause, like director Spike Lee, some of the Smiths' peers took

a different stance.

At the American Black Film Festival Awards, Jamie Foxx said that they needed to "hashtag

act better" if they expected to win awards, and even Oscar host Chris Rock took a swipe

at her in his opening monologue.

"Jada boycotting the Oscars is like me boycotting Rihanna's panties.

I wasn't invited."

In other words, if this was an effort to establish a political platform for the pair, it didn't

receive the kind of resounding praise they were probably hoping for.

Kooky kids

It's no secret that Will and Jada have raised their children to embrace their unique identities,

but when the two youngest, Willow and Jaden, spoke to T Magazine in 2014, it became very

clear just how eccentric these celeb children had become.

In the chat, Jaden revealed that his goal in life was to be "the most craziest of all

time," while Willow touted her ability to manipulate time, saying, "I mean, time for

me, I can make it go slow or fast, however I please, and that's how I know it doesn't

exist."

Because of this and other interview snippets, the kids have been consistently blasted for

being spoiled and self-centered by the press.

Their personal philosophies notwithstanding, Willow and Jaden's careers in music and acting

have become front and center of the Smith family's energy lately, and the two have had

mixed successes in both mediums.

Will and Jada's hands-off attitude towards their kids' oddball behaviors became troublesome

for the pair in in 2014 after a picture of their daughter in bed with a shirtless 20

year old man sparked a police investigation.

The Los Angeles Department of Children & Family Services were called to look into the snap

of the then 13 year old Willow, which was taken and posted online by actor Moises Arias

but removed shortly afterwards.

The Smiths cooperated with authorities over the investigation, but Jada took a different

approach when it came to the press.

She later said of the incident,

"Here's the deal: there was nothing sexual about that picture or that situation.

You guys are projecting your trash onto it, and you're acting like covert pedophiles,

and that's not cool."

Even so, such negative attention has certainly taken a toll on the family's public profile.

Controversial connections

As much as the general public enjoys poking fun at Scientology, the truth is that when

the religion first decided to base itself in California, it made studio execs uneasy.

The church had been offering acting classes for those looking to make it big in the business

for a long time, but their ambitions became clear in 2016 when they opened their very

own movie studio right on Sunset Boulevard.

While Will and Jada never confirmed that they were members, their dealings with Scientology

were exposed in tax records which highlighted a $1.2 million payment made to one of the

church's schools by the Smith's trust in 2010.

When the school closed down in 2013 the couple got all of their money back and have since

associated themselves with Christian and Baptist churches instead, but mud sticks in Tinsel

Town.

But that wasn't the last of their eyebrow-raising financial conflicts.

The Smiths' rep took another blow in 2015 when controversial leader of the Nation of

Islam, Louis Farrakhan revealed that the couple had donated $150,000 to help fund a rally

for the group, which had links to domestic terrorism.

The former Fresh Prince has spent his career strategically avoiding controversial roles

in order to minimize risk, but by associating himself with a controversial political group

he made it a little bit harder for Hollywood to keep on flogging his nice-guy schtick.

Which might be why audiences have become resistant to cough up for tickets to see either of them

Box office bluster

The days when Will Smith was considered a sure thing in Hollywood are now well and truly

behind us, with his 2016 Christmas turkey Collateral Beauty the final nail in his A-list

coffin.

The film's opening numbers were the lowest ever recorded by a wide-release Will Smith

vehicle, and studios began to see the pattern emerging as clearly as everybody else could.

Will had been through another nightmare just 12 months prior when his buzzy performance

in Concussion wasn't acknowledged by the Academy, nor did it turn a profit.

That followed on from the monumental flop that was After Earth, the 2013 sci-fi flick

starring Will alongside his son Jaden.

The would-be blockbuster cost $130 million to make and only managed to claw back $60

million in US receipts.

And Jada's projects don't fare much better either.

In fact, the most success Jada has had in her career to date is when the audience hasn't

been able to see her—voicing hippopotamus Gloria in the animated Madagascar franchise.

The only meaty role of any kind she has been able to sink her teeth into recently has been

in the realm of television, when she played Fish Mooney on Gotham.

In the end, no matter how brightly a Hollywood star shines, when they burn out, no one's

interested anymore.

Thanks for watching!

Click the Nicki Swift icon to subscribe to our YouTube channel.

Plus check out all this cool stuff we know you'll love, too!

For more infomation >> Why Hollywood Can't Stand Will And Jada Pinkett Smith - Duration: 6:55.

-------------------------------------------

HOW TO HACK APPNANA - NEW METHOD 2017 - UNLIMITED NANAS - Duration: 2:40.

Hey guys, it's iR3wards here!

Today I am going to show you the latest AppNana Hack!

This hack works on both iOS and Android Here is my account before the hack

As you can see, I only have 11,600 nanas The first step is to open your browser and

go to this link: bot.appnana.co Now when you're on this page, enter your invite

code and tap "Bot my code!"

Now simply complete this captcha to make sure you're not a bot

Success!

Now you can sit tight and wait for the bots to start flooding in

While we wait, you should take this opportunity to like the video

Also, it's in your best interests to subscribe to my channel so you get notified when a new

hack is out I am also doing a giveaway, so comment below

your email and the gift card you want!

I will randomly select 500 people to win a gift card!

Since I'm the only one using the service, the bots will come very quickly

Now let's open AppNana and check our nanas!

As you can see, it did actually work!

For more infomation >> HOW TO HACK APPNANA - NEW METHOD 2017 - UNLIMITED NANAS - Duration: 2:40.

-------------------------------------------

The Unwanted Awakening Denying Your Self & Your Love - Duration: 13:25.

The

Unwanted Awakening Denying Your Self & Your Love

By consciousreminder

Spiritual awakening is always a surprise. As many of you already know, I speak of awakening

as the spontaneous shift from unconsciousness to consciousness. But the light of awareness

doesn�t mean that we are free from all unconsciousness.

Instead, that light allows us to see unconsciousness. It allows us to have a perspective and discern

the difference between unconsciousness and consciousness that may have been totally invisible

before.

What Is a Spiritual Awakening?

For someone who has been spiritual and wanted some kind of revelation or enlightenment,

the arising of a spiritual awakening is a gift�most of the time. Because even with

these types (and I suppose I�m in this rather small group), awakening does not bring freedom

from pain. Freedom from suffering requires us to clean up our inner mess, and most people

I know upon awakening find a lot of dirty dishes in their inner home. That can be surprising

to the more naive spiritual people who think that spiritual awakening erases all problems

and pain once and for all. While the problem-maker (the ego) may start, START to dissolve, the

challenges of the world will remain. There is still hunger. There are still diseases.

The world is a challenging and often painful place, and a spiritual awakening doesn�t

change that. Rather, it helps you to see all of those challenges clearly along with all

the beautiful opportunities.

To the point of this post, many people who awaken are not spiritual, and some don�t

want to be. However, a spiritual wakening doesn�t care if someone is overtly on the

spiritual path or not because all of life is ultimately spiritual. Oftentimes, I get

emails from people who tell me that they�ve never been spiritual, never meditated, never

prayed, nor much of anything else. And then for whatever reason they awaken.

But some people don�t want the illusion to end. Some felt comfortable in their lifestyle,

and this awakening is very much an unwanted house guest. As such, they fight it tooth

and nail. Today, I want to talk a little bit about that fight, what is really being resisted,

and why this awakening is one of the greatest gifts you can ever receive.

The �Ah-ha� Moment Followed by the �Oh-no� Moment

Not everyone has a big ah-ha moment. Some spiritual awakenings are quite understated,

but there tends to be this shifting from one way of seeing the world to another. It�s

irrevocable, as far as I�ve seen and sensed. But as I said, that doesn�t clean up the

inner debris someone has. It simply illuminates it and often brings with it a kind of energetic

push to start mopping your soul�s floors.

But let�s pause and remember that most people don�t know about the gift that has arisen.

Most people are completely mired in the illusions presented by the world. Now let�s create

a scenario of someone awakening. Here is a 42-year old male in a comfortable corporate

job with a wife and two kids. He has a house with a mortgage. He has a boat. He goes golfing

with his buddies on the weekend, and he is content with life because this is what everyone

told him he should have and he got it. �Bravo,� he thinks to himself. �I did it.�

And then one night sitting in a lounge chair, he awakens. Something dissolves, and he sees

through to the truth. Maybe he gets a period of bliss. That could last for hours, days,

weeks, and even months. But at some point, the �oh-no� moment comes. That�s when

he realizes what is going to have to change and when he realizes all the pain and illusion

he�s been trapped in.

Avoiding the Big Inner Clean-up

When someone like the man above awakens and doesn�t want to give up his illusions, he�s

likely to go through a a lot of types of Self avoidance (Yes, that�s Self with the capital

�S� because his true Self is stepping forward). He may attempt to go on living his

current lifestyle, but the truth that his wife is a superficial, cheating tramp becomes

equally apparent as well as her innate shining beauty. His neglectful behavior with his kids

and how they�re developing into spoiled, contentious brats become obvious. The fact

that he absolutely loathes his job is undeniable, and he realizes that he doesn�t even like

playing golf. None of this is actually earth-shattering on the awakening seismic scale. These are

actually just fore-shocks of bigger realizations, but to someone like this, they�re life threatening

because he doesn�t want to change and is afraid of who he�d be if he started to change

and give up things.

So he keeps doing what he�s been doing. Life becomes a daily grind. During the initial

parts of a spiritual awakening, the energy in a lot of people tends to be very strong.

This makes him feel like he�s being torn in two pieces. He may be going through moments

that feel like panic attacks or a nervous breakdown. He wishes it would all go away.

For some people, it will. For others, their awakened Self is too strong for whatever reason.

He may start to lose energy and feel more and more exhausted. Different physiological

problems may begin to arise for which doctors can�t find any reason. For some people,

they completely crash and can no longer function in the world, and here we have someone in

a full blown dark night of the soul.

The Harder the Ego, the Darker the Night

Even for those of us who consciously embrace our awakenings, dark nights and long periods

of deep churning tend to come up. We have to go into all the dark corners of the soul

to know them, to love them. Through that love, that darkness is dissolved, and we become

integrated and whole.

In the scenario I�m painting, this type of individual isn�t doing any of that inner

work. So he�s subjected to the same fears again and again. They don�t process. They

just repeat. When he gets upset, he is wallowing in emotions such as self-hatred, self-pity,

fear or perhaps even terror, and others. This doesn�t process emotions. While I talk about

needing to feel to heal, we learn to notice what we are feeling and breathe into it mindfully

without feeding a story around the upset emotion. This person probably hasn�t found the tools

to do this (because he isn�t searching), and as such, all he wants to do is to get

through this awful time period. That�s another hallmark of the unwanted awakening�the person

just tries to get through it. S/he wants it to be over and done with to get on with her/his

regularly scheduled life. After a Spiritual Awakening Unleashes All Your Emotions.

And the good news is that nothing lasts forever. This intensity will pass. The bad news is

that this awakened awareness is one of the greatest gifts humans can ever receive, and

it�s tough to say if he�ll ever fully enjoy his old illusion and ignorance even

after this intensity is over knowing what he now knows.

Repercussions of Denied Self Love

At the root of awakening is love. It is self love and Self love. It is our union with our

human self and our innate divinity to which we all have access. From that space, we see

life with open eyes, open hearts, and easeful bodies. In this clarity, we see what is really

happening in us, in others, and in society. It makes us powerful change agents, teachers,

catalysts, leaders, and healers. Without clarity and when we�re still lost in ignorance and

pain, we spread more pain unconsciously. We also make ourselves suffer. Unconsciousness

is like walking on a broken foot when its numb; we continue to damage the foot because

we can�t feel it.

Today�s example persona, who probably thinks he�s just in a mid-life crisis or something,

will continue to suffer. In turn, he will continue to teach suffering through his example

and through his words to his partner and to his kids. Many of the ways he has suffered

will be passed on to the next generation, and more cycles of pain and suffering will

continue. He will not really understand love, how to express it, how to receive it, and

how to flow with it although if you asked this type of person, he�d tell you that

he absolutely does know what love it. That�s horrible truth of unconsciousness.

We don�t know that we don�t know. A spiritual awakening simply shows you what is. It helps

you to know yourself. In that self-awareness, you find love, and in loving yourself, you

more fully love and serve all those around you. That�s how we begin to break the cycles

of pain and suffering. Without love and open eyes, all of society will continue to struggle

through illusion, and suffering will be a mainstay in our collective human experience.

Giving up the Unconscious Ego

I wrote a post not too long ago called, �Giving Up Something You Don�t Want to Give Up.�

For many people this crossroads comes later in their spiritual shifts, especially for

those who actively follow the spiritual path. For anyone like this fellow, you have to do

this letting go now. It�s the only way to continue further on your journey and to begin

to heal.

And make no mistake about it; we all need to heal�A LOT. Healing is a natural part

of life and the spiritual process. It doesn�t mean you�re bad or have done anything wrong

(although if the latter is true for you, then healing requires penance). It is simply the

fact that we have become magnets for pain. We hold onto pain, hide pain, avoid pain,

and so on so that it festers and worsens within us. Lancing the wound is often a messy and

uncomfortable process, but it is such an important one to come back to health.

Spirituality Blogs About Healing

Coming back to health is often one of the first steps after awakening. The more profound

and deeper growth in our life tends to be reserved until we have created a clear space

in our gardens for seeds to grow. That means cleaning up the trash, debris, weeds, and

old roots so that there is room for new tender shouts to sprout. If we do that and let go

of lots of unconscious illusion and pain, a renewed life can be born in this world.

The Gift of Spiritual Rebirth

I know that many of you did not ask for a spiritual awakening, but it is here. It is

always here actually. For whatever reason for you, the clouds parted in your inner sky,

and you saw the truth. That truth stayed. How could it not? It could never leave anyway.

It could only be forgotten.

Once that opening arises inside, a great surge of you�yes you!�starts to move on its

own. All I can say is to trust that surge. Trust that inner flow. Your old life will

very likely be demolished, but space is being made for more love and more kindness. Denying

awakening is denying yourself, who you really are, and the depth of your love and truth.

It is denying reality.

If the man in my example today embraced awakening, he would be making space to be a better father,

to be a kinder husband, to potentially find a kinder partner, and to go find a job he

loves. He will not understand just how truly miserable he is in his illusion until he has

let go of these old ways of living. And when he does, he will probably wonder how he could

ever have not wanted a spiritual awakening.

For more infomation >> The Unwanted Awakening Denying Your Self & Your Love - Duration: 13:25.

-------------------------------------------

OUTRO ! - Duration: 0:13.

For more infomation >> OUTRO ! - Duration: 0:13.

-------------------------------------------

The Greatest Show On Turf/Earth (Starring: The St. Louis Rams) (pt. 3) - Duration: 15:03.

For more infomation >> The Greatest Show On Turf/Earth (Starring: The St. Louis Rams) (pt. 3) - Duration: 15:03.

-------------------------------------------

The Greatest Show On Turf/Earth (Starring: The St. Louis Rams) (pt. 4 - Duration: 13:06.

For more infomation >> The Greatest Show On Turf/Earth (Starring: The St. Louis Rams) (pt. 4 - Duration: 13:06.

-------------------------------------------

How Do Flowers Know When to Bloom? - Duration: 2:33.

It's spring here in the northern hemisphere, which means there are colorful flowers bursting out everywhere—

tulips and daffodils and crocuses, you name it.

Oh! You! You're back!

But for a long time, botanists have been trying to figure out exactly what's going on inside

the plants while this is happening.

Because plants don't have calendars. How do they know when it's time to bloom?

Well, it turns out the answer involves a lot more than April showers.

Now, scientists have known for a long while that plants respond to things like daylight and temperature,

and somehow that stimulates flowering.

They weren't sure how this process worked,

but they thought it might involve some kind of hormone that traveled from the leaves to

the shoots to get things going.

They called this hypothetical hormone "florigen."

Recently, though, researchers have been able to put together the puzzle of

gene activation and deactivation that actually makes it all happen.

And it turns out that there are thousands of genes involved in the timing and production of flowers.

Plants' leaves are like tiny chemical factories,

and changes in temperature and the length of the day affect which molecules the active genes pump out.

One of these molecules is a special type of RNA,

the stuff in cells that helps make proteins from genes.

This messenger RNA turns out to be the reality behind the mysterious "florigen."

It travels from the leaves to the plant's meristems,

the spots at the tips of the shoots where new growth happens.

There, it relays the message to important "master" genes with names like

LEAFY and Apetala1: spring is here!

These genes tell the meristem to stop producing leaves and start making flowers instead,

getting the plant ready to reproduce.

Despite these advances, though, a new factor is messing up plants' sense of time: climate change.

As temperatures warm up earlier in the year, plants in some areas are flowering sooner and sooner.

This can throw plants out of sync with the pollinators they need to reproduce,

and with the animals that depend on them for food.

So the next time you stop and sniff a rose, remember:

there is more to a flower than just beauty.

It's the product of literally thousands of genes switching on and off,

and passing messages from one part of the plant to another, all working together

to grow a sex organ.

Thanks to two of our patreon patrons for asking this question, and thank you to all of our patrons,

who keep these answers coming.

If you'd like to submit a question to be answered, you can go to patreon.com/scishow.

And don't forget to go to youtube.com/scishow and subscribe!

For more infomation >> How Do Flowers Know When to Bloom? - Duration: 2:33.

-------------------------------------------

How to Fight Hasbro! - Content ID Claim Guide - #WTFU - Duration: 6:15.

In this video, we're going to address a very popular and fun topic.

Copyright on YouTube!

This video can apply to non-bronies, but we'll be specifically discussing Hasbro's role

for the moment.

First of all, some very important disclaimers.

I am not a lawyer.

Any action you take is at your own risk.

If in doubt, get a lawyer.

Don't just listen to some random guy on the internet.

Okay, so, you uploaded a pony video and it either got claimed or blocked by Hasbro.

What do you do now?

Step one: Determine if your video uses copyrighted content in a manner which is Fair Use.

You should have done this long before uploading.

This is something you need to research on your own in order to make an informed decision,

but typically a fair use of copyrighted content is one that can't serve as a replacement

for the original work, isn't automatically claimed due to its length, and is either a

criticism, commentary, or parody.

Did you upload a 20 minute long reaction video with your webcam in the corner of an episode?

This is probably NOT a Fair Use.

Is that reaction video heavily edited with cutaways, and only uses enough footage to

make a point?

This probably IS a Fair Use.

Uploading footage without criticism or commentary is a perfectly acceptable situation where

your video might get claimed by Hasbro.

All this means is that ads will be put on the video for their profit.

Usually they prefer to do this instead of blocking videos because it earns them money.

It's a win-win situation, and you should not be upset about a harmless claim on content

which belongs to them in the first place.

However, today we're talking about claims and blocks on videos which should be considered

Fair Use, like reviews, PMVs, analysis, parodies, and alike.

Okay, let's say you did your research and determined your video is a fair use of copyrighted

content and shouldn't be claimed or blocked.

What now?

Step two: Dispute.

Disputing is very easy, and there's virtually no risk involved.

The only problem with the dispute process is that most claimants, including Hasbro,

have no reason to accept your dispute.

That's right, the decision is made by the claimant.

Not YouTube.

Do not be surprised when it is rejected, and do not assume you are in the wrong just because of it.

I've seen disputes rejected when the content in question didn't even exist in the video,

so this entire step is pretty redundant thanks to Content ID abusers.

Step three: Appeal.

Once your dispute is rejected, you have the option to appeal.

Things get a little more serious here because you are required to provide your full contact information.

If you fail to provide accurate information, YouTube may shut down your case before it

ever even reaches Hasbro.

Once you fill out your contact info, YouTube will ask for some more information as to why

you believe your video falls under Fair Use.

I can't tell you exactly what to write here, because if you don't already have some idea,

then you probably don't have a good enough understanding of Fair Use and need to do some

more research.

Here's a quick overview though.

Again, I am not a lawyer, and you should probably take this information with a grain of salt.

The purpose and character of use refers to what type of video you've made in the first place.

How is it different from the copyrighted work?

Are you a company or an individual?

Is your video transformative or derivative?

If you're not monetizing, that will help your case although it's not necessarily

a requirement.

The nature of the copyrighted work should be an easy one.

My Little Pony is a widely-available show and like any other piece of popular media

it's commonly reviewed and parodied.

The amount and substantiality of the portion used.

Did you use as little of the copyrighted work as possible?

Was it altered enough to be considered new and different?

The effect of the use upon the potential market for, or value of, the original work.

This one's also deceptively simple.

Is anyone going to watch your video instead of buying a copy of the original?

Can Hasbro be harmed in any way due to your use of the copyrighted work?

Will your video do anything other than provide free promotion for the show?

All of that might have been a lot to take in, but if you do your research you'll find

that each of these text fields really only need a couple lines of explanation.

There isn't much need to go too in detail on this form but it is very important to convey

to YouTube and Hasbro that you know what Fair Use is.

Step four: after your appeal is sent in, Hasbro will have 30 days to respond.

In my personal experience relating to this, they have always ignored my appeal and let

it expire.

This should be the end of your battle, and your video should be fully restored.

HOWEVER, And this is quite important:

There is a chance that the claimant, Hasbro here, will issue a formal takedown notice.

Receiving a DMCA takedown notice is a rather serious affair.

If this unlikely event occurs, and you're sure you're in the right, then you do have

one more option.

Step five: file a counter-notification.

Either they leave you alone, your video is restored, your strike is removed, and all

is well again.

OR…

You get sued, and have to go to court where you'll likely end up spending hundreds of

thousands of dollars in legal fees.

It's the ultimate ultimatum, and to many it's not worth the risk.

However, and I could be wrong, but I do not believe this has ever happened to a brony.

This is such a rare occurrence that even when it does happens to people involving the use

of music from a large label it usually makes the news.

Sure, Hasbro sends out Cease and Desist letters all the time, but if you're doing something

deserving of that they're not going to bother claiming your video first.

So in closing, stand up for yourself!

Content ID abuse is rampant on YouTube.

If you do your research, and are sure you're in the right, you should not hesitate to dispute,

appeal, and maybe even counter-notify to defend your videos.

Thankfully, even with all the complaints lodged against YouTube, we really do have the high

ground in most situations.

The dispute process does work, it's just that most people are too intimidated to use it.

One look at the appeal form and most people would be scared away; I know I used to be.

Everything from the redundant dispute step, to the needless red tape form-filling is designed

to make this as inconvenient and scary as possible for you.

There exist entire companies which do nothing but take advantage of this system.

As much trouble as Hasbro is to the brony fandom on YouTube, they're not even close

to being the worst offenders.

And that is why I hope this video will inspire some of you to take a stand and fight.

Not just for your videos, not just the brony fandom, but for all of YouTube.

Check out my "Where's The Fair Use" video if you'd like to hear more about this

growing problem.

I hope to see you next time, and stay tuned for your regularly scheduled pony videos!

For more infomation >> How to Fight Hasbro! - Content ID Claim Guide - #WTFU - Duration: 6:15.

-------------------------------------------

GAME CHANGER: Trey Gowdy Just Sent THIS Surprise Message to Donald Trump. Incredible. - Duration: 2:52.

Gowdy's presence in Congress would be greatly missed if he follows through with his plans.

Gowdy is a true conservative.

Members of the Trump administration reached out to Rep. Trey Gowdy asking if he was interested

in replacing James Comey as the new director of the FBI — and Gowdy said "Yes!"

(via Fit News)

Trey Gowdy has proven himself to be an extremely effective member of Congress, and a great

lawyer.

He has a clear passion for the rule of law and would stand as a beacon of credibility

in the FBI.

Trey Gowdy is not part of the swamp, unlike some of the other RINOs hiding within it.

Gowdy is one of eleven people on the short list to replace James Comey since he was ousted

earlier this week.

The Comey firing has caused the swamp to panic, and Gowdy should cause the deep state to panic.

Senator John Cornyn, former congressman Mike Rogers, Assistant Attorney General Alice Fisher,

New York Police Commissioner Ray Kelly, and acting Director of the FBI Andrew McCabe are

some of the others being considered for the job.

However, out of all of these very competent individuals, Trey Gowdy stands out as particularly

well-suited to the job.

Trey Gowdy has proven time and time again that he is a patriotic conservative willing

to uphold the law.

Gowdy was first elected to the House of Representatives in 2010 during the height of the Tea Party

movement, where he quickly rose to prominence.

He has since proven that he is a man of integrity and honesty.

Having served the people of South Carolina as a district attorney and federal prosecutor,

Gowdy knows how to handle an investigation.

He won't back down to threats from the radical Left and the deep state operatives infesting

the swamp.

Rep. Gowdy proved his great talent as an investigator when he was appointed to chair the 2012 committee

investigating the attack on an American embassy in Benghazi.

This investigation eventually lead to the discovery of Hillary Clinton's private email

server.

Gowdy has remained a staunch critic of Clinton since the investigation and he repeatedly

condemned her during the 2016 election.

Gowdy believed that Hillary Clinton should have been charged for her mishandling of classified

information.

Trey Gowdy would suffer none of the problem which plagued Comey, and would uphold the

law of the land without political concerns.

We should rally behind Trey Gowdy; he deserves our full support, and we know that he will

help our president drain the swamp.

The appointment of Gowdy would be a major step forward in draining the swamp, and Donald

Trump knows this.

As Americans, we should send Gowdy our support.

Do you think Gowdy will get the job?

Please share this news and tell us what you think!

For more infomation >> GAME CHANGER: Trey Gowdy Just Sent THIS Surprise Message to Donald Trump. Incredible. - Duration: 2:52.

-------------------------------------------

DIY metallic lipstick | Angiee Dee | Spanish subt. - Duration: 2:33.

For more infomation >> DIY metallic lipstick | Angiee Dee | Spanish subt. - Duration: 2:33.

-------------------------------------------

Slime with only 1 ingredient, No Borax Recipes, DIY 1 İngredient Slime - Duration: 2:40.

Slime with only 1 ingredient

Slime with only 1 ingredient

Slime with only 1 ingredient

For more infomation >> Slime with only 1 ingredient, No Borax Recipes, DIY 1 İngredient Slime - Duration: 2:40.

-------------------------------------------

A Small Barn House In Woodstock, Amazing Small House - Duration: 5:24.

A Small Barn House In Woodstock

For more infomation >> A Small Barn House In Woodstock, Amazing Small House - Duration: 5:24.

-------------------------------------------

Yuri on Ice!!! - Opening - V.F. - Parodie - Duration: 1:31.

For more infomation >> Yuri on Ice!!! - Opening - V.F. - Parodie - Duration: 1:31.

-------------------------------------------

ONE NIGHT WITH YOU Elvis Presley karaoke Playback instrumental wav edit by © Graziana '17 - Duration: 3:42.

For more infomation >> ONE NIGHT WITH YOU Elvis Presley karaoke Playback instrumental wav edit by © Graziana '17 - Duration: 3:42.

-------------------------------------------

Volkswagen Polo 1.2 TDI BlueMotion Comfortline - Duration: 0:57.

For more infomation >> Volkswagen Polo 1.2 TDI BlueMotion Comfortline - Duration: 0:57.

-------------------------------------------

Volkswagen Touareg 3.0 TDI BIEDEN BIEDEN - Duration: 0:59.

For more infomation >> Volkswagen Touareg 3.0 TDI BIEDEN BIEDEN - Duration: 0:59.

-------------------------------------------

SolidWorks Tutorial Indonesia #046 (Eng Sub) - SolidWorks Configuration 'Ratchet' - Duration: 8:22.

In this video, We will learning about "Part Configuration".

Welcome back at "One Future Solution" channel.

Thanks for watching this video !

In this video, We will learning about "Part Configuration".

Ok, We've been learned about "Configuration" at the previous video too.

And now, We will create a part configuration for this model.

So, We've been created this model in the SolidWorks Indonesia video tutorial series #22.

This model called as "Ratchet".

And, We want to create 4 configurations for this model.

The first configuration that We will create is this one, long "Ratchet" model without holes.

And the 2nd configuration is short "Ratchet" model without holes.

The 3rd, with holes and long.

The 4th, with holes but it's short.

So, We will create these 4 configurations model.

Ok, let's begin !

We can open our SolidWorks first !

After that, We can open the "Ratchet" model from the video #22 !

"Open" !

We can click this "Ratchet" part file !

"Open" !

As same as with the previous video, Configuration is used for creating some similar model from one part file.

So, It's not necessary to creating a new part,

We just need to adjusting some dimensions or features that already created in this model.

Ok, Let's start !

To add a configuration, We can go to this "Configuration Manager" tab (click) !

And there's already contain 1 model configuration "Default".

To create a new configuration, We can right click at this area !

"Add Configuration" !

Then, We can named this configuration as "Forged Long", like this !

And We can check the "Use in bill of material" option !

And for this one, We can change this option from "Document Name" become "Configuration Name" !

So, for model name that will be showed in the 2D drawing is this "Forged Long" as its configuration name.

So, not shown its document name "Ratchet", but using this configuration name.

Then, for the "Advanced option", let the settings sets by default with this "Suppressed feature" was checked !

Then, We can click "Ok" !

So, right now We already get a new configuration called as "Forged Long".

And to activate this "Default" configuration, We can double click at its name !

If the configuration was active, it will showing an green check mark beside it,

and if it was non active it will colored in grey like this.

And now, We can activate the "Forged Long", double click !

After that, We can back to the "Feature Manager Design Tree" tab !

As We can see here, it is the features that used for creating this "Ratchet" model.

We can right click at the "CutExtrude1" feature as the holes feature !

Then, We can click "Parent/Child" right here !

So right here, We want to check features relations that related with this "CutExtrude1" as the main hole feature.

So, the "CutExtrude1" parent features is, "Sketch4, BossExtrude1 & BossExtrude3".

So, if one of that parent features was not exist, so the "CutExtrude1" feature cannot be created.

And then for the "Children" features from this "CutExtrude1" is "Sketch5 & CutExtrude2".

So, if the "CutExtrude1" doesn't exist, so these children features cannot be created.

Then, We can "Close" !

Nah, now We can try to deactivate (suppress) this "CutExtrude1" feature !

Right click the "CutExtrude1" !

"Suppress" !

Ok, it was non active right now.

But right here the "CutExtrude2 & CutExtrude3" is automatically suppressed (not active) too.

Why they was "suppressed" too ?

Because they are the "children" features of "CutExtrude1".

As We've checked in the "Parent/Child" before,

This "CutExtrude2" & "CutExtrude3" is the "children" features of the "CutExtrude1" feature.

So, if the "CutExturde1" as their parents has been "suppressed" (deactivated),

it's automatically the children features will "suppressed" too.

And it's different if We try to activate (unsuppress) this "CutExtrude3" feature.

Right click at the "CutExtrude3" !

"Unsuppress" !

Nah, When We activate the "CutExtrude3" which act as the children feature,

So, the parent feature (CutExtrude1) automatically activated (unsuppressed) too.

We can suppress the "CutExtrude1" feature again !

Right click the "CutExtrude1" !

"Suppress" (deactivate), like this !

Ok, now this model has no holes anymore. So We already get the first model configuration "Forged Long".

Then, We can get back to this "Configuration Manager" again !

Then, We can copy this "Forged Long" configuration !

Click the "Forged Long" !

Then press "CTRL+C" !

Then, We can click outside the area like this, click !

We can paste by pressing "CTRL+V" !

Ok, so like this. It has copied this configuration.

Then, We can double click this copy result !

Then, We can right click on it !

"Properties" !

Then, We can change the name to be "Forged Short" !

So, right now We want create the shorter model configuration.

Then We can delete this unusable text name !

Then, clear the "Description" field also !

After that, We can check the "Use in bill of material" option right here !

Then, We want use the "Configuration Name" option right here !

Then, We can click "Ok" !

Then, We want go back to this "Feature Manager Design Tree" to adjusting the model !

And now, We want to make the length of this handle to be more shorter.

So, We can click this surface to showing its length dimension, click !

Or, if it didn't show any dimensions, You can use double click until it was showing its dimensions, like this !

And as We can see here, the dimension that represent the overall length is this "220" dimension.

So, We can make this "220" dimension to be more shorter as We want.

Now, We can double click at this "220" !

Make sure it was showing a "Modify" dialog box like this !

Then, We should to make sure We just change this "220" dimension just for this "Forged Short" configuration only,

just for this active configuration.

To do that, We should change the configuration options over here !

We can click this small arrow icon ! Then click the "This Configuration" option !

So, the changes that We did for this dimension, just applied for this configuration "Forged Short".

Then, We can input the dimension value !

We can input "180" for the dimension value, like this !

After that, We can click "Ok" !

Nah, the model does not changed yet.

Remember, We need to click "Rebuild" to update the model changes.

We can click "Rebuild" right here, or press "CTRL+B" !

Ok, so it was already more shorter now.

Then, We can go back to the "Configuration Manager" tab !

And now, We already got 3 configurations, "Default, Forged Long & Forged Short".

Then, We want to create a new configuration with holes.

We can click this "Forged Short" configuration !

Then, press "CTRL+C" to copy !

Then, We can press "CTRL+V" !

Now, We can right click at this new configuration !

"Properties" !

We can change the name become "Machined Short" !

"Machined Short" !

Like this !

Then, clear the "Description" field !

"Use in bill of material" !

Then choose "Configuration Name" option !

Ok, like this !

Then, We can click "Ok" !

And now, We can activate the "Machined Short" configuration !

Double click until the green check mark was active !

After this "Machined Short" has active, We can go to the "Feature Manager Design Tree" tab !

Now, We want to activating "unsuppress" these 3 feature, that created the hole geometry.

We can right click at this "CutExtrude3" feature that represents the "Children" feature !

"Unsuppress" !

Nah, this model already has its holes again.

And then, We can go to this "Configuration Manager" again !

Now, We want to create a new configuration for the "Machined Long".

Because the "Machined Long" geometry will be same with the geometry in the "Default" configuration,

We can double click the "Default" first !

Because it will have the same model with this, We can copy this "Default" for the "Mahined Long" !

We can click "Default" !

"CTRL+C" !

"CTRL+V" !

Then, We can right click at the copied result !

"Properties" !

We can change the name become "Machined Long" !

Then, We can clear the "Description" field !

Check the "Use in bill of materials" option !

Use the "Configuration Name" option !

After that, We can click "Ok" !

Ok, so right here We already get 4 configurations as We want.

We can double click the "Forged Long" !

So, this is the "Forged Long" model.

Then, double click the "Forged Short" !

It was shorter.

"Machined Long" !

It is long but with holes.

And the "Machined Short" !

It is short but with holes too.

So, right here We already created 4 configurations for our "Ratchet" model.

Now, We can save this model !

"CTRL+S" !

Ok, I think it's enough for the lessons in this video.

If you have any questions or comments,

or you want to sharing any knowledges, please kindly to type at the comments field below !

Thank You !

Ok, thanks for watching this video.

And if you think this video could be benefits for you or for your friends,

thanks for shared this video !

and thanks for subscribing the "One Future Solution" channel !

And see you in the next video ! :)

For more infomation >> SolidWorks Tutorial Indonesia #046 (Eng Sub) - SolidWorks Configuration 'Ratchet' - Duration: 8:22.

-------------------------------------------

SolidWorks Tutorial Indonesia #045 (Eng Sub) - SolidWorks Part Configuration 'Ring' - Duration: 16:32.

Right here, We will learning about "How to create a part configuration".

Welcome back at "One Future Solution".

Thanks for watching this video !

I'm Ridwan,

in this video We will learning about How to create a part configuration.

We will create a configuration for this "Ring".

We've been created this "Ring" model in the SolidWorks Tutorial Video Series #25.

So, you shall watch video #25 to creating a ring like this.

And in this video, We will create a configuration from this Ring model.

So, We can open our SolidWorks first !

Then, open the "Ring" part file !

"Open" !

We can open this "Ring" !

"Open" !

Nah, right here We already have a model like this.

Now, We will creating a configuration for this Ring model.

So, what is the "Configuration" ?

Configuration is for creating a similar model, or to configure the main model like this.

As We can see here, our main model is Ring.

Right here, We want to create another similar Ring, but have an minor differences with this main model.

So, We can use the configuration for creating a model that have a minor differences with the main model.

We can go to this tab !

So right here, there's a "Feature Manager Design Tree" that contain an model creation process features.

And there's "Property Manager" for inputting some command.

And there's "Configuration Manager" tab over here.

So, We can open this 3rd tab "Configuration Manager" !

As We can see, there's a configuration that already listed, "Default".

And right now We will creating a new configurations for this Ring model.

So, We will create some Ring which have different size.

And by using this "Configuration", We don't need to create a new part to create do that.

And also We didn't need to create a sketch like this anymore.

So, We can use this model including its sketches, We need to adjusting its dimensions only.

So, it will be more faster & easier for creating a similar models like this.

We can go to the "Configuration Manager" tab !

Nah, so how to creating a new configuration here ?

For creating a new configuration, We can right click in this configuration column area.

But make sure there's no items selected or all of items in free/clear condition !

Not in the selected condition like this.

So, make sure it was free/clear !

We can set them free by pressing "ESC" !

So, make sure it was free/clear !

Then, right click at the "Configuration Manager" area like this !

"Add Configuration" !

Nah, at this stage We can adding a new configuration.

For the "Configuration Name" field, We can input "Ring ID 6" (Ring with inner diameter 6 mm) !

Then for the "Description", click ! And input "Ring" !

Then, We can checking this "Use in bill of materials" option !

So when We checked this option,

for the new configuration that We've created,

it will be added to the part list (bom) in our 2d drawing of this model.

Then, We can go to this "Bill of Material Options" field !

It was showing a "Document Name" option over here.

That's mean if We use this configuration in the drawing,

It will showing this model file name "Ring" as the model name in the drawing.

And if in the drawing We want to use the configuration name as the model name, not the file name like this,

We can change the "Document Name" option becoming "Configuration Name" like this !

So, it will showing the "Ring ID 6" as this model name in the drawing.

And if We want to use the "User Specified Name" option, click this field !

So, We also can define a specific name for this configuration model for the model name in drawing.

So, if We didn't want to use file name or configuration name for the drawing, We can use this option.

But in this case We will use this "Configuration Name" option !

So this model will using this configuration name as its name in the drawing.

Then, We can drag this bar to the bottom !

We can check this "Suppressed feature" setting !

We will discuss later for this settings.

Just check it first, then We can click "Ok" !

After We click "Ok" there's a new configuration that listed here.

"Ring ID 6".

As that We inputted.

And for this "Default", it was in grey color, that means it was not active for now.

Meanwhile for the active configuration. it have a green check icon like this, and grey for the non active.

Then, how to activate the configuration ?

Just double click the configuration that have grey color like this !

Nah, it's already have a green "check" icon.

And for the "Ring ID 6" configuration, it was shown with grey color, that's mean its was non active for now.

So, to activating just double click the configuration that We want to use, like this !

And then, what will we do for this new "Ring ID 6" configuration ?

We want to adjust some dimensions that contain in this model.

As same as with the few previous video, We can go to this "Feature Manager Design Tree" tab !

Before that, activate this "Ring ID 6" configuration first !

Then, go to this "Feature Manager Design Tree" !

Then, We can right click at the "BossExtrude1" feature !

"Edit Sketch" !

Nah, the dimensions that used in this sketch was already shown.

Right here, We want to adjust this sketch dimensions for the "Ring ID 6" configuration.

So, We want to change this inner diameter dimension to be "6".

We can double click this "12" dimension !

Double click that dimension until its showing this "Modify" dialog box !

Commonly to change the dimension value, We just need to input the new dimension value "6" directly in this field.

But, When We are using "Configuration Manager",

We can make sure this "12" dimension that We want to change,

We want to apply its change to which configuration.

We can check the configuration option right here !

Click this small arrow (pull down menu) !

For the active configuration "This Configurations" or for the specified configuration "Specify Configurations".

Nah, because We already activating the "Ring ID 6" configuration,

So, We can use "This Configurations" option !

This is to make our change that We did for this "12" dimension, will applied for this active configuration only.

Meanwhile for the other configurations (inactive configurations) still using "12" or old dimension value.

Ok, then change this value to "6" !

Make sure We are using "This Configurations" option right here !

And then, We can click "Ok" !

Nah, it's already changed into "6".

And then, We can change this "17,8" dimension, double click !

Make sure We are double click at the value (the number) until it was showing this "Modify" dialog box !

Then, remember We need to change the configuration options, click this small arrow (pull down menu) !

We set this dimension changes for the active configuration only, click "This Configurations" option !

We will change this outer diameter dimension becoming "12" !

"Enter" !

Ok, then We can press "ESC" !

Ok, after We changed these dimensions, We can exit from this sketching position, click "Exit Edit Sketch" !

Nah, for this "Ring ID 6" configuration change besides change the inner and outer diameter dimensions,

We want to change the thickness of this "Ring" also.

As We already known, this "Ring" thickness value was resulted by this "ExtrudedBoss1" feature,

So, We can click this "BossExtrude1" feature !

Nah, as We can see here, it was showing the thickness value that resulted from "BossExtrude1" feature.

We can directly double click to this thickness dimension !

We can drag it first ! Click & hold, then drag !

Release !

Nah, We can directly double click this dimension that representing the thickness of this "Ring" !

We can double click at its number until it was showing a "Modify" dialog box, like this !

As same as with the previous steps, So We want to applied this changes for which configurations ?

We can click the small arrow icon over here !

Then select the "This Configurations" option !

So, We want to change this thickness value become "1 mm", type "1" then "Enter" !

Nah, as We can see here, these model was not change or update yet.

Remember, as same as with previous video, after We did some changes, We should to click this "Rebuild" icon !

We can click this "Rebuild" icon for updating the changes, click or press "CTRL+B" !

Nah, right now this model thickness was already changed became "1 mm".

Ok, as We can see here, We already get a model that appropriate with the changes that We wanted.

Then, We can go back to this "Configuration Manager" tab !

This is the "Ring ID 6" model.

Then, We can activate the "Default" configuration, double click !

Nah, it's still same with the previous model (before changes).

So, like that.

So, this "Configuration" settings was helping us when create a similar models.

So, We don't need to create a new part file, feature or sketch for creating a similar model.

We just need to adjust some dimensions or features that appropriate with our needs.

So, like that.

And then, We can rename this "Default" configuration name !

Click "Default" !

Then, click again !

Nah, We can rename it now !

Type "Ring ID 12" !

"Enter" !

"Ring ID 12".

Then, We can right click at "Ring ID 12" !

And click "Properties" !

We can click this "Description" field !

Leave the "Ring" text and delete the other text !

As same as with the previous, We can check this "Use in bill of materials" option !

Then, change the "Document Name" becoming "Configuration Name" !

So, We will use this configuration names in the drawing for this model.

Then, We can click "Ok" !

Right now, We already have 2 models, "Ring ID 12 & Ring ID 6".

Then, We want to add a new configuration "Ring ID 9", that having "9 mm" size for this inner diameter.

So, We can activate one of these configurations first that We want to duplicate for our new configurations !

Let's say, We can activate the "Ring ID 12" for the initial model shape of our new configuration, double click !

So, if We are activating the "Ring ID 12" before We create a new configuration,

So, the initial model shape references for our new configuration will following the configuration that active.

So, right here We want to create the "Ring ID 9" from the "Ring ID 12".

Before right clicking at this "Configuration Manager" area, make sure there's no items was selected !

Make sure there's no items that selected like this !

So, let them free first by clicking outside the area or press "ESC" !

Nah, We can add a new configuration right now, right click !

"Add Configuration" !

Input "Ring ID 9" for the "Configuration Name" !

Input "Ring" for the "Description" !

Then, check the "Use in bill of materials" option !

Change the "Document Name" option become "Configuration Name" !

"Suppresed features" !

"Ok" !

So, right here was already listed a new configuration "Ring ID 9".

Then, We just need to do some adjustments, go to this "Feature Manager Design Tree" first !

Then, We just need to changes some dimensions.

We can click this face to show its dimensions !

Then, We can double click at the "12" dimension (make sure double click at its number) !

Remember, We should to change this configuration option first !

"This Configurations" !

It was already using "This Configuration" option.

Then, input "9" !

"Enter" !

So, We just change this dimension value became "9" for the configuration that was active "This Configuration".

Then, for the outer diameter dimension, double click !

"15" !

Use "This Configuration" !

"Ok" !

And then, change this thickness become "1,1", double click !

Use "This Configuration" !

"1,1" !

"Enter" !

Then, We can press "ESC" to clear this selected face !

Nah, so right here We already changed all of the dimensions size, but this model was not changed yet.

Remember, We should to update this model after did some modification !

Click "Rebuild" or press "CTRL+B" !

Ok, so right now We already get the model for the "Ring ID 9" configuration.

But, in this "Ring ID 9" configuration, We didn't want to change the model dimensions only,

but also, We want to change a little bit this model shape by adding an "Chamfer" feature.

We can click the pull down menu (small arrow icon) below the "Fillet" feature !

We can click "Chamfer" !

We want to applying a chamfer for this Ring model.

Let's say input "0,3" for the chamfer value !

Then, which surface that We want to chamfer ?

This surface, click !

So, when We are selecting a surface for the chamfer, it will automatically read the outer edges of that surface.

Make sure We are using the chamfer settings like this, "0,3" ; "45" degree ; "Angle Distance" !

Then, click "Ok" !

So, We added a chamfer for this "Ring ID 9" configuration.

We can press "ESC" to clear any items that selected.

Ok, so what is the impact for the other "Ring ID" configurations ?

We can click this "Configuration Manager" tab !

We can activate the "Ring ID 6" configuration (double click) !

Nah, in this model the chamfer was disappear, are the Chamfer feature was deleted ?

No, the Chamfer feature wasn't deleted. That feature was inactive just for the other configurations.

We can check in the "Feature Manager Design Tree" tab, click !

Nah, this "Chamfer" feature colored in grey.

That's mean, the feature was inactive.

So, for the other configurations beside this "Ring ID 9" configuration,

Like in this "Ring ID 12" configuration, this Chamfer feature was inactive.

We can double click the "Ring ID 9" !

So, in SolidWorks We can make a feature to be non active.

We can go to this "Feature Manager Design Tree" tab first !

Then, We can click the feature that We want to make it non active, let's say this "Chamfer1" feature, right click !

Then, We can click "Suppress" !

We can click the "Suppress" icon over here to make it non active, click !

Nah, it don't delete that feature, just deactivating that feature.

It's different with "Delete", if We use "Delete", so that feature will be deleted.

That's mean the feature will be not listed at this design tree anymore.

So, We can't get back that "Chamfer1" feature in the future if We need it again.

If We just deactivate that feature, so if in the future We need that feature again, We just need to activate it.

So, like that.

And then, to activate this feature, We can right click at this "Chamfer1" feature !

Click "Unsuppress" over here !

So, just an opposites.

If You want to deactivate, just right click at the active feature !

Then, "Suppress" !

And if You want to activate, just right click at the inactive feature !

Then, click "Unsuppress" (which have similar icon with "Suppress" icon), click "Unsuppress" !

And now, We can get back at the "Configuration Manager" tab !

So right now, We already have these model configurations, "Ring ID 12", "Ring ID 6" & "Ring ID 9".

Then, We want to create a new configuration that called as "Ring ID 3".

We want create "Ring ID 3" configuration based on the model shape in the "Ring ID 6" configuration.

That's why We should to activate the "Ring ID 6" configuration first, double click !

Then, We can right click over here !

Click "Add Configuration" ! Before that, Make sure there's no items selected first !

"Add Configuration" !

Input "Ring ID 3" !

Input "Ring" for the "Description" !

"Use in bill of material" !

Change the "Document Name" into "Configuration Name" option !

Drag down !

So, that's it the function of "Suppressed feature".

So, when We creating a new configuration and adjust its features, it will not impacted to the other configurations.

Then, We can click "Ok" !

Nah, in this "Ring ID 3", We want to use the "Chamfer" feature too.

But wait, We can change and adjust its dimensions first.

Now, click or double click this surface to showing its dimensions !

After that, We can double click this "6" dimension (make sure We are double click at the number) !

Make sure We are using "This Configuration" option right here !

Then, input "3" and press "Enter" !

Then, double click this thickness dimension (1) !

Input "0,8" & make sure We change this dimension just for the active configuration "This Configuration" !

"Enter" !

And then for this outer diameter dimension, double click !

"This Configuration" !

"6" !

("Enter")!

Ok, now We can press "ESC" to clear this face selection !

So, why our model didn't change yet?

Remember, click the "Rebuild" icon or press "CTRL+B" !

Ok, so this is the "Ring ID 3" model.

Nah, in this "Ring ID 3" We want to use the "Chamfer" feature that used in the "Ring ID 9".

So, We can go to this "Feature Manager Design Tree" tab !

As We can see here, this "Chamfer1" feature was inactive.

And right now We are active in the "Ring ID 3" configuration.

Then, We can activate this "Chamfer1" feature for this "Ring ID 3" configuration.

Right click !

"Unsuppress" !

So, in this "Ring ID 3" configuration, it was using this "Chamfer1" feature too.

But, We don't want the chamfer size to be same with this one, We want it smaller.

So, We can click a face that represents the "Chamfer1" feature, click this face !

Nah, it was showing the chamfer dimensions right now.

Then, We can double click the dimensions that represent the size of this chamfer !

We can double click this "0,3" dimension !

Remember to change the configuration options for this dimension !

Click this small arrow !

"This Configuration" !

So, the changes just applied for the configuration that active right now (Ring ID 3).

Then type "0,1" !

"Enter" !

Why the model not changed ?

We can click the "Rebuild" icon for updating this model !

So, like this.

Then, We can go back to the "Configuration Manager" tab !

We can activate the "Ring ID 9" configuration !

So, like this.

Then, "Ring ID 6" !

So, like this.

"Ring ID 3" !

Then for the "Ring ID 12", double click !

So, like this.

Ok, so that's the functions of the "Configuration Manager" tab to configuring the model.

If You want to create some similar models,

without creating a new part or saving some similar parts independently,

We can use this "Configuration Manager" to make it more easier, quicker, and efficient.

So, We can save some configuration models only in one part file.

And to create some changes is to be more easy. So that's the functions of the "Configuration".

Ok, We can go to the "Feature Manager Design Tree" !

So, right here We already have 4 configuration models from this one "Ring" file with similar shape each other.

Now, We can press "CTRL+7" for "Isometric" !

Then, press "CTRL+S" for saving this model !

Ok, so in this video We already learned about how to add a new configurations,

what is a model configuration,

and how to use it,

and also about the benefits.

And I thinks It's enough for the lessons in this video.

And if you want to add some comments, or if you want to share any knowledges,

please kindly to type at the comment field below !

Thank you !

Ok, thanks for watching this video.

And if you think this video could be benefits for you or for your friends,

thanks for shared this video !

and thanks for subscribing the "One Future Solution" channel !

And see you in the next video ! :)

For more infomation >> SolidWorks Tutorial Indonesia #045 (Eng Sub) - SolidWorks Part Configuration 'Ring' - Duration: 16:32.

-------------------------------------------

SolidWorks Tutorial Indonesia #047 (Eng Sub) - Equation, Link Value, Configure Feature/Dimension - Duration: 19:03.

In this video, We will learning about "Link Value, Equation & Configure Feature".

Welcome back at the "One Future Solution" channel.

Thanks for watching this video !

In this video, We will learning about "Link Value, Equation & Configure Feature".

Ok, so to learning these 3 topics, We can use this part.

This part called as "Socket".

So, You can download this "Socket" part at the download link in the description field below !

Ok, let's begin !

We can open our SolidWorks first !

After You already download that file, We can open it !

"Socket.SLDPRT" !

So, We will use this part for learning the "Link Value, Configure Feature & Equation".

Ok, so what is the "Link Value, Equation & Configure Feature" ?

This is the definition.

We can start from the "Link Value".

Ok, so "Link Value" is used for creating some equations for several dimension

by adding a same name for all of dimensions that need to be equalized.

Then, We can try to use this "Link Value".

Ok, So We can start to use the "Link Value".

First, We can click this "6 Point" feature !

After We clicked that feature, these dimensions was automatically shown,

but if there's no dimensions appears We can double click that feature !

Then, We can double click this "11" dimension (at the number) !

We can change it to be "9" !

After that, press "Enter" !

Ok, so after We did some changes, We need to click "Rebuild" over here or press "CTRL+B" for updating !

Ok, so like this.

Then, show the previous dimensions again !

Click or double click this "6 Point" feature again !

After it was showing these dimensions again, We can right click at this dimension !

Right click at this "9" dimension !

Then, We can select this "Link Values", click !

So, right here We want to make this "9" dimension as the main references for the other dimensions.

So, We can adding the name for this dimension, please type "Dimensi Referensi" at this field !

After that, We can click "Ok" !

After We adding the "Link Value" for this dimension, it was showing an unlimited icon like this beside it.

Now, We can click outside the area !

Nah, after We've added the "Link Value", it has shown an "Equations" folder over here.

We can expand this folder, click this small arrow icon !

It was showing "Dimensi Referensi : 9" inside that folder.

So, for the "Link Value" and for the "Equation", all of them will be listed inside this "Equations" folder.

A folder that being above the "Material".

Then, after We determined the "9" dimension as the main "Link Value" reference,

then, We want change this "12 Point" feature dimensions,

double click this feature until it was showing its dimensions like this !

After this "11" dimension shown, We will make this dimension to be same with the previous dimension

that We defined as the main "Link Value" reference.

To do that, We can right click at this "11" dimension !

Then click the "Link Value" again !

Then, don't add a new name in this field, but We need to select the previous "Link Value" that We defined !

Click this small arrow !

We can select the "Dimensi Referensi" (click) !

After that, We can click "Ok" !

Then, click "Ok or Close Dialog" over here !

Nah, We can click "Rebuild" to update this model !

So, the dimensions of this "Sketch 3 (12 Point Feature) & Sketch 2 (6 Point Feature)",

all of them using this "Link Value" dimension (9).

So, if We change this "Link Value" reference dimension from "9" to "12",

it will changes all of these 2 sketch dimension also becoming "12".

Without change them one by one, We just need directly change this "Link Value" reference dimension.

And to change the "Link Value" value, We can click one of these 2 sketches "2 or 3", let's say click the "Sketch3" !

After this dimension that have link value was appeared, We can double click this dimension !

Then, We just need to input the dimension value, let's say "12" !

Then, press "Enter" !

Ok, and now We can click "Rebuild" to updating this model !

Nah, the model has changed.

As We known We change the "Link Value" dimension from this "Sketch3", now let's check the "Sketch2" !

Ok the link value dimension in the "Sketch2" has changed too became "12".

It's because We use the same "Link Value" reference for these "Sketch 2 & 3" dimensions.

So, We don't need to change these 2 dimensions one by one.

Then, We can double click this "Sketch2" dimension, this "12" dimension !

Change it back to "9" !

"Enter" !

Then update the changes, "Rebuild" !

Now, We can click this "Sketch3" !

Nah, this dimension has changed back became "9" because We using "Link Value" for these 2 dimensions.

Ok, so that's it the functions of "Link Value".

Now, We will try to using "Equation".

What is "Equation" ?

So, "Equations" used for creating an mathematical equations between several dimensions.

Ok, We can get back to our SolidWorks !

Then, We can try to create a new sketch on "Top Plane" !

Right click the "Top Plane" !

Click "Sketch" !

Then press "CTRL+8" for "Normal To" !

We can zoom out the view like this !

Then, We can create a "Center Rectangle" sketch, click !

"Center Rectangle" !

Click from this area !

to this area !

Then, press "ESC" to end the command !

Ok, so right now We already got a rectangle sketch geometry like this.

Previously, if We want to make this "Horizontal" & this "vertical" lines have a same length each other,

We can add an "Equal" sketch relation between these 2 sketch lines.

So, We can click this "Vertical" sketch line !

Press & hold "CTRL" !

Then, click this "Horizontal" sketch line !

Release the "CTRL" !

Nah, for those 2 items that We have selected We want to apply which relations for them ?

An "Equal" sketch relation.

So, We can click "Equal" !

"ESC" !

Ok, so these sketch lines has already same each other.

And when We dragging this sketch point, like this !

So, if the "Horizontal" lines was changed, the "Vertical" will following that changes and vice versa.

Release !

And now, how to create this "Horizontal" line have 2x longer than this "Vertical" line ?

So, this "Vertical" line will has just always 1/2 length than this "Horizontal" line, how?

We can do that using "Equation".

We can delete the "Equal" relation first from this line !

Click this "Vertical" line until it was showing this "Equal" relation icon like this !

Then, click this "Equal" relation icon (small box) !

Then press "Delete" !

Then, We can drag this sketch point, click & hold this point !

Nah, they are no longer in equal relations again, because We already deleted the "Equal" relations for them.

Then, release it !

Press "ESC" !

Press "ESC" again !

Then, We can add the "Smart Dimension" !

We can add "50" for this "Horizontal" line !

"Enter" !

After that, We can add a dimensions for this "Vertical" line, click !

"Click" !

Make sure it was showing this dialog box !

For adding an "Equation", We just need to input "=" before adding the dimension value.

Type "=" !

After We inputted this sign, we can input an equations that We want.

In this case, We want this "Vertical" line length to be 1/2 from this "Horizontal" line,

so We can input an equation like this, "1/2 *" !

Then click this "Horizontal" line dimension !

Don't input "50" manually, but click this dimensions to create a link, click this "50" dimension !

So, the equation that We use is "1/2 * (The horizontal line length (50))".

Then, after We inputted this equation, We can click "Ok" !

Then, press "ESC" to end the "Smart Dimension" command !

After We adding this equation, there's appears a "Sigma" icon before our dimension value.

This is the icon of "Equation".

So, We can't edit this "25" dimension manually again.

Because this dimension has been linked with this "Horizontal" line length dimension.

So, if We want to modify the size of this rectangle sketch,

Don't edit this "25" dimension !

But edit it from this "50" dimension !

Why ?

It's because dimension which controlling this rectangle sketch size is the "50" dimension for now.

And also its because We already added an "Equation" for this "25" dimension than this "50" dimension.

So, when We edit this "50" dimension, double click !

Then input "20" and press "Enter" !

Ok, so for this "Vertical" line dimension has already followed the change,

it's always 1/2 from this "Horizontal" dimension because our "Equation" that We've already defined.

Then, We can press "ESC" !

So, the dimension that We can modify is this "20" dimension,

the dimension which controlling (depending) and not containing any equations in it.

And for this dimension is dimensions that have been controlled by "Equation".

If this "20" dimension was modified, this "10" dimension will always follow that changes.

And after We adding any "Equation", all of them was listed in the "Equation Folder" over here.

We can right click at this "Equations" folder !

Then, click "Manage Equations" !

As We can see, at the "Global Variables" columns, there was listed our previous "Link Value - 9" also.

And then for the equation that We've been created is listed below this column, at the "Equation" field.

We can also change or modify and also delete this equations from this settings.

We can click at here !

"Delete" !

Nah, our equations was already deleted now, We can click "Ok" !

As We can see, this "10" dimension was already normal again.

And if We change this "20" dimension, double click !

Edit become "30" !

"Enter" !

So, this dimension is still at its own value, because there's no more equations that control that dimension.

Then, We can press "ESC" !

We can cancel for this sketch creation, click "Cancel" !

"Discard changes and exit" !

Ok, now We can press "CTRL+7" for "Isometric" !

And now, We want to add an equation for this outer diameter dimension of this shaft geometry.

First, We can showing the outer dimension of this shaft by double click this cylindrical surface !

Ok, so We want modify this "25" diameter dimension.

Now, We can double click this "25" dimension (make sure double click at its number), like this !

Then, We can adding a new equation,

Type " = " !

Then, go to this "Global Variables" !

Then, We can select our previous "Link Value" reference dimension, We can click this one !

So, for the equations is " (Link value dimension) + 6" (type "+ 6") !

Then, click "Ok" !

Then, We can update this model by clicking this "Rebuild" icon !

So, if we change this "Link Value" reference dimension, let's say We can click this "Sketch2" first !

After it was showing the dimension like this, We can double click this "9" link value dimension !

We can change it become "12" !

"Enter" !

Then, click "Rebuild" to update !

Ok, so the outer diameter will always "+ 6" from this "Link Value" reference dimensions because its equation.

So, that's the functions of "Equation".

Then, We can get back the "Link Value" reference dimension into "9" again,

We can click or double click this "Sketch2" to show its dimension !

After that, We can double click this "12" dimension !

Then, input "9" and press "Enter" !

Ok, We can "Exit Edit Sketch" !

Then, We can click "Rebuild" for updating the model, like this !

And now, We will adding a new equation for this model.

We can double click this cylindrical face first to showing its dimension !

As We can see here, the outer diameter value is "15".

So, "15" for the outer diameter, and there's chamfer feature right here.

We can click this chamfered face !

Ok, so this is the "Chamfer1" feature over here.

And if We click this surface, its have "15" diameter !

Right here, We want to adding an equation that,

if this "15" diameter changed become smaller like 10 or 5,

it will make this "Chamfer1" feature to be inactive or "Unsuppressed".

So, if this outer diameter is smaller than "15", this model will not using the "Chamfer1" feature.

But if this diameter is in "15" or bigger, the "Chamfer1" feature will be activated again.

And to do that, We can use "Equation".

And now, We can adding a new equation from this "Equation" folder, right click this "Equation" folder !

"Manage Equations" !

Then, We can go to this "Features" field, click !

After We click this field, and because We want to adjusting the "Chamfer1" feature,

We can click the "Chamfer1" feature right here !

After We clicked, it will automatically inputted here.

Then, We can input the equations now.

There's already "=",

Then, input "if" !

We can click this one !

So, "if" for what ?

We can move this dialog box first !

Ok, put at this area !

"if" the "15" dimension.

the "15" dimension is the dimension of this cylindrical face, so We can show that dimension first !

We can double click at the "Cylinder" feature or We can double click this cylindrical surface, like this !

Ok, after the "15" dimension has shown, We can go back at this field, click between these "(" & ")" icon !

Ok, so the equations is "if (...)", click this dimension !

"=If( "CylinderDiameter@Sketch1" )",

then, We can press space then input "<" icon !

"15" !

We can move this dialog box again to the bottom like this !

"= if( "CylinderDiameter@Sketch1" < 15...)".

"," !

So, it will be... .

We can go to this "Global Variables" !

Then, click "suppressed" !

So, it will deactivate this "Chamfer1" feature.

And if the opposites, input "," !

If it was bigger, so it will... Click "unsuppress" (active) !

And now, We already get the equation.

"Ok" !

After We clicked "Ok", it was showing an conclusion (evaluates to) of our equations now, "unsuppressed".

Nah, why the conclusion of that equations is "unsuppressed" ?

It's because We are using the "15" diameter for now.

So, because We are still in the "15" diameter, the "Chamfer1" feature were not deactivate (unsuppressed).

After that, We can click "Ok" !

And now, We can try to change this outer diameter.

We can click this surface until its dimension was shown !

And this "15" dimension was defined by our previous "9" Link Value dimension right here.

So, to edit this "15" dimension, We can edit the "9" dimension as the previous "Link Value".

We can click this "Sketch2" !

After this "9" Link value dimension has appeared, We can double click it !

We can change "9" into "14" !

"Enter" !

Then, click "Rebuild" to updating !

Nah, then We can click this surface !

The previous "15" dimension already has changed became "20".

So, this dimension is already bigger than "15" for now.

As We can see here, the "Chamfer1" feature still active.

Then, We can click again the "Sketch2" until it was showing its dimension !

Then, double click this "14" dimension !

We should to change it into smaller amount, from "9" to "7" !

"Enter" !

Then, click "Rebuild" !

Nah, as We can see here, the "Chamfer1" feature was automatically "suppressed" or deactivated.

Then, We can check its dimension by clicking this face !

Nah, the outer diameter dimension has changed became "13" (smaller than "15),

so it will automatically make the "Chamfer1" to be "suppressed".

And if We make it as the previous,

We can click the "Sketch2" !

Double click the "7" dimension !

Input "9" !

"Enter" !

"9".

Then, We can update this model "Rebuild" !

So, this "Chamfer1" feature was back or "unsuppressed".

It's because the outer diameter of this cylindrical face was back in "15".

Ok, so that's it the functions of "Equation".

And now, We will learning about "Configure Feature".

What is "Configure Feature" ?

So, the "Configure Feature/Dimension" will offering us a table that allow to adjusting the configuration easily.

Ok, We can get back to the SolidWorks.

So with this feature, We can create a new configuration also without go to this "Configuration Manager" tab.

We can click this tab first !

At this "Configuration Manager" area, there's no configuration listed beside the "Default".

And if We want to create a new configuration, We can right click at this area !

Then, We should to select "Add Configuration".

But now, We don't want to use this. We can click outside the area to hide this field !

So, We can let this configuration still "Default".

Then, We can go back to the "Feature Manager Design Tree" tab !

And now, We will use "Configure Feature" to create a new configuration.

So, We can create a "Configure Feature/Dimension" with,

Before that, We can click or double click this "Sketch2" to showing its dimension, like this !

Now, We can add the "Configure Feature" from here, We can right click at this dimension !

"Configure Dimension" !

Nah, after there's appears a dialog box like this,

then, We can click at this "Create a new configuration" field !

Ok, so right here, We are creating a new configuration, We can input "M5-6" for the name !

And then, for this "Dimensi Referensi" column for our new configurations, We can click this field !

It's was using the same dimension with the initial dimension value "9".

Then We can create a new configuration again, click this field !

Type "M6-6" for the name !

Then, click this field !

Then We can change this "9" dimension (double click), then block it and change it become "11" !

Then, We can click at this field again to create a new configuration !

Input "M8-6" as the configuration name !

Then, click this field !

Double click !

Block !

Type "14" !

So, We just use "9, 11 & 14" for the dimensions.

Then, We can click at this area to confirm this dimension value was inputted !

Ok, after We create some configurations that have various dimensions, now We will configure the features.

First, We can search the features that We want to configure !

We can click this "Feature Manager Design Tree" tab !

And the feature that We want to configure using this method is this "12 Point" feature, click !

Sorry, double click I mean !

After We double click that feature, it will automatically listed in this table.

So, for this "M5-6" configuration, what will we do for the "12 Point" feature ?

We want to deactivate that feature in this configuration.

So, We just need to checking "Suppress" option at this field, click !

And for the "M6-6 & M8-6" configurations, We want to deactivate that "12 Point" feature too.

Click !

Click !

Ok, so this "12 Point" feature just active in the "Default" configuration because this field was not checked for it.

And after We get the table for the configure dimensions & features like this,

We can named this table.

Click this field !

Then type "Fitur&Dim" for its name like this !

After We defined its name, We can save this table settings by clicking this "Save Table View" !

Ok, after We saved this table, We can click "Apply" !

After that, We can click "Ok" !

So right now, We already have a new configurations that We've been created before.

To check them, We can click at this "Configuration Manager" tab !

Ok, there's listed several configurations, "Default, M5-6, M6-6 & M8-6".

In this "M5-6", We defined the "Dimensi Referensi" same with the "Default", "9".

We can double click !

But, We can go to this "Feature Manager Design Tree" first !

But, this "12 Point" feature was suppressed or deactivated.

Meanwhile, We can back to the "Configuration Manager" tab !

Then, for the "M6-6" (double click to activate the configuration) !

And in this configuration, the "12 Point" feature also already suppressed or deactivated.

Then, for the "M8-6" !

For the "12 Point" feature has already suppressed or deactivated too for this configuration.

So, these dimensions was changed and "12 Point" feature has suppressed, meanwhile for the "Default",

"Configuration Manager" !

"Default", double click !

Then, go back at this tab !

Nah for this configuration, this "12 Point" feature was active.

Ok, so that's it the functions of "Configure Feature/Dimension".

So, to create a configuration or just configuring any dimensions or features that We want.

So, like that.

Ok, now We can save this model !

Press "CTRL+S" !

So, I think is enough for this video.

And if you want to give some comments or want to share any knowledges,

please kindly to type at the comment field below !

Thank You !

Ok, thanks for watching this video.

And if you think this video could be benefits for you or for your friends,

thanks for shared this video !

and thanks for subscribing the "One Future Solution" channel !

And see you in the next video ! :)

For more infomation >> SolidWorks Tutorial Indonesia #047 (Eng Sub) - Equation, Link Value, Configure Feature/Dimension - Duration: 19:03.

-------------------------------------------

উলঙ্গ গোসলের দৃশ্য দেখে সহ্য করতে না পেরে বোনকে জোর করে ধর্ষণ করে LIFE IN GAME - Duration: 7:11.

সহ্য করতে না পেরে বোনকে জোর করে ধর্ষণ করে