Hi YouTube Hi everyone Hello Welcome to Animal Land. I made a mistake
As for what failed, I removed the sprocket last time
I forgot to take a movie to remove the bearing afterwards
I noticed that I was not editing
yeah yeah! It was that kind of feeling
I will do the front side suddenly.Since the structure is basically the same, remove the front side
After that, edit with the video of the rear side
Please take a look, Let's get started
The way is the same as Rear
Hold one side like this
Turn the other bolt
It was 17 mm
With this, this side has come off
Completely remove
There are two washers. I will put it here
Next time I will unlock (I removed it now) It should be easy to disengage
Because there is no lock, it can easily come off
It will come off
I got off, I just got out of the way It is getting like this
Do you understand? It is the part which is the rail through which the bearing passes
Brown grease is attached
I will put this in a box
This black part
Here is written SHIMANO JAPAN.I can not get out of here
Do you understand, bearings are visible inside
In the case of the rear it looks slightly different. This is a cup.You can check it later on the video
I will remove it.
OK, I will lift it as it is
OK, it was out
Since there is a possibility that the bearing falls, I will work on the box
OK, please look.Such a stick appeared
It is a rail of a bearing
This will be like this
Grease is pretty dizzy
I will check the current grease condition
Let's touch it.
It does not seem to be solidified
This grease is still in use
Grease is no better in this color
Wash off dirty grease
I have to remove the bearings first Remove the bearing with tweezers
I got out
Grease is attached, especially cracks and scratches do not appear to be absent
I do not know until washing and checking
1, 2, 3, 4, 5, 6, 7, 8, 9, 10 It is 10pieces.
There were nine bearings on the rear
I got 10pieces. I will wash the bearings that I took earlier.
10pieces
cold
It is like this, 10pieces
Is beautiful
It is intact
I'll lay it next to you Remove the opposite bearing
OK, 10other side was also taken
I will also clean other parts
After cleaning this
I forgot to shoot a movie I forgot to switch the video camera
I have taken a picture from where I attach a bearing
I did not notice until I started editing things I could not shoot.
What is that?
Well that sort of thing It seems that it happens occasionally
It is common to take a picture again as soon as you forget to switch
It is the first time I realized that I completely forgot to shoot and started editing
Honestly, it is a state of pale face
It became beautiful.
Here also
This is so dirty
Can I do it?
Cover with waste so as not to scatter around
It is amazing.
It can be awesome. This is amazing
Grease is solidified like a plate It's hard, it's not soft
It looks like there are no scratches inside, Good
Can you see it, it became beautiful
There is also video on the rear side for moving images from here.
So, the front desk will do it fast forward
OK, it is the end after locking Please watch the video on the rear side
OK, I'll add grease here
The one with this side screw is the gear side
A sprocket will be installed.So, the stick enters from this side
So I will put grease on this side.Then turn the inside out and grease on the other side
start
Grease as many as before removing condition
It is gathering firmly
It seems like it's OK
I also add a lot of grease to BB
It is the same feeling
Since the amount of grease was small at the time of BB's animation,
I was told that my friend who is familiar with maintenance got more grease
I thought that it was
Actually watching various videos
I was greasing as much as it overflowed
All the parts that I do not need actually come out, so I feel that it is okay
That is why There is no need to overdo it
I think there is a moderate amount OK, I arranged the bearings like this
Make it Zoom
I put the bearings at the grease
Grease also on this
It seems that you can put it quite solidly Why?
Because there is a saucer here, I will add as much as to stay here
Because the gap between the bearing and the saucer is wide
So, I guess that is not enough.
I do not see grease entering the saucer.
I will push it in this state and try
I turned a lot.
There are parts that are not greased yet
It is about this level It seems that it is not enough yet though it actually went so much
So,
Grease also here
Please let me know if it is overdone Then I will remove it
Maybe this is OK
I saw some other videos Pretty damaging it.
This still does not protrude
I am worried that it will not protrude
It would be enough if only this included
This may be about exactly
OK, hold it so that it will not come out
Place it in the opposite direction
If this is the case the bearing will not fall
Ah! , I forgot to add one place
I have to put it here as well.I am not painting inside here
Grease was also applied between the bearings of the bearings, so they painted similarly
OK, next time I also add plenty of grease to this side
Place a bearing.It is safe because it will not fall below
OK All the bearings got on
Grease on this
Since grease will not be visible for a while if it covers
It is better to attach it at ease It is safe for me to be filled a lot
I saw the situation when I opened it so it was so amazing that this is OK
Grease also here
Since grease was thoroughly solid I will wear it.
Turn a lot of screws and insert
This is troublesome It's pretty long.
I think that it will protrude this time
It protruded a lot
This amount is just proof that it was too much
There is no problem
Wipe off
If this tightening is loose it will rattle
Tightening this too hard will not turn
We will make fine adjustments
And close the lock
Rock is here
I will install it like this
I will lock it.
Turn it around while tightening here I will do this later
First of all check the rotation state
Sounds good I will try to loosen it a little more
Loose is lightly turning
It is Good if there is no play at this time
I will find a subtle place
Here it is.Tighten here firmly
I will lock it when I can make adjustments This thin tool is necessary when locking
I use a thin wrench like this
And, I will tighten here with a wrench
Tightened OK
I will check again here
While checking I will check if it is rough
further
I will check if there is backlash
It is fatal if you are stiff here
It looks good
It is turning with a good feeling
How nice
I will retighten only once more
Okay, that's it.
I will install a sprocket
I should make the camera wide, it was already
I will put on sprocket
Let's play gloves when handling sprocket
OK
I bought Shimano's sprocket
It is a type of boss free
It is different from cassette sprocket It's boss free.
Even if it says that it is different from the cassette, it looks like a single cassette
Boss-free here is screws and it's all about tightening
It is the same as I just removed a while ago
I wonder if it is not so sharp, I will bring grease so I will bring it with my bare hands
gee, it hurts when you touch it with bare hands
I will only glove on one side
Grease here, here, here (screws) Attach here
Grease here
I always attach it to such a rotating part
You do not have to attach a lot here like a bearing
A little is fine.
OK
To fit in
Just turn
I do not idle so tighten by hand
The end
Also, tighten strongly with this boss-free bracket
Please fasten here tightly
(Even if you do your best here, if you ride it will rotate further and will tighten)
It is OK, like this
I caught it, it is completion.
It is done.
Completion
It sounds good
OK
All we have to do is attach it to the frame
OK
Is it wearing on the frame
If you attach it like this
The chain is still old.
Since I do not want to attach a new sprocket to the extended chain, I will not install it now
I will attach it to the frame after changing the chain
So leave it as it is
After all, both greased up.
I think that both feel good.
On the rear side
Grease up and
I exchanged this sprocket It is beautiful and it is shiny
The hub is also going to feel good to grease up
It used to be a little while ago but I heard from now
Please wear it and I'm looking forward to riding.
I think that this will end with this time
Those who seemed to be interesting this time movie thumbs up please
Those who have not subscribed to your channel nice to meet you Please
Bye
In Animal Land, various other videos such as this and such delivery are surely watching Please do it
No comments:
Post a Comment