Youtube daily report Jul 1 2017

Let's see what they sent me.

Filters for viruses and bacteria! They are incredible!

Here is what I had asked for: a Geigerrig camelback.

And they sent me another one to give to my followers! I can't believe it!

I'll go gossiping about what each thing is...

Hello, how are you? Today I'm going to talk about the camelback and the Geigerrig's hydration system.

They are the ones I will use on the trip to Africa.

Why? First, because they are really easy to use.

Open the bag here, disconnect the tubes to not dirty the equipment and fill with water the bag (this is a three liters one).

There is different sizes.

Then you should remove all the air, fold the flap and close again.

After, you connect the bag to both tubes and put it again inside the camelback.

You should put all your stuff inside the camelback and then pressurize the hydration bag.

Can you see how it grows?

Pressurizing the bag never takes more than 20 pumps.

After pressurizing we can start drinking the water.

If we want to share water with others, clean our vehicle or refresh our faces, the Geigerrig system allows us to spray water in this way.

A practical detail is that we can turn this part of the drinker to block the water outlet. It is an anti-leakage system.

Geigerrig equipment operates under pressure and this means that the filter can be used in this way.

The placement of the bacteria and virus filter is very simple, it connects to the tubes in this way.

To remove it, press the button on the tube.

How does it work? The pressure carries the water through the filter and from there to the tube so that you can drink it.

The filter removes approximately 99.99% of viruses, bacteria and fungi.

It is especially useful if you travel through Africa, China or rural areas without access to drinking water.

The filters are tested by the US Environmental Protection Agency (EPA).

They guarantee a duration of 90 days of uninterrupted use. Then you have to change the filter.

To change the filter we open the container and change the inner part that can be purchased separately on the Geigerrig website.

Each filter is tested before it reaches the market.

There is a very common bacterium that is called giardia.

To give you an idea, if you spend three days in a row drinking water from a river you have a 50% chance of having giardiasis that affects the thin instestine causing an infection.

This filter prevents you from having those diseases.

When we get home we take the air and water out of the bag, disconnect the tubes,

turn it around without fear of breakage (the material is extremely hard) and wash it in the dishwasher.

The Geigerrig 1600M backpack comes with a 3 liter hydration bag.

It is also very comfortable because it has a rigid and padded back, a detachable waist belt for long trekkings,

easy placement of the tubes to the straps, multiple waterproof closures, and a system to hang what we want from it.

It also has a chest strap and the logos and closures are reflective.

The Geigerrig hydration system is easy to use, washable, comfortable and resistant.

What is the surprise?

To participate in the draw of the RIG650 backpack with a water reservoir of two liters and the container to be able to add a filter...

You should: 1) Comment the video, 2) Like Hasta Pronto Catalina's Facebook page, 3) Like Geigerrig's Facebook page. You have time until July 10, 2017. I will select the winner the next day.

The Geigerrig team sent me these products for the raffle. I had tried them before and I asked for them because I like them very much.

They are not sponsoring me. So… take advantage of the draw because it is a very good product.

For more infomation >> Camelbak with Anti-Bacteria and Virus Filter - Duration: 7:41.

-------------------------------------------

Y se sacó la espina Dwyer y con este gol, Team USA le está ganando 1-0 a Ghana - Duration: 1:03.

For more infomation >> Y se sacó la espina Dwyer y con este gol, Team USA le está ganando 1-0 a Ghana - Duration: 1:03.

-------------------------------------------

Michael Jackson - Gone Too Soon & Heal The World (Live Bill Clinton Gala 92) Subtitulada en Español - Duration: 10:01.

For more infomation >> Michael Jackson - Gone Too Soon & Heal The World (Live Bill Clinton Gala 92) Subtitulada en Español - Duration: 10:01.

-------------------------------------------

[Touhou Vocal] [RegaSound] Hoshi no kizuato (spanish & english subtitles) - Duration: 5:30.

I sat down, arms around my knees, without turning the light on

And then I heard the gentle sounds of laughter. I sighed.

You were so far away on my heart's map

And I didn't raise my hands toward the cold door.

I hid myself and gazed upon those colourless footprints.

It's too painful for me to trace the fragments of my memories

Once more with my fingertips. I can't dream.

The scars of stars are too far away, so we don't notice them.

I looked up at the sky alone.

Slanted rays of sunlight peeped from the sky.

I saw it for the first time and couldn't hide my wonder.

That small figure was decorated and shaded in, and then…

I'm afraid and I'm in the darkness again.

I can't find you. I want to start crying.

I remember you once more.

I look at the sky, into the distance.

I'm rocked to and fro by the echoing voice of time. Ah…

The seasons passed by.

I sing and sleep, embracing my feelings, for eternity.

Why can I only look at you, whom I love so much,

From afar? My heart begins to hurt.

The scars of stars are too far away so we don't notice them.

I looked up at the sky alone.

Translated by Releska

For more infomation >> [Touhou Vocal] [RegaSound] Hoshi no kizuato (spanish & english subtitles) - Duration: 5:30.

-------------------------------------------

Björk - Desired Constellation (Sub) - Duration: 4:20.

For more infomation >> Björk - Desired Constellation (Sub) - Duration: 4:20.

-------------------------------------------

☯ RAZA SUPERIOR ~ DL:MB (Reiji) | #1 | - Duration: 11:51.

For more infomation >> ☯ RAZA SUPERIOR ~ DL:MB (Reiji) | #1 | - Duration: 11:51.

-------------------------------------------

Guía Saint Seiya Zodiac Brave ; Camus de Acuario ♒ - Duration: 3:24.

For more infomation >> Guía Saint Seiya Zodiac Brave ; Camus de Acuario ♒ - Duration: 3:24.

-------------------------------------------

isdaneko - Don't Call Me (Audio) - Duration: 3:06.

For more infomation >> isdaneko - Don't Call Me (Audio) - Duration: 3:06.

-------------------------------------------

Tali - Goza Video Official 2017 - Duration: 4:38.

For more infomation >> Tali - Goza Video Official 2017 - Duration: 4:38.

-------------------------------------------

Mensaje para su noche. 1 Julio - Duration: 1:01.

For more infomation >> Mensaje para su noche. 1 Julio - Duration: 1:01.

-------------------------------------------

The ZiTrocks - DESCARGAR PACK VFX QUE USA ByViruZz GRATIS 2017 - Duration: 1:35.

I'm bringing you today

THE BEST VFX PACK OF ALL ...

ONE AND PAYMENT

I BRING IT FREE (LINK IN DESC.J

THE BEST VFX PACK OF ALL THE TARIGO FREE ENJOY IT

LIKE AND SUB? : D

For more infomation >> The ZiTrocks - DESCARGAR PACK VFX QUE USA ByViruZz GRATIS 2017 - Duration: 1:35.

-------------------------------------------

Woodturning a table lamp! - Duration: 5:41.

temperature are 38 degrees and the heat have boil my brain !!! LOL

hello everyone

today

i have this piece from olive root

and this

as you can understand we will make

one table lamp

so lets start !

first i cut the wood on size

i make a hole to catch it on the chuck !

i secure the wood with the tail stock !

and i put the tool rest in the right place !!!

i start with a roughing gouge !

with a bowl gouge i will start to bring the wood on the design !

i will measure the umbrella and the wood so the wood be near to 2/3 of the umbrella

i will use only the half wood

with parting tool i give the size of the final project

and i make the shape with spindle gouge

i unbelievable how wet is the wood

i have cut this tree 5 years before

but isn't a big deal !!! LOL

i will clean a bit the lines with NR scraper and with parting tools the to sides

i finish a bit with round nose scraper

i start sanding with 180 grit and 700 rpm

240 grit

320 grit

400 grit

Y G

and bees wax

now i need to make a hole that cable go trough

for this reason i use a spiral drill 8mm

then i measure to see how far need to go

i use a 10mm drill to make the hole in a perfect size

it is time to cut this from the main wood ! my friend Spiros come to help me !!

excellent !!! LOLOLOLOL

with the leftover i will make a bowl all the time that Spiros fix the electrics of the lamp !!

then we make two holes

one in the middle and one in the side !

so the cable go out from the wood in a nice way !!

switch

cable

wood

umbrella

plug !!!

so i let Spiros alone and i will make a bowl !!!

polyurethane glue

one more video run to the end

here is the lamp

hopefully Spiros pass by and make the electrics

so i make a bowl with the left over wood

i hope you also like it !!we will speak next Sunday !! i hope SPiros pass again LOL

until then take care !!!

For more infomation >> Woodturning a table lamp! - Duration: 5:41.

-------------------------------------------

HMS Queen Elizabeth is a masterpiece which is totally flawed - Duration: 10:14.

HMS Queen Elizabeth is a masterpiece which is totally flawed

THE launch of a new Navy flagship is supposed to make the country go all gooey with pride. We're supposed to clutch our hands to our chests while humming I Vow To Thee My Country.

A magnificent ship but is there really a point to it?. And then we are supposed to sleep soundly in our beds, knowing that our borders are safe.

While on a tour of the Navy's spanking new carrier HMS Queen Elizabeth, an eagle-eyed journalist noticed that it is fitted with the exact same software that was hit by a massive cyber-attack a couple of weeks ago.

Now everyone is running about, waving their arms in the air saying that baddies will be able to hack the ship's mainframe and order it to attack itself or drive up the Thames and explode outside the Houses of Parliament.

Well, I don't know about you, but I think it has bigger problems than that. Such as: It's designed to house 36 fast jets. None of which has yet been built.

No jets will be available to the warship for another three years. Apparently, three of the Anglo American F-35s will be delivered to the Navy in 2020, then six more the following year.

Quite what the crew is supposed to do to defend itself in the meantime is unclear. Use rude gestures, perhaps?.

Make no mistake, I love that ship. I love the way it was built using the exact same modular construction that cheap hotels use to make their bathrooms.

The HMS Queen Elizabeth is the first of two big warships being built. This kept costs way down and that means there was enough left over for a sister ship, HMS Prince of Wales, which is due to be launched in 2020.

Also with no planes. My biggest worry, though, is that both these enormous vessels — they're as long as three football pitches — are operated by the Ministry of Defence.

And the one thing an aircraft carrier cannot do is defend. It is built to attack.

Set up for attack… but do we really need to nowadays?. It is designed to take our air power to parts of the world it would not ordinarily be able to reach.

It's designed to put the fear of God and a bag full of bombs into the hearts of people who think they're out of range.

Which means that our top brass really does believe that in ten or 20 years' time, Britain will still be roaming round the world trying to bring democracy and cups of tea to a load of people who, as we've seen in recent times, don't really want it.

AFTER dangerous gases used in aerosol sprays and fridges were banned, everyone expected the hole in the ozone layer to heal very quickly. But that is not happening. And now scientists have worked out why.

The process used to make decaffeinated coffee emits another sort of gas – if I wrote its name down it would fill up the rest of the newspaper – and it's not good for our ozone protection barrier either.

Sausage rolls… Are they the only way to save the planet?.

Which fills my heart with hope that soon it'll be discovered that other leftie food and drink stuff – brown rice, rocket, veggie burgers and so on – are damaging the environment as well.

And that to save the human race from extinction, everyone must eat Pork Farms sausage rolls, dipped in HP Sauce.

Its civil unrest in France. CIVIL servants in the French city of Marseilles were very cross this week when they were politely asked if they wouldn't mind turning up for work.

Years of militant trade unionism has meant that in recent years, council employees have enjoyed a pretty relaxed working week. Fire crews protesting in Lille, France this week.

Refuse collectors, for instance, were allowed to go home when they felt they had done enough. This led to an average working day of three hours and 30 minutes.

Meanwhile, 50 of the city's 80 emergency social workers have been working between ten and 12 days a month. And that's before we get to the average number of sick days, which has been running at 37 a year.

Needless to say, demands that they do a fair day's work for a fair day's pay have not gone down well.

A message for Macron… Civil unrest in France led by the unions. They held a meeting. There was a show of hands. And they all walked out on strike.

Since then, no work was being done at all. Not that anyone noticed the difference. When we go to France, we are supposed to put our watches forward an hour. But really, we should put them back 45 years.

WE are always being told that the lesbians we see on the internet in their stockings and not much else are just "actors". Real lesbians, people say, wear dungarees, have Birkenstocks and plaited armpit hair.

Really?. I only ask because all week we've been reading about an alleged affair between a warder and an inmate at Send Prison in Surrey.

And both parties look exactly like the lesbians you see online. Prison officer Faron Selvage is alleged affair to have had an affair with inmate Sydnee Offord.

Searching for point behind fine. SO, Google has been putting adverts for its own services at the top of its web pages.

And somehow, this is against the law. In fact, it's so against the law that this week, the European Commission hit the American tech giant with a fine of £2. 1billion.

Has Google been unfairly fined?. Well, I'm sorry but if it's illegal for Google to prominently advertise itself on its own website, how is Marks & Spencer allowed to sell its own clothes inside its stores?.

Why isn't it forced to sell Asda trousers as well?. And why doesn't the man in my corner shop point out that milk is cheaper at Tesco?.

Google has even been clobbered for not featuring other search engines on the site. But why should it?. The owners of these little search engines say they are unable to compete. To which I say: "Diddums.

Keep F1 fast and furious. DURING last weekend's Formula 1 race in somewhere called Baku – nope, me neither – Ferrari's Sebastian Vettel, deliberately rammed into the side of Lewis Hamilton's Mercedes.

And now everyone is gnashing their teeth and saying he has brought the sport into disrepute. Vettel rammed rival Lewis Hamilton.

And encouraged road rage among impressionable youngsters. They want him sent to the naughty step and banned and fined and made to do lines. Pah. This is exactly what the sport needs. Some genuine hotheads displaying some genuine human emotion.

Sebastian Vettels actions are part of the spectacle and complaints should stop. When they are on the car-to-pit radio, most of the drivers sound like they're playing a computer game after a nice Sunday lunch.

And that's boring for the viewers. We don't want robots. And that's why old Seb gets my support for the rest of the season. Unless of course, in the next race, Lewis rams him back.

My special Bond with Michael. Author of Paddington, Michael Bond passed away this week.

MICHAEL BOND, the author of all those wonderful Paddington Bear stories, died this week. I first met him in 1971, when my mother, started making the Paddington Bear soft toy.

Shirley Clarkson made the Paddington bear toys.

… and Jeremy became a big fan. He became a good family friend.

He was the kindest and most ­gentle of men and had such a dry sense of humour that he was one of the few grown-ups I used to like having in the house. He made me laugh a lot.

I shall miss him.

RATHER than re-house everyone in a tower block that's now known to be a fire risk, would it not be more convenient for the residents, and a damn sight cheaper, to employ full-time fire marshals who can patrol the corridors, ready to tackle any blaze before it gets out of hand?.

Residents leave Camdens Chalcots Estate following fears over the cladding used on London tower blocks.

For more infomation >> HMS Queen Elizabeth is a masterpiece which is totally flawed - Duration: 10:14.

-------------------------------------------

How to Get BIG Shoulders with Calisthenics - Duration: 8:37.

Targeting your shoulders with calisthenics may be difficult, especially in the beginning,

because the best exercises are quite challenging.

However, with a little bit of knowlege and good advice it can done successfully.

Hello, I'm TrainingPal and in this video I'm gonna tell you how to build

big and strong shoulders with bodyweight exercises.

Let's start with a quick look at the shoulder muscles.

Deltiods are the main ones and they're what most exercises will focus on.

Keep in mind, that this muscle has 3 parts: front, middle and rear.

That's why some exercises may look like they're back exercises, but in fact,

they're targeting rear delts.

Another muscle that will be used a lot is trapezius, especially it's upper part.

The most important thing to understand is what you need to do with your arms

to engage your shoulders.

Generally all the overhead presses are the most important move pattern for this purpose.

There are also different kind of raises that focus on certain parts of your deltoids.

And there are famous shoulder shrugs.

Those are the moves we will try to replicate with bodyweight exercises.

This move is pretty problematic, because this exact move pattern is done

by doing handstand push up and they're quite difficult.

However there's a way to start with easier exercise – pike push ups.

This push up is trying to replicate the overhead press,

but using only a portion of your bodyweight.

The easiest way to do them is to bring your hips as high as you can

and aim with your head to touch the ground just above your hands as you go down.

This version requires a lot of pike flexibility though,

which I realize, many of beginners don't have.

So here's another good way to do it.

Place your feet on an elevation, that's approximately as high as your knees.

Put your hands on the ground and try to place your hips over your shoulders.

Then just bend your arms, again,

aiming with your head to touch the floor a little above your hands.

After you get comfortable with this kind of load, it's time to go further.

There's really no other good option then getting on your hands.

Handstand push ups are one of my all time most favourite exercises

and I recommend everyone to start training for them.

Of course you don't need to be doing freestanding ones.

For the purpose of getting big and strong shoulders, using the wall is more than fine.

So where to start? Of course with the handstand.

Just kick up with one foot and get into the position.

Here you need to focus on keeping your elbows straight and pushing away from the ground.

Build up at least 30 second hold before moving along.

Next, it's time to start bending your elbows.

You want to go down slowly, get out of the position at the bottom,

and kick up back into the handstand. That's how you do the negatives.

It's an incredible way to increase your strength for the push up.

After you get comfortable with the negatives,

you may add a 2 second hold at the bottom – just for some additional effort.

After that, it's time to start trying actually going up.

At first you don't have to do full reps. You can go down only halfway and push up.

As long as it's a way to get stronger for the full range of motion, it's ok.

That's how you get the handstand push up:

gradually increase the range of motion until you can do a full rep.

As you're in the process of learning the move,

you want to keep the reps under 6, because it's a strength training.

After that, you basically want to do max rep sets until you get to about 12 handstand push ups maximum.

Then, instead of going further with the number of reps,

you want to increase the difficulty.

I recommend doing it by slightly increasing the range of motion by placing your hands on an elevation, like parallets.

This will make your max reps drop down back to the 6-12 range

which is optimal for muscle development.

This movement pattern is targeting the front parts of your deltiods.

Unfortunately, most of the bodyweight exercises are quite difficult here as well,

because you have to use all of your bodyweight for most of them.

You can start by doing planche leans.

Leaning your body forward and keeping the elbows straight loads the front delts.

The more you lean the more stress you put on them.

Also, remember to turn your wrists outwards to make the move easier for them.

Next, you can move on to holding a tuck planche.

Here all your bodyweight is supported by your shoulders, so they're working very hard.

Be sure to keep your elbows straight.

Another exercise using the front delts intensively is something I've used when learning press to handstand.

I don't have a name for it, but here's how you do it.

You need to get into the handstand position with your belly facing the wall.

Then you move away from the wall a little, lean forward with your shoulders and come back.

The distance from the wall and the amount of lean is to be experimented with,

because it determines the difficulty of the exercise.

Again, be sure to keep your elbows straight and wrists turned outwards.

From here, there's a pretty big difficulty increase, but these exercises are my favourite way to fatigue the front delts.

The exercise is a tuck planche negative.

You basically get into the handstand, and slowly lower your body to the tuck planche position.

Pretty hard, but a great one. Something to work your way up to.

And of course there's also the tuck planche press itself.

Even harder and even better.

this one is pretty straightforward, but you're gonna need either rings or TRX to do it.

You need to hang the chosen device on a regular pull up bar height

and set the grips approximately on the height of your knees.

Then you grab the handles, lean back and press backwards with your arms.

The exercise can be used to develop rear deltiods and whole trapezius muscle.

You can adjust the difficulty of the exercise by changing the amount of lean,

so be sure to pick the one, that lets you do between 6 and 12 reps maximum.

this is one of the most commonly known exercises used for building your upper trapezius.

Normally, you would grab the barbell and raise it without bending your elbows.

The same exact situation can be observed after rotating your body by 180 degrees.

Instead of the barbell, you have a pull up bar or rings

and instead of the weight, you've got your body.

At first the movement can be somewhat confusing, but after a few sets

you'll easily get used to using the proper muscles.

The move is quite difficult on the bar, because you have to constantly pull with your lats

to keep your body from falling down.

Good way to aproach this problem is to do the shrug in tuck position.

This way you can keep the center of mass of your body under the pull up bar.

An alternative would be to use the rings instead.

This way you can keep your body ideally between your hands.

I'm not gonna show you a proper shoulder-specific workout,

because I do those exercises scattered all over the week in different training sessions.

I don't think you need the whole separate workout dedicated for the shoulders.

Doing these exercises in combination with pull or push session

enough to send your shoulders a massage

'Hey guys it's time to grow stronger and bigger'.

That's all for today. Thanks for watching, hope you liked the video and see you in the next one.

For more infomation >> How to Get BIG Shoulders with Calisthenics - Duration: 8:37.

-------------------------------------------

channel trailer - Duration: 0:58.

For more infomation >> channel trailer - Duration: 0:58.

-------------------------------------------

WoW Legion PvP Gameplay Patch 7.2.5 - Temple of Hotmogu Brawl - Enhancement Shaman OWNS! - Duration: 7:33.

WoW Legion PvP Gameplay Patch 7.2.5 - Temple of Hotmogu Brawl - Enhancement Shaman OWNS!

For more infomation >> WoW Legion PvP Gameplay Patch 7.2.5 - Temple of Hotmogu Brawl - Enhancement Shaman OWNS! - Duration: 7:33.

-------------------------------------------

The ZiTrocks - DESCARGAR PACK VFX QUE USA ByViruZz GRATIS 2017 - Duration: 1:35.

I'm bringing you today

THE BEST VFX PACK OF ALL ...

ONE AND PAYMENT

I BRING IT FREE (LINK IN DESC.J

THE BEST VFX PACK OF ALL THE TARIGO FREE ENJOY IT

LIKE AND SUB? : D

For more infomation >> The ZiTrocks - DESCARGAR PACK VFX QUE USA ByViruZz GRATIS 2017 - Duration: 1:35.

-------------------------------------------

Chainmaille Tools - What Tools Do I Need to Learn Chain Mail? - Duration: 2:19.

In this lesson, I will be talking about chainmaille tools.

To start out in chainmaille, all you need are two sets of pliers.

Technically, needle nose pliers are thinner, finer versions of chain nose pliers. This

description does not always apply, however, since there are so many manufacturers of so

many different styles and sizes of pliers.

First, round nose pliers won't work in chainmaille.

They are actually for curling and wrapping wire.

They don't allow for a good strong grip on jump rings, which is absolutely essential

in chainmaille.

So when shopping for pliers, make sure that you're buying chain nose, needle nose or even

tapered flat nose pliers.

One of the most important considerations is the surface texture of the pliers' jaw.

Ideally, you will want flat, non-marking pliers as opposed to the pliers with ribbed or serrated

jaws.

You can see the difference here between the two surfaces.

Using pliers that have toothy jaws is a sure fire way to mar the smooth appearance of your

jump rings.

Pliers with a smooth inside surface have a much smaller chance of damaging your metals

while you work.

The next factor to consider is the width of the plier tips.

I recommend using pliers with tips that are no wider than 2mm.

I personally rarely use anything larger than 1.5mm.

This allows you so much more maneuverability, especially when working with smaller jump

rings.

And finally, although this may not impact you much at first, you will definitely notice

the handle style of your pliers after a while, especially if you're working on a time-intensive

project.

Wherever possible, I like to use pliers that have ergonomic handles or gel handles that

conform to the shape of my grip.

I'm a huge fan of these gel pliers, partially because they're super comfortable, but I'm

not gonna lie!

They're also great fun to play with!

For more infomation >> Chainmaille Tools - What Tools Do I Need to Learn Chain Mail? - Duration: 2:19.

-------------------------------------------

Camelbak with Anti-Bacteria and Virus Filter - Duration: 7:41.

Let's see what they sent me.

Filters for viruses and bacteria! They are incredible!

Here is what I had asked for: a Geigerrig camelback.

And they sent me another one to give to my followers! I can't believe it!

I'll go gossiping about what each thing is...

Hello, how are you? Today I'm going to talk about the camelback and the Geigerrig's hydration system.

They are the ones I will use on the trip to Africa.

Why? First, because they are really easy to use.

Open the bag here, disconnect the tubes to not dirty the equipment and fill with water the bag (this is a three liters one).

There is different sizes.

Then you should remove all the air, fold the flap and close again.

After, you connect the bag to both tubes and put it again inside the camelback.

You should put all your stuff inside the camelback and then pressurize the hydration bag.

Can you see how it grows?

Pressurizing the bag never takes more than 20 pumps.

After pressurizing we can start drinking the water.

If we want to share water with others, clean our vehicle or refresh our faces, the Geigerrig system allows us to spray water in this way.

A practical detail is that we can turn this part of the drinker to block the water outlet. It is an anti-leakage system.

Geigerrig equipment operates under pressure and this means that the filter can be used in this way.

The placement of the bacteria and virus filter is very simple, it connects to the tubes in this way.

To remove it, press the button on the tube.

How does it work? The pressure carries the water through the filter and from there to the tube so that you can drink it.

The filter removes approximately 99.99% of viruses, bacteria and fungi.

It is especially useful if you travel through Africa, China or rural areas without access to drinking water.

The filters are tested by the US Environmental Protection Agency (EPA).

They guarantee a duration of 90 days of uninterrupted use. Then you have to change the filter.

To change the filter we open the container and change the inner part that can be purchased separately on the Geigerrig website.

Each filter is tested before it reaches the market.

There is a very common bacterium that is called giardia.

To give you an idea, if you spend three days in a row drinking water from a river you have a 50% chance of having giardiasis that affects the thin instestine causing an infection.

This filter prevents you from having those diseases.

When we get home we take the air and water out of the bag, disconnect the tubes,

turn it around without fear of breakage (the material is extremely hard) and wash it in the dishwasher.

The Geigerrig 1600M backpack comes with a 3 liter hydration bag.

It is also very comfortable because it has a rigid and padded back, a detachable waist belt for long trekkings,

easy placement of the tubes to the straps, multiple waterproof closures, and a system to hang what we want from it.

It also has a chest strap and the logos and closures are reflective.

The Geigerrig hydration system is easy to use, washable, comfortable and resistant.

What is the surprise?

To participate in the draw of the RIG650 backpack with a water reservoir of two liters and the container to be able to add a filter...

You should: 1) Comment the video, 2) Like Hasta Pronto Catalina's Facebook page, 3) Like Geigerrig's Facebook page. You have time until July 10, 2017. I will select the winner the next day.

The Geigerrig team sent me these products for the raffle. I had tried them before and I asked for them because I like them very much.

They are not sponsoring me. So… take advantage of the draw because it is a very good product.

For more infomation >> Camelbak with Anti-Bacteria and Virus Filter - Duration: 7:41.

-------------------------------------------

Honda CR-V 2.0I ELEGANCE **Automaat** Eerste eigenaar** - Duration: 0:56.

For more infomation >> Honda CR-V 2.0I ELEGANCE **Automaat** Eerste eigenaar** - Duration: 0:56.

-------------------------------------------

[Touhou Vocal] [Undead Corporation] Fairy Dance (spanish & english subtitles) - Duration: 4:21.

That's why I believe you

That's why I deceive you

These's no one I can be with

Guide me to somewhere

That's why I love you and that's why I leave you

Still I hear you call my name

Moonlight will take me there

I'm waiting through the night

so someone can find me

I'm dancing through the night

I wish it never dawns

Am I destined to sink in deeper

Into the sea I've shed?

That's why I trust you

That's why I betray you

There's no sign I can see now

Guide me to somewhere

That's why I love you and that's why I hate you

Still I feel you touch my lips

Moon shines on through the night

This light has brought you here

It's blowing through the night

The echos of your voice

Am I born to feel this grief forever at the edge of the world?

That's why I trust you

That's why I betray you

There's no sign I can see now

Guide me to somewhere

That's why I love you and that's why I hate you

Still I feel you touch my lips

Moonlight will take me there

That's why I trust you

That's why I betray you

There's no sign I can see now

That's why I love you and that's why I hate you

Still I feel you touch my lips

Guide me to somewhere

That's why I love you and that's why I leave you

Still I hear you call my name

Moonlight will take me there

Moonlight will take me there

For more infomation >> [Touhou Vocal] [Undead Corporation] Fairy Dance (spanish & english subtitles) - Duration: 4:21.

-------------------------------------------

Mazda 626 2.0i Exclusive - Duration: 1:02.

For more infomation >> Mazda 626 2.0i Exclusive - Duration: 1:02.

-------------------------------------------

Toyota Yaris 1.0-16V VVT-i Terra - Duration: 0:56.

For more infomation >> Toyota Yaris 1.0-16V VVT-i Terra - Duration: 0:56.

-------------------------------------------

Toyota Corolla Verso 1.6 VVT-i Terra - Duration: 0:58.

For more infomation >> Toyota Corolla Verso 1.6 VVT-i Terra - Duration: 0:58.

-------------------------------------------

Woodturning a table lamp! - Duration: 5:41.

temperature are 38 degrees and the heat have boil my brain !!! LOL

hello everyone

today

i have this piece from olive root

and this

as you can understand we will make

one table lamp

so lets start !

first i cut the wood on size

i make a hole to catch it on the chuck !

i secure the wood with the tail stock !

and i put the tool rest in the right place !!!

i start with a roughing gouge !

with a bowl gouge i will start to bring the wood on the design !

i will measure the umbrella and the wood so the wood be near to 2/3 of the umbrella

i will use only the half wood

with parting tool i give the size of the final project

and i make the shape with spindle gouge

i unbelievable how wet is the wood

i have cut this tree 5 years before

but isn't a big deal !!! LOL

i will clean a bit the lines with NR scraper and with parting tools the to sides

i finish a bit with round nose scraper

i start sanding with 180 grit and 700 rpm

240 grit

320 grit

400 grit

Y G

and bees wax

now i need to make a hole that cable go trough

for this reason i use a spiral drill 8mm

then i measure to see how far need to go

i use a 10mm drill to make the hole in a perfect size

it is time to cut this from the main wood ! my friend Spiros come to help me !!

excellent !!! LOLOLOLOL

with the leftover i will make a bowl all the time that Spiros fix the electrics of the lamp !!

then we make two holes

one in the middle and one in the side !

so the cable go out from the wood in a nice way !!

switch

cable

wood

umbrella

plug !!!

so i let Spiros alone and i will make a bowl !!!

polyurethane glue

one more video run to the end

here is the lamp

hopefully Spiros pass by and make the electrics

so i make a bowl with the left over wood

i hope you also like it !!we will speak next Sunday !! i hope SPiros pass again LOL

until then take care !!!

For more infomation >> Woodturning a table lamp! - Duration: 5:41.

-------------------------------------------

How to Get BIG Shoulders with Calisthenics - Duration: 8:37.

Targeting your shoulders with calisthenics may be difficult, especially in the beginning,

because the best exercises are quite challenging.

However, with a little bit of knowlege and good advice it can done successfully.

Hello, I'm TrainingPal and in this video I'm gonna tell you how to build

big and strong shoulders with bodyweight exercises.

Let's start with a quick look at the shoulder muscles.

Deltiods are the main ones and they're what most exercises will focus on.

Keep in mind, that this muscle has 3 parts: front, middle and rear.

That's why some exercises may look like they're back exercises, but in fact,

they're targeting rear delts.

Another muscle that will be used a lot is trapezius, especially it's upper part.

The most important thing to understand is what you need to do with your arms

to engage your shoulders.

Generally all the overhead presses are the most important move pattern for this purpose.

There are also different kind of raises that focus on certain parts of your deltoids.

And there are famous shoulder shrugs.

Those are the moves we will try to replicate with bodyweight exercises.

This move is pretty problematic, because this exact move pattern is done

by doing handstand push up and they're quite difficult.

However there's a way to start with easier exercise – pike push ups.

This push up is trying to replicate the overhead press,

but using only a portion of your bodyweight.

The easiest way to do them is to bring your hips as high as you can

and aim with your head to touch the ground just above your hands as you go down.

This version requires a lot of pike flexibility though,

which I realize, many of beginners don't have.

So here's another good way to do it.

Place your feet on an elevation, that's approximately as high as your knees.

Put your hands on the ground and try to place your hips over your shoulders.

Then just bend your arms, again,

aiming with your head to touch the floor a little above your hands.

After you get comfortable with this kind of load, it's time to go further.

There's really no other good option then getting on your hands.

Handstand push ups are one of my all time most favourite exercises

and I recommend everyone to start training for them.

Of course you don't need to be doing freestanding ones.

For the purpose of getting big and strong shoulders, using the wall is more than fine.

So where to start? Of course with the handstand.

Just kick up with one foot and get into the position.

Here you need to focus on keeping your elbows straight and pushing away from the ground.

Build up at least 30 second hold before moving along.

Next, it's time to start bending your elbows.

You want to go down slowly, get out of the position at the bottom,

and kick up back into the handstand. That's how you do the negatives.

It's an incredible way to increase your strength for the push up.

After you get comfortable with the negatives,

you may add a 2 second hold at the bottom – just for some additional effort.

After that, it's time to start trying actually going up.

At first you don't have to do full reps. You can go down only halfway and push up.

As long as it's a way to get stronger for the full range of motion, it's ok.

That's how you get the handstand push up:

gradually increase the range of motion until you can do a full rep.

As you're in the process of learning the move,

you want to keep the reps under 6, because it's a strength training.

After that, you basically want to do max rep sets until you get to about 12 handstand push ups maximum.

Then, instead of going further with the number of reps,

you want to increase the difficulty.

I recommend doing it by slightly increasing the range of motion by placing your hands on an elevation, like parallets.

This will make your max reps drop down back to the 6-12 range

which is optimal for muscle development.

This movement pattern is targeting the front parts of your deltiods.

Unfortunately, most of the bodyweight exercises are quite difficult here as well,

because you have to use all of your bodyweight for most of them.

You can start by doing planche leans.

Leaning your body forward and keeping the elbows straight loads the front delts.

The more you lean the more stress you put on them.

Also, remember to turn your wrists outwards to make the move easier for them.

Next, you can move on to holding a tuck planche.

Here all your bodyweight is supported by your shoulders, so they're working very hard.

Be sure to keep your elbows straight.

Another exercise using the front delts intensively is something I've used when learning press to handstand.

I don't have a name for it, but here's how you do it.

You need to get into the handstand position with your belly facing the wall.

Then you move away from the wall a little, lean forward with your shoulders and come back.

The distance from the wall and the amount of lean is to be experimented with,

because it determines the difficulty of the exercise.

Again, be sure to keep your elbows straight and wrists turned outwards.

From here, there's a pretty big difficulty increase, but these exercises are my favourite way to fatigue the front delts.

The exercise is a tuck planche negative.

You basically get into the handstand, and slowly lower your body to the tuck planche position.

Pretty hard, but a great one. Something to work your way up to.

And of course there's also the tuck planche press itself.

Even harder and even better.

this one is pretty straightforward, but you're gonna need either rings or TRX to do it.

You need to hang the chosen device on a regular pull up bar height

and set the grips approximately on the height of your knees.

Then you grab the handles, lean back and press backwards with your arms.

The exercise can be used to develop rear deltiods and whole trapezius muscle.

You can adjust the difficulty of the exercise by changing the amount of lean,

so be sure to pick the one, that lets you do between 6 and 12 reps maximum.

this is one of the most commonly known exercises used for building your upper trapezius.

Normally, you would grab the barbell and raise it without bending your elbows.

The same exact situation can be observed after rotating your body by 180 degrees.

Instead of the barbell, you have a pull up bar or rings

and instead of the weight, you've got your body.

At first the movement can be somewhat confusing, but after a few sets

you'll easily get used to using the proper muscles.

The move is quite difficult on the bar, because you have to constantly pull with your lats

to keep your body from falling down.

Good way to aproach this problem is to do the shrug in tuck position.

This way you can keep the center of mass of your body under the pull up bar.

An alternative would be to use the rings instead.

This way you can keep your body ideally between your hands.

I'm not gonna show you a proper shoulder-specific workout,

because I do those exercises scattered all over the week in different training sessions.

I don't think you need the whole separate workout dedicated for the shoulders.

Doing these exercises in combination with pull or push session

enough to send your shoulders a massage

'Hey guys it's time to grow stronger and bigger'.

That's all for today. Thanks for watching, hope you liked the video and see you in the next one.

For more infomation >> How to Get BIG Shoulders with Calisthenics - Duration: 8:37.

-------------------------------------------

Ribeye Steaks On The Weber Sear Grate | Beautiful Grill Marks | Gourmet Barbecue System - Duration: 8:28.

hey everyone welcome back to another exciting episode of Baum Grillin'z today

I'm very excited I finally got one of my attachments for the gourmet barbecue

system that I've been wanting for a long time when I first purchased my Weber

this was the attachment that I meant to get right away but I never did but now I

got it! I've got almost all the other attachments now I have the sear grate

and I'm very excited about it. so today what we're going to do is we're going to set

this thing up and we're going to cook some steaks on it and we're going to see

how nice these sear marks will come out when we use that sear grate so I hope

you guys enjoy this video let's get our charcoal started we're going to heat

that up. get our sear grate on top and then we'll get to rolling let's

do it okay so for this cook we're going to use

some lump charcoal this stuff it burns a lot hotter right when you put them

steaks on there it's going to sear it perfectly I like to use lump charcoal

just for that if I'm going to do a longer cook you might use briquette

because it lasts a little bit longer this stuff it will cook real hot but not

as long as a briquette for doing steaks and stuff this is what I recommend this

is what we're going to use today let's get it in here

fire it up

now that we got our charcoal going that's going to take about, I don't know 20

minutes or so to get heated up we're going to just prep our steaks so that

the seasoning can kind of just soak in let's do that all right

so for our seasoning on our steak we're just going to use some simple

ingredients here we're going to use some onion salt garlic salt now I'm putting a

bunch on here we're going to use some onion powder some garlic powder

whoo and some pepper. pat that in and kind of work it in there a lot of

seasoning guys it's going to be good tell you what I will flip it over do the

same thing

now make sure you always wash your hands after touching raw food you don't want

to contaminate nothing. don't wanna make yourself sick all right our charcoal is

nice and hot it's ready to go let's get this grill set up here now we're going

to want to move those right into the center there down here go ahead and put

that puppy right on the top oh boy

the grill is ready our steaks are prepared

let's throw them right on top of that sear grate

ah yeah ah that smells excellent

now we're going to let them sit for about four minutes on this side then

we're going to flip them and do another three or four minutes we're going

to try to shoot for medium, medium-well see how it turns out okay they are ready

to be flipped let's take a look at that whoo

I like that I only have to flip it once to get them cross hatches

mmm look at the those! oh man oh you guys that looks so good

that looks so good hmm I wish you guys could smell it all right well let them

sit there for just a few more minutes and then we'll cut into it

they are ready to come off let's get them off and we're going to let them sit

for a little bit let them rest whoo that looks excellent look at those oh man

that looks delicious dee-licious okay we're going to let them sit for

just a few minutes and then we'll tear into one of them

well while those steaks rest we're going to throw on some chicken

breasts we're just going to try that out too. gonna do a little bit of some of

the same seasonings we had okay we got our seasonings on them chicken breasts

let's throw them on we're just going to try to sear them real quick get some

nice grill marks on them and then we'll move them over to indirect

give them a flip real quick little rotation getting them nice little grill

marks on there and then we'll keep cooking them after this we'll move them

to indirect and we'll get up to that proper temperature finish that on

indirect so we'll just kind of move it off the sear grate there let them cook

till they're ready. all right there you have it got ourselves some steaks

and some chicken cooked on the weber sear grate I am so excited about that you

know you eat with your eyes before you eat with your mouth so you want it to

look good right I mean those look beautiful I just like to look of the

grill marks on a nice steak I am so excited to tear into these all right

let's do it let's cut into one of these and see how it tastes

Oh oh that looks good good good nice fat on there perfect what do you think of

that huh all right let's take a bite oh

oh man alive whoo that is amazing that is so good I love garlic I love

garlic I love onion powder I love all those

ingredients I showed you guys it's just some of my favorites and it really works

well on a steak all right now let's try the chicken oh yeah mmm

that is an excellent piece of chicken mmm

if you can't tell I'm very excited about this sear grate it has made such an

excellent looking piece of meat I love it I am just so excited that I got it I

hope you guys enjoy this video as much as I enjoyed preparing it for you guys

and I hope that you guys will give me a thumbs up you'll hit that subscribe

button join me on some more on my video if you

want to check out more of my videos go check out my channel and I am so excited

that you guys stopped in to check out how this Weber sear grate works I'll

see you guys later Baum Grillin'z Out! Grillin is a livin

For more infomation >> Ribeye Steaks On The Weber Sear Grate | Beautiful Grill Marks | Gourmet Barbecue System - Duration: 8:28.

-------------------------------------------

We're Doing This - Letters to July - Duration: 1:28.

Dear July,

Apparently we're doing this.

I've never felt any particular affinity to you as a month.

In childhood you were a time for family vacations and Summer Camp, for extended sewing projects

and lazy days by the pool.

July has always been a fly over month for me.

A month to get through the flurry of excitement at the beginning of summer in June

and the tons and tons of activity getting ready for the new school year in the end of

August.

I haven't really been out of school long enough to have feelings of July.

So July, I don't really know who you are.

What you are?

My life lately has been a series of transitions, and this month is shaping up to the the most

transition-y of them all.

So we'll see how this goes.

Love, Rachel

For more infomation >> We're Doing This - Letters to July - Duration: 1:28.

-------------------------------------------

HP Unboxing and Setup - Duration: 27:01.

For more infomation >> HP Unboxing and Setup - Duration: 27:01.

-------------------------------------------

Chain Mail Terms and Techniques Used in Chainmaille GutsyGuide: Mastering the Basics - Duration: 2:18.

We are so close to getting our hands

dirty.

Very exciting times! There are just a few

more things you need to know before we

dive in. You will hear me using the

following terms. Here's what they mean.

Through the same path means you have

already placed a ring into your pattern

and need to duplicate the process with

another ring directly beside it.

An XYZ chain. Each number designates how

many rings are in each position of the

chain. For example a 2-2-2 chain

would be two rings connected to two

rings connected to another two rings.

A 3-3-3 chain would be three

rings connected to another three rings

connected to another three rings.

The phrase "most recently added" refers to

the ring or ring added to the chain last.

The ORAAT method or the O-R-A-A-T method

describes the process of weaving one

ring at a time. Speedweaving, which you

will soon learn how to do, refers to

weaving multiple pre-opened and

pre-closed rings at once. A segment is a

grouping of rings, usually a complete

sequence or progression of a weave.

A section is a grouping of segments,

usually a complete sequence or

progression of a pattern.

And just like that, we're off to chainmailler's bliss!

For more infomation >> Chain Mail Terms and Techniques Used in Chainmaille GutsyGuide: Mastering the Basics - Duration: 2:18.

-------------------------------------------

Welcome to Your Mastering the Basics Chainmaille Course - Chain Mail Tutorial - Duration: 3:23.

Hey guys!

It's Heather from GutsyGirl Designs!

I'm thrilled that you're here!

Just a little bit about me as we get started.

Currently, I have two jewelry brands: Captibel Designs, which features starfish and shell

jewelry from Sanibel and Captiva as well as the edgier GutsyGirl Jewelry, which offers

chainmaille, washermaille and captured crystal.

I am also part owner and managing member of the wonderful Harbour View Gallery in Cape

Coral, FL.

My education includes three bachelor's degrees and a master's degree in instructional technology.

To be clear, I have the monopoly on nothing, but I do have a substantial amount of knowledge

to pass on.

Since my jewelry design is all self-taught, much of that knowledge has been hard fought

and hard won as painfully figured it out through sometimes very expensive trial and error.

I'm hoping I can help you avoid some of that pain!

Absolutely no experience is necessary to succeed in this course.

All you need are some tools, supplies and the desire to become a proficient chainmailler.

The purpose of this and all GutsyGuides is to not only show you how to make fun and fabulous

projects, but to give you a brand spanking new skill set that you can translate into

creating your own beautiful designs.

These are the projects that you will create in this course: The Ombre Earrings; The Mini

Link Ring; The Stretchy Keychain; The Twisted Gunmetal Bracelet; The Textured Circlet Dangle

Earrings.

The Shaggy Loop Beaded Ankle Bracelet; The Striped Pillar Earrings; The Epic Sunrise

Necklace, with a bonus of Epic Sunrise Earrings; The Beaded Hath Panja, with a bonus conversion

to a Barefoot Sandal; and the Graduated Lariat Necklace.

Over time, I will be adding more bonus projects to complement the core projects listed here.

This course provides material that is targeted to all types of learners.

Whether you learn best by seeing, hearing, reading or doing, this GutsyGuide presents

concepts and examples in ways that will make sense to you.

Every video lecture includes closed captioning and separate lecture notes if you learn best

by reading.

There are also downloadable color charts that detail the beaded designs as well as ring

graphics that detail each type of chain.

Mastering the Basics completely prepares you to learn intermediate and advanced weaves,

but those weaves are not included in this course.

Once you purchase the course, you are welcome to reproduce any of the projects to make for

yourself, as gifts for family and friends, or even to sell for profit.

I am here to help you in any way that I can, so please feel free to use Udemy's interactive

platform to ask me questions, or to post pictures of your amazing works in progress!!

We've got a lot happening in this course, so let's get a move on, shall we?

For more infomation >> Welcome to Your Mastering the Basics Chainmaille Course - Chain Mail Tutorial - Duration: 3:23.

-------------------------------------------

All About Chainmaille GutsyGuide: Mastering the Basics - Learn Simple Chain Mail - Duration: 1:46.

Hi there!

And welcome to your Mastering the Basics Chainmaille GutsyGuide, where I will give you step by

step instructions on how to turn this...into this!

I'm Heather, the artist, designer and owner at GutsyGirl Designs.

If you're looking for a thorough foundation in the timeless art of chainmaille, this is

the course for you.

In this GutsyGuide, you will explore the world of jump rings, tools, metals and aspect ratio.

You will construct multiple variations of seven different types of chain.

You will practice One Ring At A Time weaving and progress right to speedweaving.

I will provide detailed, step by step instructions on how to create ten of my original designs

using only the simplest of weaves.

At the end of this course, you will truly be a master of the chainmaille basics.

Whether you're a chainmaille newbie who's never held a pair of pliers or a chainmaille

dabbler who would benefit from a thorough foundation in the basics before moving on

to more complex weaves, you will find value (and fun!) in this course.

A portion of the proceeds from every GutsyGuide sale goes directly to non-profits that elevate

women and girls.

So you're not only investing in yourself, you're actually investing in a better life

for those who need it most.

If you'd like to experience going from this...to this...or if you want to transform this...into

this...you've come to the right place.

Don't forget to check out the free content below, which contains actual excerpts from

the course.

If it looks like something you'd enjoy, I look forward to seeing you in class!

Seriously!

We'll have so much fun!!

For more infomation >> All About Chainmaille GutsyGuide: Mastering the Basics - Learn Simple Chain Mail - Duration: 1:46.

-------------------------------------------

Opening to Flatliners VHS (02-13-91) (Canada) (1867 🇨🇦 2017) - Duration: 9:31.

For more infomation >> Opening to Flatliners VHS (02-13-91) (Canada) (1867 🇨🇦 2017) - Duration: 9:31.

-------------------------------------------

ไม่ต้องกลัว (No Need to Fear) #เฟรมบุ๊ค | Make It Right รักออกเดิน Season 2 (+ENG SUB) - Duration: 3:44.

Frame: Let me stay with you.

Book: I want to be here for thinking alone.

Frame: Stay alone, Is it's good?

No matter when, time will still move on

No matter when, everything must change

Because life changes every day

But my heart is certain and still the same

My embrace will envelope you every day

And I refuse to change

And now that you're suffering

It's no different...

from my feelings

I'll look after you alone forever

I'll be at your side, regardless of where you are

I'll stay and be your final man, and I won't go anywhere

I want you to trust a guy like me

I'll love you alone, I promise

Because time won't change my mind

There's no need to fear

We'll pass through it together

There might be some people who come in

then leave far away

Some people we just meet, then time separates us

But I'm not one of those

And now...

Book: Frame...

that you're suffering

Book: Can you leave now?

It's no different...

Frame: But I want to stay with you.

from my feelings

Frame: I want to take care for you.

I'll look after you alone forever

I'll be at your side, regardless of where you are

I'll stay and be your final man, and I won't go anywhere

I want you to trust a guy like me

I'll love you alone, I promise

Because time won't change my mind

There's no need to fear

We'll pass through it together

(Book: Thank you.) We'll pass through it together

We'll pass through it together

There's no need to fear

We'll pass through it together

For more infomation >> ไม่ต้องกลัว (No Need to Fear) #เฟรมบุ๊ค | Make It Right รักออกเดิน Season 2 (+ENG SUB) - Duration: 3:44.

-------------------------------------------

HP Last Look - Duration: 11:34.

For more infomation >> HP Last Look - Duration: 11:34.

-------------------------------------------

REPLAY: FREE 2'000 GEMS TOURNAMENT | SUBSCRIBE FOR PASSWORD | 2v2 BATTLES | CLASH ROYALE - Duration: 3:06:09.

For more infomation >> REPLAY: FREE 2'000 GEMS TOURNAMENT | SUBSCRIBE FOR PASSWORD | 2v2 BATTLES | CLASH ROYALE - Duration: 3:06:09.

-------------------------------------------

A day at the Boardwalk | Au pair Everyday #11 - Duration: 3:11.

For more infomation >> A day at the Boardwalk | Au pair Everyday #11 - Duration: 3:11.

-------------------------------------------

Quebra-queixo - Duration: 3:06.

For more infomation >> Quebra-queixo - Duration: 3:06.

-------------------------------------------

Why We Never Got To See Jackass 4 - Duration: 8:24.

There's been speculation about another Jackass sequel since the credits rolled on Jackass

3D in 2010.

That last incarnation of the gross-out prankfest was so popular that Paramount released Jackass

3.5 a year later, which was full of unrated and outtakes from 3D.

"This is the flying nut high five!"

But fans still haven't had their fill of the death-defying stunts and excrement-centered

pranks they've grown to love in the first three movies.

In the six years since Jackass 3.5, there's been a ton of buzz about the next installment.

Paramount Pictures supposedly registered a bunch of Jackass 4-related domain names.

Johnny Knoxville said in a Reddit AMA that there were "no plans for another movie," but

they were "open to doing another."

Director Jeff Tremaine announced it would be shot in Australia, and Bam Margera even

let it slip that they were toying with a Jackass sequel named in honor of the crew's late buddy,

Ryan Dunn.

"We just started talking about it.

We want to call it 'We're not Dunn yet, like D-U-N-N.'"

So why hasn't another sequel happened yet?

Is there a worldwide shortage of tasers and poo-cannons that we're unaware of?

Not quite.

Here's why we never got to see Jackass 4.

Johnny Hollywood

Though the show and movies were definitely a collaborative effort, Johnny Knoxville has

always been the pointman for the wild Jackass crew.

He doesn't always do the craziest stunts, but he brought a lot of the star power that

transformed Jackass from a collection of underground stunt clips into a multi-million dollar TV

and film concept.

"Hi, I'm Johnny Knoxville and welcome to Jackass!"

Between the first two Jackass movies, Knoxville made the jump to actual films, with starring

roles in The Ringer and The Dukes of Hazzard reboot.

And yes, he still returned for Jackass 3D, but he's also talked about the desire to make

films with a narrative.

In 2016, he told Complex about a film he's working on, saying, "It's not Jackass but

all the stunts are done in the vein of.

It's pretty crazy.

It's a scripted film with me doing the stunts."

That film is about a real-life theme park called Action Park, which was tied to six

deaths during the late '70s and '80s—making it the only theme park in the world deadlier

than Jurassic Park.

So, while Knoxville clearly still has the itch to perform crazy stunt work, it seems

like he also wants to tell a story that's about more than a bunch of guys getting whacked

in the balls.

Star schedules

With Knoxville's career more or less taking off, the rest of the guys have had to turn

to other venues to keep the paychecks coming in.

Steve-O is busy nurturing a fledgling stand-up comedy act, while Chris Pontius, Wee Man,

Preston Lacy, and Dave England have basically taken the Jackass concept and applied it to

a live show.

In 2016, they went to Australia with their "Filthy Seppo Tour," an on-stage mix of stunts

and comedy routines.

But for the most part, they seem to be just biding their time until the next Jackass reunion

brings them all back together.

In an interview with The Daily Journal, Preston Lacy admitted that the next Jackass sequel

hinges entirely on Knoxville's involvement.

"Hopefully, we'll do another movie.

We're just waiting on Johnny Knoxville's schedule.

… In Hollywood, unless you have a contract, nothing is nothing."

Steve-O seems to have the same sentiments, but he put it a lot more bluntly.

He told UPROXX:

"...some of the guys are sort of less busy than other guys, and kind of feeling really

desperate to get another movie going.

Every once in a while an e-mail will be sent to everybody from one of the guys in the cast

saying, "Come on!

Come on!

Let's make a movie.

Let's make a movie."

It seems like a pretty clear sign that without Johnny Knoxville's involvement, that movie

will probably never get off the ground.

A dark cloud

Ryan Dunn's tragic death in a drunk-driving accident came right on the heels of the release

of Jackass 3.5 and had a devastating effect on the Jackass crew.

Dunn and his passenger, Zachary Hartwell, died when Dunn lost control of his Porsche

which he was reportedly driving "between 132 and 140" mph.

His blood alcohol content was .196 at the time of the crash.

Both director Jeff Tremaine and Johnny Knoxville penned touching tributes to their fallen friend

on Knoxville's blog.

In Tremaine's entry, he writes, "He was such a huge part of our family and it is forever

changed without him."

Dunn was also Bam Margera's best friend, and Margera later admitted that he'd spiraled

out of control after Dunn's death.

During an episode of Family Therapy, Margera said, "Since Dunn got in that crash, everything

changed dramatically, and instead of drinking for fun with your friends, [it] turned into

drinking to forget."

While a sequel is still possible, the loss of a beloved friend and castmate certainly

cast a dark cloud over any future Jackass project.

Margera's sobriety

After Dunn's death, Bam Margera's drinking spiralled out of control, leading Steve-O

to express his doubts over whether Margera could even get himself together for a sequel.

In a 2016 Reddit AMA, he said, "If Bam can stay sober and healthy, I suppose it's possible,

but I think it's unlikely."

And it's not like Margera is chomping at the bit to throw himself back into the intense

atmosphere of a chaotic Jackass set.

"Sup?

Not much, how you been?

High five!"

In fact, he only just resurfaced lately, in Spain of all places, where he gave an interview

to Jenkem in which he said he only cares about getting back into skateboarding.

"Right now, I just wanted to make sure that I had no obligations at all towards TV or

any f---ing Hollywood commitments.

I just wanted to know that I could go to Spain and skate for as long as I want and not have

to deal with any bulls---."

That doesn't sound like a guy who's dying to get catapulted out of a shopping cart,

electrocuted, or branded on the buttcheek again anytime soon.

"You ready?"

"No.

Go!"

Steve-O isn't interested

For his part, Steve-O seems like he's just plain moved on from the show and movies that

made him famous.

The star famously battled with his own addiction issues during the show.

"Ummm... using ketamine, PCP, cocaine, nitrous, nitrous oxide…"

But he's since cleaned up, and he told The Daily Beast that on top of focusing on his

new stand-up career, he's also searching for a new purpose in his life.

"Now my goal is to find separation between me and that character.

To find separation between Steve-O and whoever I am—and more than that, for whoever I am

to find fulfillment and validation from within."

That's a big turnaround for a guy who once dove head-first into Mike Tyson's fist, just

because he could.

But fans don't have to worry too much about the possibility of a Steve-O-less Jackass

4 since he also told Vice:

"I almost don't want there to be another Jackass movie because I've worked hard to build my

own momentum, and for me to have a little bit of traction, and to be able to be getting

away with having a career beyond Jackass…

I want to keep that going.

But I would never turn down anything Jackass-related."

Aging out

Hard to believe, but Johnny Knoxville is now closer to 50 than 40.

And in the two decades that Knoxville battered his body for the show and movies, he's racked

up innumerable injuries, most notably the time he broke his urethra during a motorcycle

stunt.

"The doctor said that just a couple centimeters down and that it'd be lights out for old Leeroy."

Steve-O brought up the cold hard truth about aging in an email to his buddies:

"Hey, I love working with you guys.

We're all great friends.

It's something really special that we have, but with that said, as excited as I am to

work with you guys, if we're going to another project we need to figure out a way to get

out in front of it and acknowledge we're old.

Because we're old."

And even though he's not exactly thrilled with the prospect of aging, he also told The

Daily Beast, "Now I'm in my forties and I can't post a picture without someone commenting,

'Dude, you got old...I think I'm pretty realistic about it.

It just points to what's important is to find separation from that."

Director projects

Jeff Tremaine is the director and driving force behind Jackass.

His skate magazine, Big Brother, served as the inspiration for the show, and even employed

almost the entire cast before they ever had a deal with MTV.

"I thought I could make a TV show out of it.

And MTV just loved it.

They ordered a series."

And because hanging out with notorious bad boys is kind of Tremaine's thing, he parlayed

his Jackass success to tell the story of "the world's most notorious rock band," Mötley

Crüe.

In 2016, he produced a documentary about the band's final tour, and recently announced

that he was finally been attached to direct a feature biopic about the band, called The

Dirt.

It will be Tremaine's first time directing a feature outside of the Jackass series.

Let's face it: Bad Grandpa was basically another Jackass.

"Try to just adjust it a little…"

"Whoa!

Stop!"

Tremaine told ScreenCrush, "Dirt is something I pursued with everything I had.

I've wanted to make this going back to 2001, when we were just planning the first Jackass

movie."

Outside of the Jackass-sphere, Tremaine has been chained to the skater/prank show genre,

with producer credits for Nitro Circus, Dudesons in America, Rob Dyrdek's Fantasy Factory,

and Ridiculousness.

But it seems he's ready to take a legitimate seat in the director's chair.

Plus, as far as we can tell, a 2014 Daily Mail interview was the last time Tremaine

even spoke to the press about another Jackass installment.

Sounds like he's in no rush to get back to it, and without Tremaine behind the camera,

Jackass 4 will probably never happen.

"Hello, my name's Johnny Knoxville and I'm about to end this movie."

Thanks for watching!

Click the Looper icon to subscribe to our YouTube channel.

Plus check out all this cool stuff we know you'll love, too!

For more infomation >> Why We Never Got To See Jackass 4 - Duration: 8:24.

-------------------------------------------

BIRTHDAY LUNCH - Acropolis Restaurant - Chattanooga, Tennessee, USA - Duration: 2:01.

Greek Salad

Moussaka

Fried Fisherman's Platter

Greek Spaghetti

Baklava Cheesecake

Strawberry Patch Cake

Happy Birthday to me!

For more infomation >> BIRTHDAY LUNCH - Acropolis Restaurant - Chattanooga, Tennessee, USA - Duration: 2:01.

-------------------------------------------

TOP 7 HOKAGE com a Habilidade Única mais PODEROSA🎓 | Canal TOP 10 🙌 - Duration: 6:16.

Save Clan,

Welcome to another TOP 10 Channel VIDEO, today I'm going to talk about a much requested channel theme.

It will be about the 7 Hokage of Anime Naruto, it's very interesting ..

Only before I have a NEW!

We made a Partnership with the Naruto Amino Application, I do not know if you already know.

If you still do not know, I will basically explain how it works!

Now if you already know is even better, just enter there interact with me, and can participate,

From the next video on our channel.

You have the app for both Android and IOS.

Just DOWNLOAD on your mobile device just as I downloaded it here.

I already use it for some time, and super recommend it. It has many interesting features ..

You may be creating Blogs, it works similar to Facebook posting,

Where you can comment on animes, make TOPs about Characters you like,

You can also create polls, so people can interact with you

You can add and meet new people, the interaction the app gives you is very good!

I super recommend you Download, and make new friends...

Follow me there too, I'll leave my Profile on Description!

Now I will explain how using this application you have the chance to appear in our future video!

Basically what you have to do:

You will be entertained on my Profile of NarutoAmino follow me:

And taking part in the Poll I did there, I asked a question with 3 videos themes!

The topic that has more VOTES there will be the next video that I will bring here on the channel.

But besides the Voto leave also your comment, related to your choice!

The reason for choosing this Theme .. And the comments that you find most interesting

I'll choose to send Save on Future channel video

So Download Application has both for IOS and Android, I'll leave the Link in the description!

Follow me on Naruto Amino too, to exchange ideas where possible ..

Now let's go to the TOP that is very interesting!

As we know in Konoha had a total of seven Hokage so far.

They are among the strongest characters in the Naruto series.

But what we also know that each hokage has its own unique ability

Like the Mokuton technique of Hashirama for example

In today's video I rated the hokages according to their unique abilities,

So be very attentive to this criterion, I am not analyzing only their full strength.

And of course as I always say the top is based on my personal opinion

If you think differently as soon as the video is over you comment on what you would change.

Hatake became the sixth Hokage after the War.

However, Kakashi lost his Sharingan, which was replaced by a normal eye.

This also meant that Kakashi could no longer use RAIKIRI, since Jutsu depends

Much of the Sharingan.

However, Kakashi developed a new Jutsu, Release of Lightning: Purple Electricity.

This Jutsu is a long-range technique that shoots lightning from afar.

It is also strong enough to summon rain clouds if it is thrown into the air.

Hiruzen was the third Hokage of Konoha.

He was the second person, who achieved the title of "God of the Shinobi".

This was mainly due to the fact that Hiruzen had dominion over all

Known jutsus in the village of Folha.

Hiruzen was a student of the First and Second Hokage.

As his unique ability, we can cite the transformation of the monkey Enma into a stick,

Of an incredible resistance almost unbreakable, that had the capacity to cut anything.

Minato was the fourth Leaf Hokage.

He became known as a prodigy, who is born one with each generation.

Minato holds the highest scoring record at the Academy.

His unique technique I can cite the Rasengan that everyone knows was very powerful.

And I just did not use Hiraishin in Jutsu, because it was not his only technique since

Tobirama who invented the technique.

Tobirama Senju was the younger brother of Hashirama Senju.

He was named the Second Hokage after Hashirama's death.

Tobirama Senju was known as a genius.

He has developed numerous techniques on his own.

Like Edo Tensei, Hiraishin no Jutsu among others.

But as his unique ability, I will mention his mastery of water-type Jutsu, none

Another Hokage managed to overtake him in that matter.

She was the fifth Leaf Hokage.

Tsunade was part of the legendary Sannin.

She is very powerful and possesses an insane force and great reserves of chakra.

Tsunade's unique ability was to have awakened the Byakugo technique, which almost made her immortal

During their battles.

Hashirama was the first Leaf Hokage.

He founded the village with his best friend and rival, Uchiha Madara.

Hashirama was a very powerful shinobi, who was respected all over the world shinobi.

He also became known as "God of Shinobi" And as everyone knows his ability

Unique was the powerful Mokuton, a technique that had the release of wood and was a

Of the strongest in the anime.

Kiba

Dream never give up...

He was the son of the Fourth Hokage and became the seventh Leaf Hokage

Naruto has the nine tails sealed inside him and managed to control her power completely

But I will consider as his unique ability the power he receives from Hagoromo in the Fourth Ninja War

Making the Hokage the single most powerful skill in anime.

Well this was the video of today, if you have a different opinion, comment there for us to debate in the comments

And do not forget to download the Naruto Amino app, choose the theme of the next video here on the channel

And now let's go to the Salves of the 3 MYTHS of Today

#I am Preparing My Cabinet o /