Hello everyone, here you have me faithful to the Thursday visit, today we are going to make some earrings
with pebbles and a central pearl, it has the facility of being made with only one naveta and now
go for it.
The materials that we will use are the following
a naveta, which I have loaded with thread lizbeth of number 20,
46 rockets of the number 0/11, as you see are very small,
A pearl or an 8-millimeter stone, a clip,
a crochet hook and scissors.
Let's start with our first ring for it
let's load our loom
with three rockets,
and then
let's do
5 knots
a tiny picot and 7 knots,
As you can see, this work has rockets on top
and below,
You see, here in the pattern, up
and below,
up and down,
So, that's why we've gotten
in our loom three stones, to put now
3 above,
Y
A
down,
Now we will continue working
our ring with seven knots, a tiny picot and five knots,
We have already made our first ring,
Now let's do the second, for this second ring we will load our loom with 10 seed beads,
we just count the one that's out here, and we're going to start doing 5 knots,
we will hook in the little picot, this here, here, and 2 knots,
We have made 5 knots and now what we are going to do is hook,
Now let's make the knots
1 and 2, we will place with a pebble on top
and a rockery down,
This is going to repeat it
as you see here, three times, all separated by a knot,
we have already done this bit and this knot here,
Now we are going to place four pebbles at the top,
1, 2, 3 and 4,
then we will make a knot,
Let's do it, so you can see how it is,
and we will start doing it again
this part of here, which is the same as this one here, we'll put
a perlite above, of those who are here in the loom, and another below, of those who are in the naveta,
Once we have finished this ring
we are going to put in this thread, in this way the perlite,
and we are going to put a clip,
here, so that the thread does not go away,
once we have gotten the pearlite,
we adjust the thread well and what we are going to do now is
catch the thread here behind,
and adjust it to the base of the ring,
putting the naveta here,
and we will stay like this.
We have made this ring which is the A and this which is the B,
Now let's do the C, it's exactly the same as the A, let's do 5 knots, we'll hook, 7 knots,
above we will put 3 pebbles and below one,
7 knots, one picot and 5 knots,
We have already made the rings A, B and C, now we are going to make the ring D, this ring has a different numbering,
we are going to make 5 knots, we will hook in the tiny picot of the next ring,
in this picot here,
seven knots, we'll put three pebbles up and one pebble down,
five knots, and we're going to make a bigger picot than these picot we're doing here, and then
10 knots
We have done
5 knots
7 knots and 5 knots,
now we are going to make this picot that I mentioned before, which is a little bit bigger
because it will help us to hook other rings,
approximately we are going to do it this way and now we will continue making the remaining 10 knots,
You see,
a little bit bigger,
Now let's make the E ring,
this ring is above
of D, that is, it will be above
of this ring,
then what we are going to do is
Perform the first 10 knots, and now I will come back again to say how to hook up so that it is above.
Once we have made the 10 knots we put the chain on top of the ring,
and we are going to hook this time from behind,
thus,
We adjusted and now we are going to continue knitting the other 10 knots of the second half of this ring,
we have made the E ring,
that as you can see is hooked in this picot a little bit bigger than we have done before,
Now let's make the F ring, which goes below the E, that is, would go
under this ring and
we would hook in the same picot where we have hooked
this one here,
in this picot that we made in this ring, the picot that was a little bit bigger, now to begin
let's do 10 knots,
we will put the chain behind and hook in this picot,
we made the first ten knots as I said here and now we are going to hook
in the picot here back,
always placing the chain under the ring, now we will adjust,
and we will continue making this ring and we would have to do five knots,
three balls up and one ball down, 5 knots, a bigger picot,
and 10 knots,
Now let's make the G ring,
This ring is the same as this one, let's make ten knots,
we will hook here,
From behind,
and 10 knots,
I have done in the first 10 knots of this ring, and now as I said before
we place the chain
front and
we hooked in the back,
this thread here,
we put the naveta,
and adjust, now we continue weaving the second part of the ring that would be another 10 knots.
Now let's make the H ring,
we are going to make 10 knots and we will hook in this picot that is,
in this picot
from here,
always keeping in mind that the chain goes by the back, and do not forget either
to load the balls,
remember that the balls that we have to put in the frame are always those that are outside,
those that remain inside
They are in the naveta.
I have made these 10 knots,
Now I'll put it in the back and hook in this picot here,
I will adjust,
and I will continue weaving the rest of the ring.
Once we have made this ring,
Now what we are going to do next is hook this thread
where we have put the clip, we will carefully remove the clip,
let's hook this thread,
without it escaping us clear, and we have hooked like this,
and now simply
we will adjust the thread
and we will continue
weaving as we have been doing, now I would play the I,
this ring would go
on top of this, we would do 10 knots,
we would hook here by the back, and then then
another 10 knots
Once we have made the small ring of 10 knots and 10 knots, this one that goes up here, now let's do the J,
this one goes
under,
we will make 10 knots,
we will hook in the picot from here back,
5 knots
we will put 3 balls up, one ball down, 5 knots, a big picot,
and 10 knots,
We have made the J ring, which corresponds to this one, now let's make another small K,
which, as we have done previously, goes on,
it would be 10 knots,
we would hook and 10 knots,
remember that to hook you have to do it from the back,
Now let's make our last ring which is the L, this ring will go below
of this last little one that we have made, we will make 10 knots and we will hook in the picot
5 knots
3 balls up, 1 ball down,
and 7 knots, when I got here I will come back to tell you how to finish and close the work.
Well we have worked the L ring, so far, now we are going to hook in the A, and then
We are going to continue knitting the last five knots until we finish our work, so first we are going to throw the naveta
towards here,
and we are going to hook
this thread
here,
thus,
we put the naveta
and we adjust,
and now below
this loop is going to happen
forward,
and we will continue weaving
our last five knots, which are these from here,
we have already closed the ring and I have cut the thread, as you see here
we have a separation,
so that this gap is not seen, because simply, what we are going to do is
here
let's put
this corporal,
let's adjust
and we're going to tie a knot in the back,
and we will have our earring
Completely finished, yes once we starch it.
And here we have our earrings, the boss will upload it soon
www todofrivolité.es / blog / I hope you liked it,
If so, give me a like and if you are enthusiastic about frivolity and you have not subscribed yet, you know subscribe,
You are only a click away from seeing and sharing cool things.
Remind you that I will start to give face-to-face courses in Madrid, the ones you are interested in
You can contact me at complementosartesanosvym@gmail.com
a kiss for all and see you in the next tutorial.
No comments:
Post a Comment