Hello guys, welcome back, today I have for you a BKS lock
It is the series 42 model
it was sent to me by my friend Michael, "Potti314"
thank you very much Michael
is a very nice lock, is completely new
three original keys
As you can see works perfect
It is very unique
It is a tumbler lock and has reversible keys
I had not seen any tumbler with reversible keys
It is very well thought out
the kay way is very curious
It is very open and is offset from the vertical axis to the left
as you see
pins are very accessible, there is no problem
and is a five pinner
I show coding
the third is very short
the fifth is also relatively short, and fourth, first and second are longer
as the key way is very accessible, there is no problem in setting the pins
but it is very fun to pick
It takes a very strong springs
I have not gut it yet, I'm looking forward to seeing
takes spools
and undertakes to maintain a very high tension
very high for what I'm used to, especially when you are driving spools
If you do not keep high tension, you do not have feedback and
and also you lose those set pins
It is a highly addictive lock, very curious to pick
let's try opening
and if we succeed
will gut it
and we see what is inside
the first time I managed to open it, I takes me a while
because Ioverset the pins, they fell down
I went with very little tension
it had no feedback
I will use this home made wrench
which fits quite well in the key way
and this Klom set pick with the fine tip
applying high tension there is no problem, it is well notice when you set a pin
we will try to open, from front to back
first nothing
second nothing
third is binding
He makes a click, fourth is binding
a click and a turn on the plug, fifth calls
one click and false set is accentuated
first nothing
second is binding
It is a spool
gives rotation and set
Third nothing, nothing fourth, fifth is binding
one clic, and the false set returns, first nothing
second is set, third nothing,
fourth one click
fifth nothing
first and second are set
third one click
fourth one click
fifth nothing
first and second are set
by touching the third falls into a false set
It is a false fairly pronounced as you can see
we go to first, first is binding
It is a spool
gives rotation
We set it, has been heard falling down several pins there
second and third nothing
anything fourth, fifth ask
It makes a click
fourth one click
third one click
first and second nothing
third one clic, fourth one click,
fifth nothing
and playing back to the third
would open
a very nice opening
It really is fun
asks a lot of tension
we will try to gut it
and we see what is inside
Let's go there
well, this is what it would take into
all key pins
are normal, apparently Steel
I think the fourth has some kind of tapered or beveled ends, but not sure can´t see it properly
we will take close ...
There it is, they seem to have beveled, it is very sharp
all apparently all normal and all from steel as I say
and as for the driver pins: 1st and 2nd are spools, steel appears the first, the second brass
They are very long, very nice, very well done
third and fourth are barrel type
Very nice too
I did not expect
and fifth is a normal pin
springs are copper color, very strong
I´m surprised becouse the strength with which they act
and I think it is very well done lock because
because you have to play many touches to set the pins
Well, it would have been the opening
of the BKS series 42
It is a very nice lock, I thank you Michael so much, it´s a different lock and
that's always very nice to open
and this would have been the opening, I hope you liked it, you find it useful and Thank you very much for your time
a greeting
No comments:
Post a Comment