*** NOTE: These subtitles were later made with respect to the video ***
*** to make it more understandable ***
*** Discrepancies between audio and subtitles are wanted ***
*** to correct or make the voices spoken more clearly ***
Thanks a lot and GOOD VISION!
Hello everyone and welcome to a new address book
which will be titled "Experiments of the Beginner"
why this name?
Because they will be things I never did before
and that is why I will enjoy doing it
without having any experience behind it
As the first video of this section
we will try to realize it by us
a load for a high-wagon
for this wagon is high
wagon that is part of the collection
"Build Your Miniature Italian Railroad"
for this type of wagon
looking at various external sites
the recommended loads
they can be either crushed or charcoal
I our case
we will generally make a wagon
of a rocky material
of dark black color
which can therefore be assimilated to what everyone prefers
the particularity of the load we are going to build
It is essentially the possibility
to be removable
in the sense that
the load will not be inserted inside the wagon
or rather it will NOT be inserted DIRECTLY inside the wagon
but by means of a plastic container
this container is of the same size as the wagon
an important note
is that during the realization I realized
than in the attempt to paste the crushed cargo
I used the diluted vinyl glue,
and past the container with the attack
the result is that
the diluted glue discharged the attack and the container broke
so this is the same container glued again
and once dried
Silicone was applied
anti water
in the various joints
so that the liquid glue does not bend
and do not damage the structure
the choice of whether or not to construct this container is optional
there are those who have a great deal of wagons
and so he says
"I want to use that particular wagon"
always carrying gravel
or in this case crushed stone
or there are some like me
having only one wagon
he prefers to make different exchangeable loads
the realization of different loads
it also has the advantage
to allow you to increase your constructive experience
with a number of lower wagons
in the sense that a wagon used to carry different types of loads
will result in a greater number of self-made loads
which will give you the opportunity to improve your manual work during a large number of jobs
as you could see, but the container
it is transparent and with evident traces of glue / silicone
therefore even if it was lower than the wagon sides
although in my case it is higher and I have to level it up
the problem is that
seeing it from above, despite the burdensome load
you will see the plastic of the container
so it is advisable to paint it with the techniques you choose, or otherwise dirty
despite the fact that plastic is the same
will be less impact
I will try to paint it dark-colored airbrush
it will become all black, the load will be black
and so it will confuse well
this problem does not arise when the car is loaded directly into the car.
I tried now to do the aerography painting
of the plastic container
it did not come perfect because I'm pretty sure it was too diluted the color
but as a first attempt in my life
I would say it could go even worse
Also that is a shiny plastic treated
so maybe pre-treatment treatment was needed
I will see later how to behave according to the result obtained
Now, how do we load it?
I thought, during the summer holidays
to get me to borrow from Sicily
of volcanic rocks
why volcanic rocks?
because they are very nice
and I also have one as a souvenir over the bed
and why they crumble... where they should not...
which is a pleasure
so it means this rock
which I have already tried to accomplish in the previous experiment
once powdery
"if I did not spit on you it would be very much like..."
it will give us a really nice crushed stone effect
also at cost 0
as Etna produces it every day
and I believe that Sicilian friends will not get angry for this loan
then: what to do is pick a piece
since this is enormous
try to spit it with a hard surface or with a severe surface
if not used
since I had permission, you can try it with one
beat the meat, believe this is the name
I will try it as they have given me the free way
the important thing is to use a surface that does not suffer the blows
because in the other experiment I used the bottom of an old vessel
which crumbled
and so it's okay
so if one has an object suitable to crunch things or beat them
you could also use a hammer
but the hammer is perhaps too violent
or rather depends on the surface on which this work is done
a floor recommended
better fit
or a floor that does not suffer the blows
as can be of very old type old tiles
Okay, we moved
we crumbled a bit of rock
I apologize for the new location
I will raise my voice a little bit otherwise traffic out will be annoying
the operation we are going to do right now
will be going to load
our container
as said, could have been much better
but the glossy plastic was not our friend
the operation we are going to do now will be
that of going to put
trying not to spit too much
our load that we crumbled, as I said before
with a sliced meat
inside our small tank
compared to the other time, this time
we will try to do the job in a smarter way
then to keep the crushed stone together
we will use dilute vinyl glue
hoping they did not put too much water
let's remember that vinavil has the advantage of becoming transparent
and in any case then it would not become him
we try to keep it as much as possible in the lower part of the container
the advantage of having put the silicone
compared to the experiment I did last time
consists in avoiding the glue
especially liquid liquid...
"the liquid... liquid..."
WOW!
that the glue dilutes
do not get out of the container dirtying around
in fact, it should stay
firm in the lower part
going to solidify
and keeping the load base stable
At the top
then you will have to do it
to further pulverize the crushed stone
to keep the scale proportions
too big stones are not good and they are unrealistic
and they are not nice to see
In fact you can also use a gravel
which you can buy in a model shop
and obviously you avoid having to crumble the rock
but I think it loses much of the charm of DO-IT-YOURSELF
Also the liquid glue, unable to get out of the container
it will increase the mass of the same
giving it a greater weight
in my opinion, also a greater realism
as when they are too light
they give a lot of plastic feel
while a load made of real material
and with some mass, secondly I have another level of realism
remember for obvious reasons
it is not possible to reproduce scale weight
also because otherwise a normal electric motor
present in our engines
he would not be able to trawl it
now with this powder we will finish the top
Second me the aesthetics is very beautiful!
what we now need to do
is try to paste the top
without however going to touch it too much
so I think it will be useful for the most diluted glue
and use it in a very fine way
Once we have let the glue dry
now it is not yet, but I could not wait to dry it completely
the result will be more or less something like this
with our load that will sprinkle from the shore just enough to give the effect of a true load
also as I said during the procedure
the use of diluted glue and crushed stone actually increases the weight of this object
therefore it can only be used with locomotives of some power
because if you add the weight of 3/4 wagons of these
it is not difficult for the towed weight to reach half the kg
so you have to be careful when doing these jobs
then to actual use on the track
I do not think there is anything else to say
you have to be very patient while the glue dries
I thank you for seeing this video
if you have any advice I am delighted to hear you
as mentioned earlier
This section talks about experiments
I greet you
and see you next video! THANKS TO VISION!
For more infomation >> Ued: Mattia Marciano ha scelto la sua compagna - Duration: 3:42. 
For more infomation >> Garotas Malvadas (Filme) - Duration: 1:49:27. 
For more infomation >> From IPv4 to IPv6 - Duration: 11:32. 
For more infomation >> [VOSTFR] [CC] KBS Exclusive Interview BTS on Billboard Hot 100 Future Goal No 1 - Duration: 5:08. 
For more infomation >> Cosa è un ventilatore centrifugo? - Duration: 2:33. 
For more infomation >> VW Touran - Duration: 1:07. 
For more infomation >> #Cartabianca - Alba Pariertti e il sesso passionale - Duration: 0:29. 
For more infomation >> Art of Conquest - Episode 2 - Duration: 20:02. 
For more infomation >> Jordan 11 Custom Patent Le...
For more infomation >> EBA 01 Introducción - Duration: 2:49. 
For more infomation >> Ana Rosa Quintana mete un corte al director de TV3 que le deja tiritando - Duration: 2:11. 
For more infomation >> Camino Real Monterrey, Mexico (North America). The best of Camino Real Monterrey in Monterrey - Duration: 5:12. 
For more infomation >> Jokes Seth Can't Tell: Black Santa, 30 Best Lesbian Love Songs - Duration: 3:20. 
For more infomation >> Ted Danson Can't Keep a Secret - Duration: 2:43. 
For more infomation >> Ted Danson Called Ellen DeGeneres Helen - Duration: 2:44. 
For more infomation >> Stopmotion Play Doh Peppa Pig School Time Funny Class Lightning McQueen Crazy Car Drives Through - Duration: 12:54. 
For more infomation >> How Do Property Auctions Work? - Duration: 1:51. 
For more infomation >> MAX ET RUBY - Une citrouille pour Halloween 🎃 - Duration: 23:32. 
For more infomation >> 이효리 이상순 근황 제주도집 - Duration: 4:13. 
For more infomation >> Ted Danson Hates Baseball - Duration: 2:08. 
For more infomation >> LORD KNOWS ! CHANNEL AD | GIVEAWAYS ANNOUNCEMENT | - Duration: 1:10. 
For more infomation >> Virginity vs The NHS: The Hormone Diaries Ep 3 (cc) - Duration: 8:24. 
For more infomation >> Hottest Virgins- Latest 2017 Nigerian Nollywood Ghallywood Movie - Duration: 26:56. 
For more infomation >> PRETTY BLIND GIRL- Latest 2017 Nigerian Nollywood Ghallywood Full Movie #3 - Duration: 1:06:02. 
No comments:
Post a Comment