-------------------------------------------
Doctors Fear A Potentially Disease Outbreak In Puerto Rico/Hot news - Duration: 8:56.
you
ralina Puerto Rico Christian Romero sat in near darkness in the stairwell of his
apartment building the glare from his phone illuminated his face as he swiped
through photos of his late brother Romsey I feel like a part of me is
missing Romero 28 told HuffPost he spoke calmly
but his eyes bore the weight of countless sleepless nights he was older
than me by a year and three months we literally grew up together hand by hand
doing the same things going to the same places Romsey Romero died on October 5th
his brother says doctors told the family they suspect he was infected with
leptospirosis an animal born bacterial disease that can be fatal if not
properly treated in time in the four weeks after Hurricane Maria devastated
Puerto Rico leaving the island largely without power and with limited access to
drinking water doctors fear Ramsay's case is hardly
unique on Thursday Puerto Rico's state epidemiologist Carmen de Sena announced
there are 74 suspected leptospirosis cases reported in October the numbers
significantly surpassed its average of 60 reported cases a year for the disease
four of the suspected 74 cases resulted in death the Puerto Rican government
continues to assuage public fears as they await formal confirmation of deaths
related to the disease but doctors told HuffPost the u.s. territory is ripe for
an outbreak of leptospirosis and other endemic diseases on the island if more
aggressive preventive action isn't taken soon the potential for outbreak is
imminent leptospirosis is spread through the urine of infected animals including
rats pigs dogs and horses when a person comes into contact with water mud or
soil that has been contaminated by an infected animals urine the bacteria can
enter the body through open abrasions or mucous membranes in the eyes nose and
mouth according to the US Centers for Disease Control and Prevention
the current conditions in Puerto Rico are ripe for this type of infection
common symptoms include high fever headache chills fatigue and muscle aches
said clinical epidemiologist David capo who previously worked at the CDC's
National Center for Health Statistics and now serves as a consultant at Abarca
health in San Juan leptospirosis is rarely contagious between humans the
disease often mimics many viral infections making it hard to diagnose
Kapoor said it is often underreported or misdiagnosed as den a viral disease
transmitted via mosquitoes but unlike den leptospirosis can be treated early
on by using antibiotics if left untreated in some strains of the disease
patients may hemorrhage in the lungs or experience kidney failure and die Kapoor
said the government isn't responding quickly enough officials need to
communicate the risks of the disease to both patients and doctors on the island
I would say the island is at risk of outbreaks of influenza leptospirosis Dan
Kapoor said the potential for outbreak is imminent the suspicion is so great
that you don't need to wait for lab results a doctor at doctor federico
Drella Hospital in Carolina who spoke the HuffPost says he knows of at least
one death connected to leptospirosis and three current suspected cases being
treated there are cases that despite not being confirmed the suspicion is so
great that you don't need to wait for lab results said dr. Cruz whose name has
been changed because he did not have permission to speak on record there was
a patient a 28 year old man that in less than five days the disease killed him
doctor Cruz who received details of the case from a fellow doctor at the
hospital told HuffPost that the patient had gone to three different hospitals
before arriving a doctor Federico trilha Hospital around 13 miles east of San
Juan at each hospital he had been discharged with a virus diagnosis no
doctor had considered leptospirosis by the time the
patient arrived at dr. Cruz's Hospital he was experiencing organ failure
compounding the problem the hospital had no functioning intensive care unit due
to a lack of electricity despite the administering of antibiotics
and an attempted transfer to a hospital with a working intensive care unit in
San Juan it was too late in less than four hours of having been in our
hospital with suspected leptospirosis he died dr. Cruz said once it's too late
I'll be blunt the patient will die officials in the government say they are
working to prevent outbreaks Puerto Rican governor Ricardo Rosello told
HuffPost the deaths that are suspected to be linked to leptospirosis are
pending confirmation from the CDC when asked if the health system on the island
currently had the infrastructure to deal with a possible outbreak of any disease
Rosello admitted that the hospital system is
very frail with only 20 hospitals running on the electric grid and the
rest running only partially on generators as far as preventive measures
for outbreaks Rosello assured HuffPost that his government was doing an
aggressive campaign with flyers but dr. Cruz says he hasn't heard of any
campaigns and he feels the government should not be waiting for CDC
confirmation of leptospirosis deaths before alerting communities of the risks
we have all of the elements for that bacteria to grow and spread and with
preventative antibiotics we can save lives dr cruz added because once it's
too late I'll be blunt the patient will die regardless of what we do and it's up
to a 70% mortality rate if the infection reaches the lungs we never imagined that
he would die as the coqui frogs began to sing in the background
Christiane Romero described the circumstances of his brother's death
Romero suspects his brother contracted the disease when he washed his clothes
in a nearby river without running water or electricity there was nowhere else to
Romsey was always a strong man an athlete a baseball player said Romero
who works as counselor for patients who suffer from substance abuse he was a
regular person that felt sick and looked like he had a virus
everybody recovers from that one or two days passed by and you get back to
normal at the health center the doctors told Romero and his family what
leptospirosis was that it was very dangerous
he added that's why we took him to the hospital we never imagined that he would
die Romero said his brother who lived in Guaynabo lost 15 pounds in the days that
the disease progressed something that was devastating for his family to
witness after having known him as a fit and healthy man
he also said he hoped his brother who was the father to a seven year old girl
will be remembered for how much he loved to help people the days after the
hurricane he would help his neighbors clean their water cisterns Romero said I
remember him checking on people whose homes were flooded
unclogging culverts so that people would be okay before his death
one of Ramsey's goals had been to join the US Army Romero said the decision was
motivated by the economic situation in Puerto Rico and because he wanted to
contribute to his country Romero has had very little time to mourn his brother he
and his family are still living with the aftermath of the hurricane just like the
millions of other Puerto Ricans on the island the same can be happening to
other people who can be getting infected with this or another bacteria he said we
listen in the radio all the time about problems with the gas about lack of food
about problems with the water it is a lot of information that generates a lot
of uncertainty we fear for our health for our lives
-------------------------------------------
Princess Anna Easter Treats ! Cream Cake Game ! Game For Kids ! Funny Game ! - Duration: 5:29.
For more infomation >> Princess Anna Easter Treats ! Cream Cake Game ! Game For Kids ! Funny Game ! - Duration: 5:29. -------------------------------------------
Gabriele Oriali - European Play-Off Draw Reaction (EXCLUSIVE) - Duration: 0:59.
It wasn't exactly a kind draw for you, was it?
There's no doubt it could have been better. We're coming up against a side that's very strong physically and mentally and which plays good football.
Sweden proved that by beating France 2-1 in their group and knocking out the Netherlands. Swedish football is on the up.
They won the EURO U-21 title a couple of years ago. So, it's going to be a tough task for us.
Is it an advantage for you to be playing the return leg at home?
The advantage is that we'll know what result we need to get. And, obviously, the support of the fans can help us reach our objective.
-------------------------------------------
Martin O'Neill - European Play-Off Draw Reaction (EXCLUSIVE) - Duration: 1:38.
Your first impression when you saw the name Denmark popping up on screen?
Well naturally, first of all we are pleased to be in the draw we had to win our last couple of matches to get here.
Being one of the unseeded teams, it was going to be a difficult time for us.
We are obviously delighted to be in it.
I know Denmark and I know the manager. He and I used to play together, Åge Hareide.
And so, it'll be an interesting confrontation
Besides the opponent, we got to know as well the order of the matches, which one is going to be played where
Does it make a difference to the game plan to know that you are going to be playing the second leg at home?
I think if you ask most coaches they would prefer to play the second game at home.
That said, with the rules, with the away goals, and the possibility of extra-time and things like this
It gives the away team that chance to score not only in 90 minutes but in 120 minutes
So one negates the other, I must admit.
In terms of momentum, you couldn't have arrived at a better moment into the playoff draw
Does it make a difference for you to come from such a great win?
Like you had in the last leg of the group stage
I think naturally it does, as you mentioned momentum is very very important.
It was a great win for us; we won our last two games to get here in this position.
And so from my own view point as a national coach i'm just concerned now about the next couple of weeks
About our players not picking up injuries at club level. It's the same all over.
But I agree with you we've got a bit of momentum and we want to try and keep it going.
-------------------------------------------
Spotify® RapCaviar
For more infomation >> Spotify® RapCaviar-------------------------------------------
Tan tana tan tan tan tara I Cup ye bhi hoga humara - Duration: 0:23.
Tan tana tan tan tan tara
Cup ye bhi hoga humara
Australia hi na jeet paya toh
Number kahaan aayega tumhaara
Tan tana tan tan tan tara
Cup ye bhi hoga humara
-------------------------------------------
Hyundai ix35 1.6I GDI I-MAGINE Navi/Clima /17"LM/Trekhaak - Duration: 0:54.
For more infomation >> Hyundai ix35 1.6I GDI I-MAGINE Navi/Clima /17"LM/Trekhaak - Duration: 0:54. -------------------------------------------
Seat Arosa 1.4i Stella - Duration: 0:58.
For more infomation >> Seat Arosa 1.4i Stella - Duration: 0:58. -------------------------------------------
Toyota Corolla Verso 1.6 VVT-i Sol met TREKHAAK! - Duration: 0:54.
For more infomation >> Toyota Corolla Verso 1.6 VVT-i Sol met TREKHAAK! - Duration: 0:54. -------------------------------------------
Mazda 6 2.3I GT-M, Automaat, AIRCO, CRUISE, 105D KM! - Duration: 0:57.
For more infomation >> Mazda 6 2.3I GT-M, Automaat, AIRCO, CRUISE, 105D KM! - Duration: 0:57. -------------------------------------------
A TRAIN RIDE HOME - GERMAN SHORT STORIES - Duration: 5:25.
For more infomation >> A TRAIN RIDE HOME - GERMAN SHORT STORIES - Duration: 5:25. -------------------------------------------
Program Pierwszy (Jedynka) - 2 bloki reklamowe i zapowiedzi z 21 grudnia 2016 roku - Duration: 5:18.
For more infomation >> Program Pierwszy (Jedynka) - 2 bloki reklamowe i zapowiedzi z 21 grudnia 2016 roku - Duration: 5:18. -------------------------------------------
natural pink look 🌹 - Duration: 2:36.
fair warning, me getting silly for the left time
-------------------------------------------
LIVE Undertale True Genocide run (Final) - Nekomews - Duration: 1:36:30.
For more infomation >> LIVE Undertale True Genocide run (Final) - Nekomews - Duration: 1:36:30. -------------------------------------------
VID 21 - Duration: 6:00.
Hi everyone.
I was looking for the building
Of the videos and
I think i found them
I'm going to there.
Wish me luck
The building can be seen only from the back yard of an apartment building
I "sneak out" inside, i fear that i could be caught so i didn't use the camera inside
wha...
Well this in this part of the video i wanna explain what you just see
For start, the first part of the video was recorded
A few days later i upload the video of the teacher
At the end of July
eh..
Someone send me the data that the building that appears in some videos of the channel
Videos that, by the way, i didn't upload
can be in the same city that the teacher was living
And since I was living in that city in that moment, i wanted to take the chance
To see the building
And see if it had some relation with Ciro
If.. this person.. upload the videos.. it had reasons
It turns out that i discovered the building
Thanks to anonymous data
When i entered in the building..
I don't know..
I looked familiar to me, i was never in that place
But i feel that i knew it for some reason
And from one moment to another
I felt that someone push me
When i wanted to realize i wasn't in that building anymore
And.. i appeared in my hometown
That is more than 2000 kilometers (1242 miles) from i was moments before
And not just that, apparently i woke up
2 month later, i'm recording this video 1 week later after i arrive my home town
So I asked my family, apparently
I didn't just appear magically here, but i travel here
I reside here again
And..
i've been here more than two weeks
I don't remember anything of that. I don't remember that i travel
I don't remember to take the decision to leave
I don't remember WHY i decide to leave
Simply..
I dont know
I saw and lived the same that you watch in the video
I was there
And i appear here
Whatever happen in this months
Since that moment..
I dont know
I don't know what could happen
What happened
I mean..
What worries me the most is if something important happened in all that time
That could help me
To help HIM...
If he..
That *THING* ...
...doesn't want that i..
help Ciro
For some reason it made me forget what happened these months
I just want to tell yo that
-------------------------------------------
Assassin Creed 3 In Andriod Tamil Episode #1 By Sai Varun TamilGameWorld - Duration: 7:28.
Use Headphones for clear audio
use Headphones for clear audio
Use HeadPhones For Clear Audio(Recommended)
Use HeadPhones For Clear Audio(Recommended)
Use HeadPhones For Clear Audio(Recommended)
-------------------------------------------
Japonka słucha żartów o japońskich imionach [Napisy PL] - Duration: 8:34.
For more infomation >> Japonka słucha żartów o japońskich imionach [Napisy PL] - Duration: 8:34. -------------------------------------------
Outlander 3x07 Promo "Creme De Menthe" (SUB ITA) - Duration: 0:31.
For more infomation >> Outlander 3x07 Promo "Creme De Menthe" (SUB ITA) - Duration: 0:31. -------------------------------------------
Maid Mama: Dream Sweet Cafe Anime GO! Film Festival - Duration: 2:23.
For more infomation >> Maid Mama: Dream Sweet Cafe Anime GO! Film Festival - Duration: 2:23. -------------------------------------------
[#RapperLVF] The Vannalemon Roast Rap (Short) - Duration: 2:22.
- Vannalemon is back!
- She's back.
- She is returning!
- A fellow YouTuber's in danger.
- I'm really worried about her...
- I'M HERE TO STOP VANNALEMON.
- ...Someone else took over her channel!
- You wanna help save Vannamelon?
- Vannalemon be skilled!
- We've got to help Vannamelon!
- We will do our best.
- Melonheads, I'm still half-lemon, half melon...
But it's working. I still need you guys' help.
Keep sending me melons.
(whisper) - They'll never save her.
* welp...
* only one thing to do now.
* what the heck was...
* fuckfuckfuckfuckfuckfuckfuckfuckfuckfuck...
we must save the melon queen
-------------------------------------------
Meghan McCain Shows Arrogant Whoopi How Wrong She Is Calling Trump A Liar - Duration: 28:51.
Meghan McCain Shows Arrogant Whoopi How Wrong She Is Calling Trump A Liar
The new season of The View is very interesting, we have to admit.
Meghan McCain 'ripped off' Whoopi Goldberg in the last debate and made all conservative
viewers really happy.
Democrats, as well as their media, still want to sell the fake narrative about how Trump
disrespected a widow of a fallen soldier in Niger.
Read more below:
Senator John McCain's daughter Meghan recently joined the cast of ABC's hard-left political
talk show The View as their token conservative, replacing the departed Jedediah Bila.
Some were worried that McCain would end up just agreeing with the liberals like her father
has done, but she has actually proved to be a vocal foil for liberal blowhards Whoopi
Goldberg and Joy Behar.
On a recent episode, Whoopi, Joy and the rest tried to mock President Trump as usual, with
Joy saying, "[H]e hasn't made a single cash donation to any charity in the past five
years.
Right before the inauguration I believe it was he had to pay $25 million in damages for
the fraud at Trump University.
When he's forced to pay, he has to come up with the cash, if it's voluntary the
check is in the mail."
Shot back McCain, "I'm having a really hard time with this it's so deeply politicizing
military service on both sides.
" She later pointed out how hypocritical it was for Democratic Congresswoman Frederica
Wilson to try to accuse President Trump of not caring for soldiers.
Said Meghan, "Give me a moment.
Yesterday Congresswoman Frederica Wilson who was on yesterday was saying that her voting
record was amazing towards supporting the troops.
It actually came out-"
Joy cut her off, saying pointlessly, "The Congresswoman."
McCain continued, "Yes.
That it wasn't as supportive.
She opposed a bill that could have insured families of soldiers slain in Afghanistan
received death and burial benefits during a government shutdown.
I don't like the politicizing on either side, anyway, of slain soldiers!"
Are you glad McCain set the liberal View hosts straight about the falsehoods they keep spreading?
Here's more from the View debate:
H/T Conservative101
Do you agree with Meghan McCain?
Liberals should mind their own business and focus on their own internal issues because
the DNC is falling apart and the new investigations from the Senate could destroy their ratings
even more.
They
look pathetic, don't they?
SHARE
and
COMMENT
-------------------------------------------
#4Erasmus - The Journey - Duration: 1:32.
For more infomation >> #4Erasmus - The Journey - Duration: 1:32. -------------------------------------------
Minecraft Settimo Episodio - Duration: 11:56.
For more infomation >> Minecraft Settimo Episodio - Duration: 11:56. -------------------------------------------
Ornatrix plugin. Basic course. Chapter 6.8. Final part (RU Voice + En Sub) - Duration: 23:15.
Now let's return to our
hair and modify it little bit.
To begin - I will edit the groups.
To do this - I choose the Select tool
and changing the selection of the fringe.
Then - assign a first group for it.
Then select the side part.
In order not to touch the opposite part
during the selection - I turn on the option
Ignore Backfacing Guides.
But since I don't want
to assign the different groups on the side parts
I turn on the mirror and in this mode,
I select the part of the temporal lobe.
For them, I assign a second group.
Then I select the rest of the hair in this way
and assign a third group.
In result - I got three groups that I will manage.
By the way, in the previous tutorial - I placed
Push away from mesh after Edit Guides.
But it is better to place it at the very end.
So let's fix that mistake.
Now go to the Edit Guides.
select the red group by selecting the option
`select by group` and invert the selection
by pressing CTRL + I - to hide the rest.
Now you can press
hide button and proceed to
edit the fringe.
Edit it using different
instruments in the Edit Guides, which
I showed in the previous chapters - in this way.
Also don't worry that the hair crosses
the geometry - after all, we have the modifier
Push away from mesh and it will finish
its task in the end.
Unhide the all guides and see what happens.
For the correct result - we still need Rotate strands
Apply it and turn on the option which named
Orient Based on Strand and set the Angle value=180.
In result - your hair looks in the right direction
and in the geometry there is no
incomprehensible blackness.
Then edit the thickness of the plane for the fringe -
change the radius in Render Settings for
the first group and add Strand Detail
in order to make a more smooth bend.
Thus adding additional segments.
And edit the fringe to make it a bit more lush.
So when you're sure
that you won't change the length of the hair -
you can create one Edit Guide on top of the
Strand Length.
And work with it, as well as you can produce
the all changes and modifications
exactly in this Edit Guides.
This workflow is only suitable for working
with gamedev hair.
For production hair - a slightly different approach
and a large number of modifiers in Edit Guides -
will confuse you and the animator.
Because - usually animator works
with the first Edit Guides and the all changes
and modification - it is better to make in it.
So, continue to work with a fringe.
A little correct its shape, and also
edit some guides separately.
The basic form of hairstyles for example - is ready.
Since we have 3 groups, then in the 2nd scene
for the hair render - add another beam.
To do this, copy the plane to which
the first beam is attached.
Then apply to it a copy
of the Hair From Mesh Strips
and edit the plane a bit with FFD.
After that - proceed to the settings of the beam itself.
Now return to the scene with the hairstyle,
save it and go to the Mesh From Strands -
and turn on this three options:
Per-Strand UV Coords.,
Create Texture Atlas and
Str. Group Tex. Islands.
After that - convert it to the Editable Poly,
apply the Unwrap modifier and
see what happens.
In result - received three pieces on the UV box.
Since we assigned 3 groups.
Then - export this hair to FBX
and upload them into another scene.
I usually do it in the scene for backing.
After that, render the hair texture preview
to adjust the UV.
Next - assign this texture on the imported
hair and begin to edit the UV pieces
in Unwrap UVW.
Then export the object to the fbx and look,
what we have in the Marmoset Toolbag.
Open the Marmoset Toolbag.
Import model via File-> Import Model
and immediately turn off the option Cull Back Faces
otherwise, the part of the hair geometry
will be clipped.
Assign the base material with Albedo
and with the option Use Albedo Alpha.
In the end, we get this result.
As you can see, the hair turned out to be very thin.
Therefore, you should to refine the texture.
Return to the scene and make corrections
to the settings of each beam.
The main thing - remember one rule.
There are no universal settings that would always fit.
Every time - you will have to experimentally adjust
the all parameters to get
the ideal option.
Always experiment with the radius settings,
the amount of hair, and also the type
of their distribution to the plane in the
Hair From Mesh Strip Object settings.
As a result of experiments - I got this
texture and this result in the Marmoset Toolbag.
Naturally, it needs to be finalized, than now we will do it.
I return to the saved scene with the Ornatrix mesh
and proceed to edit the hairstyle.
First I'll work with a fringe.
I select the group with it.
Invert selection
and hide the rest groups.
After that - I select the longest hair
and those hairs that haven't been isolated -
I'll modify it a little.
To fit their length with the main ones.
To do this, I invert the selection again,
then I select the points and
in the side view I raise them up.
Then choose the Grow / Shrink Brush
and increase their length.
Then I cut off with the scissors approximately to
this length and comb them
to match with the fringe.
Thus - it turns out more lush hairstyle.
I turn on the plane display and modify the fringe
with selecting the individual guides.
Then proceed to the finalization of the remaining
groups hairstyles.
I select the plant and grow the new guides.
The main thing - don't forget one rule.
When you grow the new guides -
a neutral group is assigned to them.
So once you've finished the growing -
select them and assign the desired group.
I keep adding the new guides to
make the hair growth more evenly.
And to close the empty spots on the head.
Also edit the radius of the each group in this way.
That the planes are more correctly attached to the head.
And combing them a little.
Then I go to the Strand Detail in each group,
except the fringe and reduces the number
of the triangles and set the value
of the viewport parameter = 3
Total - the weight of the all hair = 8744 triangles.
But this is not the final value,
because I will further refine it.
To make the hair texture more interesting -
return to the scene for the backing and set up
the hair shader in this way.
The basis is the same VrayHairInfoTex.
Output - Position Along Strand.
Color A - absolutely black,
and in Color B - load the another VrayHairInfoTex
in which Ouput = Position By Strand Index.
and in the slots loaded Ox Hair texture
with such parameters.
As a result - it turned out this color
with a darkening on the roots.
The darkest level can be controlled in the main
VrayHairInfoTex using the bias parameter.
If its value is higher, then there will be more blonde hair.
If lower - less.
I usually put a value = 0.4
The final texture looks like this.
I added a special thin
hairs which the real hairstyle have to create
a small chaos.
To do this - I used the two
types of hair - long and short.
Also slightly reworked the fringe,
I made a separate beam for side and
back hair and added the hair -
which are located near the fringe for more
smooth transition from it to the basic hair.
Then - rendered the Directional map, Normal map
and the one texture for specular, ao and cavity.
To render the textures - I used
a special script, which you can be download
in my blog - in Materials4Tuts by clicking on the link
which named - Ornatrix Script.
Now I will show the scene
rendering of textures and the all settings, and also
how to install and use this script
The final scene to render the textures
looks in this way.
In the final - I got the 3 materials.
The first - to render AO, Specular and Cavity.
It settings is very simple.
Into the slots - diffuse, primary and secondary specular
and overall - I loaded VrayHairInfoTex texture
with these settings.
In the Output = Random by Strand Index.
In the slot A - white color with such parameters,
and in the slot B - a little lighter.
I used the second material like as main
for the all beams except -
beam for mixing with the fringe.
The settings of this material look like this.
VrayHairInfoTex in the diffuse, primary and
secondary specular slots.
In Output- Position Along Strand.
In slot A - no longer black, but gray with such settings.
In slot B - another VrayHairInfoTex,
in which Output - Random By Strand Index.
In Color A and B - OxHair texture
with these settings.
And the third material - especially for
a smooth transition from the fringe to the other hair.
This is the copy of the second material.
But the bias in the main VrayHairInfoTex = 0.2
That's all I wanted to say about the materials.
Now go to the analysis of the settings for each beam.
So.
The first beam.
Initially for him, I drew such splines.
But then, in the course of experiments -
came to this kind in Edit Guides.
Then applied Hair From Guides
to import guides and after applied Frizz
with the following settings.
The curve in the render settings looks like this
and Radius = 0.2.
Then - I applied MeshFromStrands
to render the tangent normal maps and
VrayOrnatrixMod to render the diffuse and normal map.
But they are turned on separately.
And since -
select each bunch and include separately
from these modifiers - is inconvenient.
I created a small script,
which makes it massively.
If you have a lot of bunches - it will be useful to you.
I will show the script work later.
And now proceed to the second bunch for the side hair.
Like everyone else,
except for fringe and short hairs,
I created by using HairFromMeshStrips.
Modifier settings look like this.
Next comes Strand Length with such parameters.
Then Strand Frizz ...
Render Settings ...
And, as usual - MeshFromStrands and VrayOrnatrixMod.
So, Come on ...
Short hairs for giving chaos was obtained from splines.
Here, everything is standard =)
I added Multiplier to achieve this effect.
And to increase the amount of the hair.
Next - Strand Frizz, Render Settings
and in general - all standard.
The fringe settings look in that way.
I also got it from the splines.
Then still lined them in Edit Guides.
The other bunches have also typical settings.
Therefore, I won't analyze them in detail.
Now let's talk about how to install the script
for rendering the maps and I'll show you - how to use it.
Drag it in 3dsmax window.
Then go to the Customize settings -
Custom User Interface.
Choose Quads tab.
And in the list on the left - find the Ornatrix Game Tool.
Choose it and drag to the right side.
This action will add the script to the RMB menu.
So how do you work with this script?
Let's imagine a situation that you
currently turned on the MeshFromStrands
for the all bunches.
And you want to turn on the VrayOrnatrixMod,
to render albedo and normal.
To do this - select the all bunches,
press the right mouse button and
select the script.
A window will appear with two options.
So, to turn off the MeshFromStrands
and turn on the VrayOrnatrixMod for the all bunches -
click on the button which named - bake diffuse normal.
As a result - in each bunch you will see a turned on
VrayOrnatrixMod, which allowing you to render
the albedo map and normal map.
If you will select the all bunches again
and press the bake directional map button,
VrayOrnatrixMod will turned off,
and MeshFromStrands will turned on for each bunch.
To render the normal and directional map in Vray -
you should add the VrayNormal render element
and always same the image after rendering
with Override 1.0.
For correct gamma display.
So I tell everything about the textures.
Now let's talk about the scene with the hair,
as well as the scene in Marmoset Toolbag
and the hair material settings.
So, the final mesh looks like this.
It have - 11 468 triangles.
Mesh is divided into 7 groups in the Edit Guides.
2 group - for temporal part,
1 group for the back of the head.
1 group for the fringe.
1 group for the chaotic long hairs,
1 group for short, and a separate group
for a smooth transition from the fringe to the temporal part.
For the each group - I added
Strand Detail and Render Settings.
To control the range and the detail.
If you interested, in more detail analyze
and want to rotate the model -
Click on the link, which is now
will appear in the upper right corner.
And by clicking on it - you can buy
this model on the CGTrader shop.
So, now come to the Marmoset Toolbag 3 scene
and I'll show you what I have in the final.
And also talk about the hair shader settings.
But before uploading the geometry
of the hair in marmoset - you must
bake the vertex normals, where you feel comfortable.
In the Maya or 3dsmax.
About Vertex normal and methods of baking -
you can read by clicking on the link in my blog.
Go to the Materials4Tuts
and click on the Polycount VertexNormal Info link.
On the site you will see a detailed article on this topic.
You can check many baking methods
in Max and in Maya.
I personally prefer to use the transfer attributes in Maya.
Since this method is the fastest for baking
and miscalculation comes instantly.
Unlike the scripts in the 3dsmax.
So how do you bake vertex normal in Maya?
Everything is very simple.
Import the hair mesh.
Then create a sphere.
Scale it and align to the crown of the hair mesh.
Then in a Front view remove this part.
Select the Edges and drop them down,
to obtain such an this object.
Now select the sphere.
Then our hair and
go to the Mesh -> Transfer Attributes.
The settings look like this.
Press Apply.
Do not deselect the objects -
go to the Edit and select Delete by type history.
This is done so that you can delete
a sphere and won't lose the baking result
on the hair mesh.
The transfer of vertex normals is performed
in order to make softer shadows,
a smooth transition between the geometry of the hair
and a realistic result in the engines.
As a result of all actions - I got
this result in Marmoset.
Keep in mind one thing.
What if the render settings - you set
the Resolution = 1: 1,
then the quality is a little worse in the viewport.
To see the final quality,
which is obtained when exporting -
Choose 2: 1.
Through this resolution - you will see
the sharper details and in general -
the better render.
Downsampling is done to optimize
viewport on slower video cards.
So now let's talk
about the scene and materials settings.
On the Sky - I have set the standard HDRi
from the Marmoset collection.
Then add the main and back lights.
Main light is located slightly above,
and the backlight located behind to highlight
the hair from this position and
to show the scattering effect.
I attached this two lights to the Sky.
To during the turn of HDRi they also
changed their position.
And another rule about which I want to tell.
During the import of the model,
be sure to select the correct units.
Marmoset have a special setting and
the men guide, so that to help you make
the correct settings.
Usually - I choose centimeters for two parameters.
This is done,
to properly display the shadows and scattering.
Now let's talk about the hair shader settings.
First of all - I turn on the hair tessellation
with using PN Triangles.
To smooth the overall shape,
that it was not a lowpoly.
If you turn off it and look at the edges
then you will understand what I mean.
Then, as usual - in the normal map slot load
appropriate map.
Microsurface settings look in that way.
Into the albedo - loaded a diffuse map and of course
tuned on the scattering.
If you will look at this reference,
you'll see - like the hair react to light.
Scattering is enabled to achieve this effect.
To show how it works in the Marmoset -
I reduce the brightness of the environment and turn off
the main light source.
The scatteting settings look like this
and in scatter map slot I loaded specular texture.
In the Reflectivity slot - I chose Dota Specular,
because thanks to this option -
we have more realistic reflections,
rather than with a simple specular.
And you have more options to achieve
the interesting results.
Into the Specular mask and Specular exponent
I uploaded the same map - specular_ao_cavity, which
looks that way.
Then, to obtain the correct form flare,
anisotropic - in Secondary Reflection and Reflection
choose this type.
And in the Directional Slot load the
that normal map which we rendered
with the tangent normal mode in MeshFromStrands.
It is thanks to it and such settings -
it turns realistic flare.
Next - turned on AO and Cavity,
and in the transparency - choose Dither effect.
Since it is working well with opacity map.
To use the alpha from the albedo slot -
turn on the option - Use Albedo Alpha.
That's all I wanted to tell
regarding the setting of the material and scenes.
The chapter turned out to be full.
Therefore it - I won't show
the creation of men's hairstyles,
and loading into the Unreal Engine 4.
These materials are included in the Chapter 7.
And in conclusion of the chapter - I would like to
share with you news about
the two groups that I created in Discord.
Links to these groups - will be in the description.
And now I will tell you what they created for.
In Ornatrix Community - you can ask your
questions about the plugin.
To do this, there are two tags.
For RU & EN users.
In the #news tag - I load the all news about
the plugin for 3dsmax and maya.
In the #showcase - you can show your works.
And in the #worldworks - I load the different works,
which are found on the Internet.
In the #ideas - write the different ideas about Ornatrix.
In the #tutorials - I download the all lessons about
Ornatrix for 3dsmax and maya.
In #chat - you can communicate with each other
about Ornatrix and other themes.
And in #offtopic - to have conversations on any topic.
In #bugs - naturally write the all Ornatrix bugs
with which you have experienced.
Now let's talk about my group.
I think many subscribers
are waiting for this moment to have
the ability to write me questions, and
get the answers.
Since in PM - I can't always answer to them.
Here I will ... Always answer ...
Not immediately, but I will.
In this group - you'll find the #news room,
in which I will upload the all news
about my channel and the new tutors.
In the #tutorials - is a list of the all lessons.
Also, there is room for questions from around the world
and the Russian-speaking population.
#chat room set up to communicate with each other
on any topic.
And in the #showcase - you can upload your work.
A reference to the portfolio, and so on.
That ended the 6th chapter.
Krivulya Andrew Charly with you.
If you click the thumbs-up -
I will be very pleased.
Don't forget to subscribe to the channel,
to not miss the new lessons,
and turn on the bell for notifications.
And of course share this release through
the Share button.
Peace for everyone!
-------------------------------------------
수트핏에 이어 여심 설레게 만드는 우도환의 '셔츠핏' - Duration: 2:58.
For more infomation >> 수트핏에 이어 여심 설레게 만드는 우도환의 '셔츠핏' - Duration: 2:58. -------------------------------------------
How I Make Money Online For more infomation >> How I Make Money Online-------------------------------------------
Japonka słucha żartów o japońskich imionach [Napisy PL] - Duration: 8:34. For more infomation >> Japonka słucha żartów o japońskich imionach [Napisy PL] - Duration: 8:34. -------------------------------------------
CAN SLIM Growth Investing William O Neil English - Duration: 18:39.
Hello everyone, my name is Nrupen and in this video we'll take a look on investing method
of William O' Neil, who as per my personal opinion is world's greatest techno fundamental
investor.
In this video I'll try to give small description of this book, "How To Make Money In Stocks
A Complete Investing System" in which he describes his Growth Investing System CAN
SLIM.
The basic investing ideology of William O' Neil was invest in growth of business not
on baseless ratios and numbers.
From his book I learned why PE is possibly the most useless number on which investors
try to invest.
His statement, "A great deal of P/E analysis is based on
personal opinions and theories that have been handed down through the years by analysts,
academicians, and others, whose track records when it comes to making money in the market
are both questionable and undocumented.
To say a company is undervalued because at one time it was selling at 22 times earnings
and it can now be bought for 15 is ridiculous and somewhat naive.".
Pretty much makes looks everyone who keeps talking about PE bonkers because his own performance
as investor enabled him to be youngest investor to buy a seat on Wall Street.
His book helped me understand almost all methods of investing that involves PE in them are
weaker form of investing methods because almost everything about PE is theoretical and I should
stop looking for PE no matter how I want to invest.
His idea of investing is simple, invest in growth of business because growth of business
leads to increased earnings and increased earnings lead to increase in stock prices.
I took his advise of throwing PE out of window and started looking for businesses with earning
potential.
At present my investing method focuses just on earning potential and I am very happy with
kind of results I am getting with it.
Before we take a look on CAN SLIM here are some mistakes which as per him majority of
investors make and suffer losses.
1.
Focusing only on when to buy, without any idea about when to sell.
2.
Taking action on immature buy signals in greed of more profit and thus ending up with nothing
more than loss.
3.
Fearing to exit positions in loss only to make more losses.
4.
Not following your sell rules in greed of more profit.
5.
Crying over losses that you never made in market.
6.
Buying second rate stocks because they are value stocks.
He admitted he also made similar mistakes with very brutally honest attitude.
CAN SLIM is hard rules investing method, which means none of the rules that are listed in
CAN SLIM should be broken while investing to use it to its maximum potential.
CAN SLIM is actually acronym of list of attributes that a great growth company posses to outperform
rest of the market.
As per Will you can not invest as growth investor without learning charts.
All growth stocks show similar kind of price volume activity, and to prove his point he
has compiled a list of more than 100 growth stocks from history, you can take a look on
them in his book.
A growth business always forms a consolidation pattern before exhibiting upside.
As per Will, Cup-With-Handle, Saucer, Flat Bases, Ascending Bases, High Tight Flags,
Linear bases and Double Bottoms are most trustworthy chart patterns when it comes to reflect successful
consolidation.
Once stock matches CAN SLIM criteria on fundamental front, stock must also show any one of these
chart patterns.
C in CAN SLIM represents Current Quarterly Earnings and Sales should be increasing.
As per Will to qualify first rule of CAN SLIM a stock must show increase in quarterly earnings.
For example Q3 Earnings of 2017 should be greater than Q3 Earnings Of 2016 and minimum
growth should be 18 to 20% or more.
As per Will 5 to 10% growth is insufficient to trigger good upward momentum.
Again you must not compare current quarter's earnings with last quarter's earning.
Means Q3 Earnings of 2017 should not be compared with Q2 Earnings of 2017.
Also make sure that accelerating earnings should be supported by accelerated sales.
If earnings are increasing but sales are not then there is something fishy going on and
it is a warning signal.
So C tells us Current Quarterly Earnings Per Share (EPS) should show increase of minimum
18 to 20% followed by net increase in Total Revenue.
"A" in CAN SLIM represents increase in Annual Earnings.
As per Will company should annually grow at least by 25%, as per his study of growth stocks
successful growth stocks show minimum 36% increase per year.
As per him minimum Return On Equity for last 3 years should be minimum 17%, consistency
is everything.
Unless stock shows more than 17% ROE for 3 years without fail it will not qualify for
second rule of CAN SLIM.
He advises to look for minimum 20-25% ROE each year.
"N" in CAN SLIM represents New Management, New Product, New Expansion Plans and New Consolidation
Patterns.
Stock prices can not rally up if there isn't anything new to drive prices up.
As per Will a company should bring something New to the table, either it be new management,
New Product or New Expansion Plan.
If company fulfills something new criteria then you'll see a new consolidation pattern
forming on price chart.
You have to purchase stock as soon as stock breaks out of consolidation.
"S" stands for less supply and more demand.
The stock should have less number of outstanding share because less outstanding shares increase
liquidity which help prices rise and fall quickly.
To avoid loss due to liquidity look for company in which company owners and management have
held majority of stocks.
In today's scenario this information is not easy to get, better have a strict selling
rule.
If stock goes excessive splits then supply will increase which might lead prices down
so it is better to liquidate your position if company declares 3 for 1 or 5 for 1 stock
splits.
Same doesn't apply for 2 for 1 stock splits.
Stock should have low debt to equity ratio to justify supply and demand of its shares.
A stock with high debt to equity ratio have huge risk associated with it.
Aggressive companies are not worth buying if they can't manage their debt.
"L" in CAN SLIM stands for Leader Or Laggard.
Leader doesn't mean biggest company, a leader stock is one, which not only out performs
the market but also the other stocks in its industry.
To know your stock is leader or not compare it to industry index and other stocks of industry
that are outperforming index.
Honestly I would recommend not to go in hassle of comparing your stock with every other stock
in industry.
If it is outperforming industry index and it also matches other criteria you should
buy it, and the reason I am recommending this is because a good comparison can take a very
long time.
Growth stocks have tendency to move faster.
So if you'll be spending a lot of time to conduct proper comparison, you will miss the
right price to purchase.
Having a stock that is better than good but less than best is lot better than having none
of them.
"I" stands for Institutional ownership.
Will insists that stock you are buying should be held by few very reputed institutions.
Institutions means Mutual Funds, Hedge Funds or Wealth Management Firms.
And these institutions should have proven record of performance.
The reason for this is, in spite of the fact that there are 1000s of stocks in stock market,
almost each stock has passed eyes of some institution.
If a stock doesn't have institutional ownership it means that company has been rejected from
best guys of business.
There are 100% chances that everyone who rejected that stock might be wrong but while growth
investing for any reason we do not prefer to take any risk.
"M" in CAN SLIM stands for Market Direction.
Will says you should only enter market when it is on bull.
You should book profits and wait for new bull market to reinvest your money if market turns
direction and goes bear.
After stock qualifies all letters of CAN SLIM it is time to check which of his favorite
consolidation pattern has formed over price chart.
He emphasizes that you should buy stock as soon as it breaks consolidation.
By the way, he would sell stock immediately if prices of stock would fall 8% within same
week.
Though this was a good condition then, it can't be applied to today's market scenario.
You are advised to device your own selling rule before you put this method into action.
He would sell if stock would generate 20% upside within 3 months, on other hand if stock
would create 20% upside in a month he would hold that stock for more than 3 months expecting
multi bagger gains.
Now advantages of his method is that it helps you find best growth stocks and keeps you
invested in best performers.
People who have manged to find stocks that match CAN SLIM has multiplied their money
from 3 fold to 10 folds in a single year.
Will advocated for a concentrated portfolio in which he would focus on keeping only best
performing stocks and removing under performers.
Will would remove all those stocks from his portfolio which would fail to perform more
than 20% in 3 months.
His portfolio strategy was strict, if stock doesn't perform as per his rules then he would
say good bye to them and focus on highest performers.
This helped Will pocket big profits with help of small number of stocks in portfolio in
which all stock would seem to performing like crazy.
The disadvantage of his method is that it is extremely difficult to find stocks that
really match all conditions set by William O Neil.
In any given bull market there are hardly 10 to 15 stocks that can match all conditions
set by Will.
And if you fail to find them in time, you most likely would also miss opportunity to
invest in them.
CAN SLIM is hard rule investing method which means if stock fails to meet even one condition,
stock will fail to qualify for investment.
Now Will's investing model works because it is very practical.
If a business is earning more and becoming bigger every single day there is no reason
why it's stock prices will not start moving up.
For example, here's chart of Porwal Industries, Porwal Industries is ideological match to
Will's Investing method.
Finding mathematical match is very difficult therefore we'll for now stick to this example.
On technical front, Will advised to look for consolidation pattern aka base, forming above
50 day EMA.
To understand logic behind this, first you have to understand how technical analysis
works.
First understand this, Technical Analysis and trading on that technical analysis are
2 totally different skills, you may be able to analyze stocks technically but can you
trade or not, is another question.
To create chart setup we follow specific steps.
Step one is to select the Price Theory that you want to use for your setup.
Keep in mind all Price Theories in one form or other states one and the same thing and
can be used with any method of analysis, only naming culture differs.
Most popular price theory is Dow Theory and it is widely used for indicator trading, I
am also an indicator trader but I prefer Price Cycle Theory.
Price Cycle Theory is kind of very unknown price theory because its name collides with
Hurst's Price Cycle.
Any search related to Price Cycle Theory usually ends with Hurst's Cycle.
Next is Crowd Psychology Theory specially used while Pattern or Candle Stick Trading
and finally Elliot Wave Theory which is quite popular among Geometric Traders.
Keep in mind, any theory can be used with any method of trading.
Popularity of Theory specific to trading method, does not change the final result of setup.
And the reason for that is almost all price theories are in one form or another are derivatives
of Economic Cycle.
Which means when you are trading price charts, you ain't really trading just price you are
trading levels of supply and demand.
All indicators, all setups and all concepts of technical analysis are dedicated to help
you trade Economics working behind business.
Economic Cycles can be as small as 1 day to 1 hour and as long as weeks, months, years
to decades.
And therefore we have golden rule of Techno Fundamental Analysis, "Technical Always
Follow Fundamentals".
And it works irrespective of selected time frame because same is the case with Economic
Cycles.
When this came to my notice I changed my fundamental investing method to match new theory of successful
business with respect to Economic Cycle of business.
Any stock that qualifies to be successful based on Economic Cycle of business matches
qualities of a value as well as growth stock.
Good part is, it is easier to analyze stocks based on Economic Cycle of business than any
other method of analysis.
In case you want to learn how to analyze stocks based on its Economic Cycles links are in
description of this video.
Contrary to what you believe, fundamental analysis is much easier than Technical Analysis.
Now as per Price Cycle Theory price moves by forming price cycles.
With respect to uptrend first minor cycle is used to detect beginning of new upside,
trade is usually taken on second cycle and exit has to be made before trend ends or at
the end of trend.
Will stated if stock matches CAN SLIM criteria then first let prices come above 50 Week EMA
and enter trades on formation of consolidation patterns.
Now most consolidation patterns form as beginning of new price cycle, mostly at beginning of
second minor cycle.
Form which we can say that if you found stock that matches all conditions of CAN SLIM, best
place to enter position is first pattern break.
Which brings us to chart of Porwal Industries.
Now as per definition of Uptrend, "In an uptrend price moves up by creating and breaking
newer resistances, result is series of higher highs and higher lows".
On chart you can see prices are moving up by creating and breaking newer resistances,
each new high is higher than previous high and each new low is higher than previous low.
Whenever such conditions are formed price usually start moving above 30 and 50 day EMA.
Now we know prices do not move with 100% consensus to definitions and concepts therefore we have
to work with close matches.
Therefore, the condition that prices must be above 50 week EMA, defined condition required
for uptrend, it included all conceptual close matches for fundamentally strong stocks with
active uptrend.
Next he advised to enter consolidation pattern break, which means he advised to enter second
cycle of uptrend.
It also tells us as per CAN SLIM model the best place to invest is first pattern break.
And as per ideological match Porwal Industries last week broke out of consolidation rectangle
also known as The Linear Base.
The 50 week EMA marked beginning of uptrend, then came first consolidation pattern which
formed and broke above EMA.
The first pattern break is best place to enter any stock that matches Will's investing ideology
because it automatically places you into second cycle which again with respect to Price Cycle
theory is best place to enter trades.
So last week when Porwal Industries broke its consolidation pattern, the entry price
of 54 was best place to invest in it.
Will's contribution to investing industry is that he helped investors understand why
looking for all ratios and numbers is waste of time and irrelevant.
He gave us a growth investing model based on which we can build a very good investing
method for ourselves.
What I consider as his biggest contribution is his emphasis on having a selling rule because
selling rules provide you idea about where and how profit should be booked and where
you should be ready to book loss or less profit.
Selling rules are something that help you pocket more than average profits.
While creating my investing model I took 3 elements from Will's model first is earning,
second is direction of price and third is having strict selling rule.
Will's method would focus on buying stock at its high and selling higher, I also buy
stocks at its 52 week high and sell it higher.
And just as he would sell if stock would match selling rule I also sell without hesitation
if stock matches my selling rule.
Finally we can say that Will's investing method demanded very high level discipline, from
which we can conclude that disciplined investing method helps you outperform markets by huge
margin.
Its no brainier that his students also made similar kind of profits as he made himself
and also won several investing competitions.
Finally as I always say, no video is good enough to justify original work of any investor.
To understand Will's method to its core buy his books and learn from them.
With that said thanks for watching this video and have a nice day.
-------------------------------------------
Nikah Se Pehle Ye Video zaror Dikhin | En 6 Qisam Ki Oraton Say Nikkah Maat Karin - Duration: 15:10.
Nazreen Shadi se pehly sye video Lazmi dekhin...warna sari zindgi pachtayen gy
No comments:
Post a Comment